Color scroller

Color scroller

A color scroller or color changer is an electro-mechanical lighting accessory used in theater, film, dance and concerts to change the color projected by stage lighting instruments without the need of a person to be in the vicinity of the light. A color scroller moves plastic "gel" color gel [actually dyed polyester and/or other base materials coated with dyes] into the beam of the light. It is generally attached to the gel frame holder at the transmitting end of a lighting fixture, so color is introduced after the beam characteristics have been defined by the optics of the lighting instrument. Most scrollers are controlled via DMX512 protocol, but some newer models (e.g. Wybron's Coloram IT) also utilize the RDM protocol. When color scrollers were first introduced around 1980, a number of companies produced them, including: Avolites, GAM Products, Morpheus Lights, Rainbow, Rosco Laboratories and Wybron Inc. Now the main manufacturers are: A.C. Lighting, Apollo, Morpheus Lights, Rainbow and Wybron (in alphabetical order).[1]


Types of scrollers

Interior view of a Chroma Q 6" scroller, with scroll.

Single string scrollers

The most commonly used type of scroller is the single string scoller. This type has only one string of color anywhere from 2 to 33 frames long.

Dual string scrollers

Dual string scrollers use 2 strings (one behind the other) and allow for a form of CMY mixing. The Chroma-Q Cascade and the Wybron "CXI" uses 2 gel strings to obtain a CMY mix. One frame of clear gel is positioned at the center of each gel string (50% DMX) with progressively denser frames of color positioned to either side of it. The first string has progressively denser yellow and cyan frames and the 2nd string and the second string has progressively denser yellow and magenta frames. This permits various YC, YM, and CM combinations to be achieved as a "static" color mix. There is a limited ability to transition "live" between mixed colors - although some transitions cannot be accomplished without passing through the clear center frame.

CYM color-mixing scrollers

Finally, there are "true" CYM mixing scrollers that utilize three independently controlled gel strings - namely, the ColorFader system manufactured by Morpheus Lights of Las Vegas, NV. Independent control of the gel strings permits users to cross-fade "from any color to any color" directly (without going through undesired colors as on a single or double string color changer).


Color scrollers come in many different sizes and are mountable on nearly every type of conventional lighting instrument. Sizes include:

  • 4 Inch (for smaller PAR 36 units)
  • 6 to 7.5 Inch (fits ETC Source 4 19°, 26°, 36° and 50° units)
  • 8 to 10 inch (fits PAR 56 & 64 units)
  • 12 inch (fits large sized Fresnel units like 2 KW tungsten units)
  • 15 inch (fits bigger Fresnels, like 5KW tungsten or 2.4 KW HMI units)
  • 20-30 inch (fits Thomas 8 Light and Thomas 9 Light units)
  • Large format scrollers for ETC Multi-PAR units


Input interface on a Chroma Q 6" scroller.

Most color scrollers use DMX512 addressing protocol. Each scroller unit is given an address or identifying number. Earlier scroller models used binary DIP switches to set the address, however most scrollers currently include digital addressing systems. Once addressed, the unit is then connected with other color scrollers and run back to a power supply (typically with 4-pin XLR cable. 4-pin is used to differentiate power lines from data.) The power supply receives the DMX control signal from the Lighting control console and distributes control signal (either DMX or a proprietary manufacturers signal) to each color scroller unit along with 24 volts DC. Depending on the manufacturer, power supplies can power anywhere from 1 to 64 units.

Some color scrollers are configured for "daisy chain" connection, by which 4-pin power/control cable feeds into and then out of a number of scrollers. The number of units that can be daisy chained together is limited by a head-feet restriction. Head-feet is defined as the total sum of the lengths of cable from each device to a single power supply. It is a way to account for the voltage drop in the power/signal cable caused the current drawn from each unit and the length of the cable. If you exceed the recommended "head feet" you may experience performance problems with all of the scrollers on the chain.

Other scroller systems, such as the Morpheus ColorFader, do not permit daisy chaining. Up to six standard ColorFader units (SFader or MFader) can be powered from a ColorFader PS-6 power supply - which is a simple unit that is generally hung on a pipe in close proximity to the active ColorFader units. Because independent "Home runs" (uninterrupted connection) of 4-pin cable reliably carry power and control signal directly to each ColorFader unit, the need to keep track of "head feet" is eliminated.

Some new models of scrollers are moving towards the RDM protocol and are using small LED screens for addressing and other settings on the unit. This new method of control allows for easier addressing and the ability to "talk-back" to each scroller (to get, for example, diagnostic information). Morpheus ColorFader3 units, among others, have direct push-button addressing for DMX with an LED display that provides complete set-up status information for each unit.

Color scrollers utilize from 1 to 4 channels depending on their capabilities. One channel is required for every string of gel (up to 3) and one channel is required for optional control settings. Optional settings include: Remote fan control (ability to control the fan's speed and on/off status), preset color string mixed color positions (for scrollers with multiple strings), preset effects/times, and control over the speed the string moves.

With the newer RDM protocol many more options can now be made available. These can include: Light sensor (to see if the fixture the scroller is attached to is on), temperature sensor, voltage sensor, timers, fan control, self test, gel string sensor (gives info on color, use, and if the string is broken). [2] Although RDM provides significantly more options, few maufacturers have yet implemented these features into existing products.

Color strings

Most companies offer two standard types of gel strings generally referred to as "theater" and for "rock and roll". Typically, the theatre scroll will contain subtler colors, while the rock and roll scroll will contain more saturated shades. A number of scroller manufacturers and third party vendors offer scrolls made with custom colors, assembled to a customers specifications, though these are non-standard items and carry a premium. A custom adhesive, known as high-temperature scroll tape, is also available to allow technicians to repair sections of scrolls that have become damaged. This scroll tape also allows for the fabrication of unique custom scrolls, though the cost in materials generally percludes the mass production of "home made" scrolls.


Below is an example, from Wybron Inc utilizing GAM colors [3], of a typical scroll set. Note that the first position on the scroll is actually a clear piece intended to afix the scroll to the scroller.[4]

Wybron Theatre 16 Frame String
Position Code Description
1. Clear Leader
2. G480 Medium Yellow
3. G385 Light Amber
4. G340 Light Bastard Amber
5. G335 Coral
6. G345 Deep Amber
7. G270 Red Orange
8. G195 Nymph Pink
9. G120 Bright Pink
10. G970 Special Lavender
11. G948 African Violet
12. G720 Light Steel Blue
13. G810 Moon Blue
14. G850 Blue (Primary)
15. G540 Pale Green
16. G690 Bluegrass
Wybron Rock-n-Roll 16 Frame String
Position Code Description
1. Clear Leader
2. G450 Saffron
3. G345 Deep Amber
4. G355 Amber Flame
5. G245 Light Red
6. G250 Medium Red XT
7. G120 Bright Pink
8. G995 Orchid
9. G948 African Violet
10. G930 Real Congo Blue
11. G810 Moon Blue
12. G835 Aztec Blue
13. G850 Blue (Primary)
14. G710 Blue Green
15. G690 Bluegrass
16. G655 Rich Green

Dichroic Color Changers

Introduced as an alternative to a color scroller, High End System's Colormerge unit was an add-on dichroic color changer. It was a color mixing unit made to be used with the ETC Source Four ellipsoidal fixture. Unlike a traditional color scroller, it was installed inside the unit between the reflector assembly and shutters. It provided CMY color mixing via dichroic glass plates. "Colormerge" was a relatively expensive device which lacked reliability - these problem ultimately caused it to fail in the marketplace. It was discontinued in 2004. [5]

More recently, the SeaChanger line by Ocean Thin Films accomplishes much the same thing but features a wide range of patented dichroic color wheels in an array of saturation levels, for added color possibilities. The SeaChanger unit is also much larger than the Colormerge and completely replaces the shutter assembly of a Source Four fixture. The SeaChanger has achieved a much higher level of commercial success.

In 2009, Morpheus Lights introduced the PacificFader line of dichroic color changers, which were specifically developed for use with the modular Selecon Pacific ellipsoidal fixtures manufactured by Philips Entertainment.  PacificFader units are available with either 3, 4, or 5 control parameters:  PacificFader3 provides C,Y,M color mixing for use with tungsten fixtures.  PacificFader4 adds a smooth optical dimmer/douser to the C,Y,M control, for use with energy efficient arc sources (CDM, MSR, MSD).  The top-of-the-line PacificFader5 adds Morpheus' extended range CTO filter, which can either be used to color-correct daylight sources to match tungsten units or to "bend" the CYM color mix for additional subtle color control.

See also

External links

Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Color gel — See also: Photographic filter Many color gels organized, some in gel frames A color gel or color filter (UK spelling: colour gel or colour filter), also known as lighting gel or simply gel, is a transparent colored material that is used in… …   Wikipedia

  • SeaChanger Color Engine — The SeaChanger Color Engine is an alternative to color scrollers in entertainment industry lighting that was released in 2005 by Ocean Optics. [ 2007 Ocean Optics Catalog ] ] [… …   Wikipedia

  • Outline of stagecraft — Stagecraft is a generic term referring to the technical aspects of theatrical, film, and video production. Stagecraft is distinct from the wider umbrella term of scenography. Considered a technical rather than an artistic field, it relates… …   Wikipedia

  • Intelligent lighting — A Martin MAC 550 intelligent light Intelligent lighting refers to stage lighting that has automated or mechanical abilities beyond those of traditional, stationary illumination. Although the most advanced intelligent lights can produce… …   Wikipedia

  • Gobo (lighting) — For other uses, see Gobo (disambiguation). A gobo in a gobo holder, which goes in a stage lighting instrument. The discolored portion is oxidation of the stainless steel caused by the high temperature of the lamp, but the gobo is still usable. A… …   Wikipedia

  • Parabolic aluminized reflector light — A Parabolic Aluminized Reflector luminaire 20 PAR cans A parabolic aluminized refle …   Wikipedia

  • Striplight — A striplight. A striplight is a multi circuit stage lighting instrument. Striplights are one of the most basic types of lighting fixtures available. They usually consist of row of lamps. A single striplight is usually wired internally into either …   Wikipedia

  • Theatrical property — Props set the mood for the musical number Food, Glorious Food in the musical production, Oliver A theatrical property, commonly referred to as a prop, is an object used on stage by actors to further the plot or story line of a theatrical… …   Wikipedia

  • Cyclorama (theater) — A band performing in front of a cyclorama. A gobo has been projected on it and it is washed with blue gelled lights A cyclorama is a large curtain or wall, often concave, positioned at the back of the stage area. It was popularized in the German… …   Wikipedia

  • Master electrician — The Master Electrician (also ME, Head Electrcian or HDLX) in a theatre is responsible for implementing the lighting design for a production drawn up by the Lighting designer. This involves overseeing the preparation, hanging, connection and… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”