IEC 60309

IEC 60309

IEC 309 (now IEC 60309, 1999) is an international standard from the International Electrotechnical Commission for "plugs, socket-outlets and couplers for industrial purposes". Part 1 of the standard specifies general functional and safety requirements for any form of industrial high-current power connector. Part 2 specifies a range of mains power connectors with circular housings, and different numbers and arrangements of pins for different applications. The highest voltage allowed in the standard is 690 V DC or AC; the highest current, 250 A; and the highest frequency, 500 Hz. The temperature range is −25 °C to +40 °C.

In the United Kingdom, this standard was first adopted as BS 4343:1968 and has since been replaced by its European equivalent EN 60309:1999, catalogued in the BSI system as BS EN 60309:1999.

Keying

IEC 60309-2 connectors are produced in many variants, designed so that a plug of one type can only be inserted into a socket of the same type. Different current ratings (such as 16 A, 32 A and 63 A) are distinguished by different diameters of the circular housing.

Different voltage and frequency combinations are distinguished by the location of the ground pin (or a plastic projection called the "minor keyway", for connectors with no ground pin), as shown in the following table. The ground pin can be in one of twelve locations spaced at 30° intervals around the circle on which all the pins lie. Position 6 is at the same angle as the "major keyway", a projection on the plug casing that aligns with a notch on the socket. The ground pin has a larger diameter than the other pins, preventing the wrong type of plug being inserted in a socket.

A six-phase plus earth (6P+E) version also exists.

ee also

* Industrial and multiphase power plugs and sockets

External links

* [http://library.abb.com/GLOBAL/SCOT/SCOT296.nsf/VerityDisplay/12B61B88C2F36C37C1256FFF0077B723/$File/2CMC700001C0201_A_en_Short_Form_Catalogue_29004.pdf Catalogue 1SKC000013C0201 from ABB Industrial Plugs and Sockets]

Catalogue K1_Industrial Plugs and Sockets from SEZ a.s., Slovakia for download in PDF...
* [http://www.sez.sk/files/k1_v3_0_en_indOstrial_soekets_and%20plOgs_preview.pdf ...Here]

* [http://www.globetron.com/GlobetronPowerConnectors.pdf#page=1 Extended Catalogue]


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • IEC 60309 — DIN EN 60309 Bereich Elektrotechnik Titel Stecker, Steckdosen und Kupplungen für industrielle Anwendungen Kurzbesch …   Deutsch Wikipedia

  • IEC 60309 — Dos enchufes IEC 60309 conectados en montaje superficial sobre pared. IEC 60309 (anteriormente IEC 309) es un standard internacional de la Comisión Electrotécnica Internacional para Enchufes de uso industrial . El mayor voltaje permitido por la… …   Wikipedia Español

  • IEC 60320 — IEC connector redirects here. For other uses, see IEC connector (disambiguation). IEC 60320 is a set of international standards specifying non locking electrical power couplers for the connection of power supply cords to electrical appliance up… …   Wikipedia

  • IEC 62196 — DIN IEC 62196 Bereich Elektrofahrzeuge Titel Stecker, Steckdosen, Fahrzeugsteckvorrichtungen und Fahrzeugstecker Konduktives Laden von Elektrofahrzeugen Teil 1: Laden von Elektrofahrzeug …   Deutsch Wikipedia

  • Разъём IEC — Разъём IEC  это общее название для набора из тринадцати гнездовых разъёмов, монтируемых на силовой шнур (далее называемые разъём) и тринадцати штыревых разъёмов, монтируемых на панель устройства (называемых ввод), определённых спецификацией… …   Википедия

  • List of IEC standards — In order to distinguish standards published by the International Electrotechnical Commission numerically from other international standards, their number range was shifted in 1997 by adding 60000. So what used to be called IEC 27 is now… …   Wikipedia

  • CEE-Drehstromsteckverbinder — IEC 60309 (bis 1999 IEC 309) ist ein internationaler Standard für Stecker, Steckdosen und Kupplungen für industrielle Anwendungen . Er wurde 1989 von der Internationalen elektrotechnischen Kommission entworfen und 1992 überarbeitet. Er ist… …   Deutsch Wikipedia

  • CEE-Kupplung — IEC 60309 (bis 1999 IEC 309) ist ein internationaler Standard für Stecker, Steckdosen und Kupplungen für industrielle Anwendungen . Er wurde 1989 von der Internationalen elektrotechnischen Kommission entworfen und 1992 überarbeitet. Er ist… …   Deutsch Wikipedia

  • CEE-Stecker — IEC 60309 (bis 1999 IEC 309) ist ein internationaler Standard für Stecker, Steckdosen und Kupplungen für industrielle Anwendungen . Er wurde 1989 von der Internationalen elektrotechnischen Kommission entworfen und 1992 überarbeitet. Er ist… …   Deutsch Wikipedia

  • Campingstecker — IEC 60309 (bis 1999 IEC 309) ist ein internationaler Standard für Stecker, Steckdosen und Kupplungen für industrielle Anwendungen . Er wurde 1989 von der Internationalen elektrotechnischen Kommission entworfen und 1992 überarbeitet. Er ist… …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”