Heat and smoke vent

Heat and smoke vent

Heat and Smoke Vents are installed in buildings as an active fire protection measure. They are openings in the roof which are intended to vent the heat and smoke developed by a fire inside the building by the action of buoyancy, such that they are known as "gravity vents".

Regulatory requirements

Heat and smoke vents are typically installed in buildings for the following reasons:

* Storage occupancies - The heat release rate from high piled storage commodities is expected to be very high. In such cases, it is desirable to vent the heat from the building if the temperatures in the building reaches sufficiently high levels to endanger the structural stability of the roof system. Smoke venting is desirable to increase the visibility in the interior space to facilitate manual fire fighting efforts.

* Large internal volume spaces – Venting smoke from large spaces which regularly contain large numbers of people, such as malls and atria [NFPA 92B Standard for Smoke Management Systems in Malls, Atria, and Large Spaces 2005 Edition] [NFPA 101 Life Safety Code 2006 Edition A.] .


Automatic heat and smoke vents are available commercially in two general categories [ NFPA 204 Standard for Smoke and Heat Venting 2007 Edition ] :

* Mechanically opened vent, powered by springs, pneumatic actuator, or electric motor.

* Drop-out vent – constructed of plastic which shrinks in the presence of heat (i.e., drop-out panel).

Interaction with automatic fire sprinklers

The majority of guidance available for design of heat and smoke building vents installed in buildings is restricted to nonsprinklered, single-story buildings [NFPA 204 Standard for Smoke and Heat Venting 2007 Edition, 1.1 Scope] . This is partly a historical consequence of the installation of heat and smoke vents in storage buildings prior to the installation of fire sprinklers as a widespread warehousing industry practice. Subsequent to sprinklers being installed in storage buildings as a widespread practice, there has been a lack of consensus regarding the nature of the interaction of sprinklers and automatic heat and smoke vents [NFPA 204 Standard for Smoke and Heat Venting 2007 Edition, Origin and Development] . This lack of consensus continues to this day [NFPA 204 Standard for Smoke and Heat Venting 2007 Edition, F.3] .

Automatic heat and smoke vents are permitted by model building codes in conjunction with control mode fire sprinklers, but are not permitted to be installed in with suppression mode fire sprinklers unless the vents are manually operated or have an operating mechanism with a thermal rating of not less than 360°F. [NFPA 1 Uniform Fire Code 2006 Edition, Chapter 34 General Storage,] .

ee also

* Smoke exhaust ductwork
* Pressurisation ductwork
* Grease duct
* Passive fire protection
* Active fire protection


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Smoke flaps — Smoke fl Commercially a smoke flap can take the form of a metal, tin, or other alloy and can be manipulatable by hand or lever, and appears in home chimneys, stoves, or boilers. The more common use of a smoke flap is on the Native American Plains …   Wikipedia

  • T-54/T-55 operators and variants — Infobox Weapon name= T 54/55 caption= US Army recognition poster origin= Soviet Union type= Main battle tank is vehicle= yes is UK= yes service= 1947–present used by= wars= designer= Morozov (T 54), OKB 520 (T 54A and later) design date= 1945… …   Wikipedia

  • Pressurisation ductwork — is a fire protection system. It is used to supply a steady stream of fresh air to any area of refuge or designated emergency evacuation or egress route.Purpose* To ensure a positive pressure environment of clean outside air, free from smoke to… …   Wikipedia

  • List of Initial D characters and teams — This is a list of characters from the anime and manga series Initial D. Contents 1 Main characters (Fujiwara Tofu Shop) 1.1 Takumi Fujiwara 1.2 Bunta Fujiwara 2 Projec …   Wikipedia

  • Uniform Mechanical Code — Designated as an American National Standard, the Uniform Mechanical Code (UMC) is a model code developed by the International Association of Plumbing and Mechanical Officials (IAPMO) to govern the installation and inspection of mechanical (HVAC,… …   Wikipedia

  • Smoking (cooking) — Pork ribs being smoked Smoked beef sandwich …   Wikipedia

  • building construction — Techniques and industry involved in the assembly and erection of structures. Early humans built primarily for shelter, using simple methods. Building materials came from the land, and fabrication was dictated by the limits of the materials and… …   Universalium

  • Glossary of firefighting — Note: This list does not include firefighting equipment, i.e., tools and apparatus used by firefighters. Please refer to Glossary of firefighting equipment for such terms. : Note: This list is incomplete. You can help Wikipedia by… …   Wikipedia

  • Wok — Stir frying (爆 bào) with a wok A wok (in Cantonese; simplified Chinese: 镬; traditional Chinese: 鑊; Jyutping: wok6) is a versatile round bottomed cooking vessel originating in China. It is used especially in …   Wikipedia

  • Emit — E*mit , v. t. [imp. & p. p. {Emitted}; p. pr. & vb. n. {Emitting}.] [L. emittere to send out; e out + mittere to send. See {Mission}.] 1. To send forth; to throw or give out; to cause to issue; to give vent to; to eject; to discharge; as, fire… …   The Collaborative International Dictionary of English

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”