Dark Spiner

The Dark Spiner is a Spinosaurus-type Zoid, one of over 200 species of biomechanical lifeforms depicted by TOMY's "Zoids" model, toy, and media franchise.Zoids
Zoid_name = Dark Spiner
ImageName =
Caption = The Dark Assassins' "Dark Spiner"
Model_number = EZ-060
Faction = Guylos Empire
Zoid_type = Spinosaurus
Crew = 1
Weight = 118
Length = 22.3
Height = 16.6
Speed = 240
Weapons = 144 mm Machine Gun x2, Electron Fang, Strike Laser Claw, Double Barrelled Cannon x2, Strike Smash Tail
Equipment = Jamming Blade Array

Overview

The Dark Spiner is a highly advanced Zoid used by the Guylos and later Neo-Zenebas Empires. Based on the electronics of the older Dimetrodon, it is the best electronic warfare Zoid ever made, utilising the fin on its back, (the "jamming blade") to disable enemy communications, sensory systems and targeting. The Spiner's jamming array also has two other abilities; it can generate devastating EMP blasts to disable enemy Zoids, as well as creating an ionization field that deflects enemy weapons fire.

While fast and agile, the Dark Spiner is rather underarmed for its size. The Zoid is not designed for direct combat, instead intended to support other forces in battle.

The Zoid's most notable ability is the capability to combine with the Killer Dome to form the "Killer Spiner" Fuzor. This fusion is beneficial to both Zoids; although it disables the Jamming Blade, the Dark Spiner is granted the Killer Dome's gattling weapons and pulse laser array, exponentially increasing its firepower, while the slow and awkward Killer Dome has a fast and nimble steed to carry it.

Battle Story

The Dark Spiner first appeared in ZAC 2101, serving as a part of the Eisen Dragoon unit alongside the Berserk Fury and other Zoids. Its first action was in support of Prozen's coup, aiding in the disruption of the enemy forces. While Prozen's army was destroyed, the Eisen Dragoons survived and became the core of the Neo-Zenebas Empire. In ZAC 2102, the Empire invaded the Helic Republic, the Dark Spiner again aiding their forces. Following the invasion, a network of Dark Spiners was set up to permanently disable the Helic forces' communications.

Unfortunately, the size and complexity of the Dark Spiner made it very expensive and difficult to mass-produce. As a result, the older Dimetrodon was reintroduced to support the Zoid. Consequently, the Republic reintroduced the Gorhecks design, the Gorheks’ Crystal Radar able to burn through the Dark Spiner's jamming.

Media appearances

Anime

Fuzors

The Dark Spiner's sole anime appearance is during "", where it is piloted by Malloy. It appears alongside its partner, the Killer Dome, (piloted by Malloy's brother, Rattle) as part of the Dark Assassins team. The Dark Spiner is particularly notable, as it is the first Zoid seen to fuse with another, combining with Killer Dome to create the much more powerful Killer Spiner, which is piloted simultaneously by Rattle and Malloy.

The Killer Spiner made its first appearance in the second episode, "1 + 1 = ?". Its first victims were the Black Impact team and their custom Blade Ligers, who were easily defeated by the Killer Spiner. Mach Storm ended up facing the Dark Assassins as well; their plan was to surround the Killer Spiner and bombard it with ranged fire, whilst RD and his Liger Zero closed the gap and severed the fusion with its Strike Laser Claw. However, the attack didn't go as according to plan and they very nearly lost the fight. With RD's Liger Zero and Helmut's Command Wolf slowly being choked to death, they very nearly lost, until the Killer Spiner's fusion time-limit ran out. With its power depleted, the Killer Spiner toppled over, leaving the Liger Zero the winner... until it fell over from exhaustion as well, and the match declared a tie.

The Killer Spiner would briefly appear at the start of episode 7, "The Unseen Enemy". During a training session, the Dark Assassins are assassinated themselves, by an invisible opponent, which was later revealed to be Keith and his Holotech Zaber Fang. It was not clear if the Spiner was destroyed or merely disabled.

In a later episode, a Dark Spiner was seen as a part of a group of Zoids slated for destruction; it was not stated if this was the same Zoid.

In the "Zoids: Fuzors" anime, besides allowing the Spiner to use the Killer Dome's weapons, the fusion also grants it the ability to raise a domed energy shield, and launch the Killer Dome's claws on thick cables to grab enemy Zoids, (similar to the Geno Saurer.)

Models

New Japanese Release

*Assembly required. (Snap-together, no glue needed. Scissors or X-acto knife recommended for trimming off excess plastic bits.)
*The model's colours are moulded into the plastic, and it does not need any paint.

The Dark Spiner kit comes on eight frames, along with a battery-operated motor, two body sections, a pre-constructed mounting, a semi-transparent canopy cover, twenty-four rubber caps and a small blue pilot figure. The Dark Spiner is moulded in light green, purple. and black, with silver claws, and a red canopy. Curiously the Zoid came with both Guylos and Zenebas insignias, making it the first Zoid since the 1980s to have Zenebas logos.

The Dark Spiner is one of the more complicated model kits in the Zoids line and is rather difficult to build. The Dark Spiner uses a pair of "AAA" sized batteries for motion, and is rare amongst Zoids that it has two motorised modes. In the first mode, once activated, the Zoid walks forwards with its arms waving and the tail sweeping side to side while the fins on its back ripple. In the second mode the Zoid stands still, the fins deployed forwards and rippling.

The Zoid's other main feature is its ability to connect to the Killer Dome. The Jamming Array can be removed, and replaced with the Killer Dome. In this mode, the Dome's features are motorised; as the Zoid walks forwards, the Killer Dome's claws open, its weapons rotate and its dome spins.

The Dark Spiner was released in 2001, with production continuing semi-regularly until about 2004. The Zoid sold poorly in Asian markets.

New American Release

The Dark Spiner was released as a part of the "New American Release" by Hasbro. Released in November 2001, this version was identical to the NJR version, except for the packaging. Like its NJR counterpart, it sold poorly.

The Zoid was also released by TOMY as a part of the "New Pacific Release".

Fuzors

The Dark Spiner was re-released along with the Killer Dome as the Killer Spiner, as a part of the "Fuzors" model line. The version was unchanged from the NJR, save for coming with a grey pilot and a different label sheet to reflect its allegiance in the anime.

Like all the other Dark Spiner versions, the Killer Spiner sold poorly.