- Thrust-to-weight ratio
Thrust-to-weight ratio is, as its name suggests, the ratio of instantaneous
thrust toweight (where weight means weight at theEarth ’s surfaceSutton (7th edition pg 442) "thrust-to-weight ratio F/Wg is a dimensionless parameter that is identical to the acceleration of the rocket propulsion system (expressed in multiples of g0) if it could fly by itself in a gravity free vacuum"] ). It is a dimensionless parameter characteristic ofrocket s andjet engine s, and of vehicles propelled by such engines (typically spacelaunch vehicle s and jetaircraft ). It is used as afigure of merit for quantitative comparison of engine or vehicle design.The value is larger for an engine than for a whole launch vehicle; the engine thrust-weight is of use since it determines the maximum acceleration that any vehicle using that engine could theoretically achieve with minimum propellant and structure attached.
For a takeoff using pure thrust and no wings from the surface of the
Earth , the thrust-weight ratio for the vehicle has to be "more than" one. In general, the thrust-to-weight ratio is numerically equal to the "g"-force that the vehicle can pull, provided the "g"-force exceeds local gravity then takeoff can occur.Many factors affect a thrust-to-weight ratio, and it typically varies over the flight with the variations of thrust due to speed and altitude, and the weight due to the remaining propellant and payload mass. For valid comparison, thrust should be measured under controlled conditions. The main factors that affect thrust include freestream air
temperature ,pressure ,density , and composition. Depending on the engine or vehicle under consideration, the actual performance will often be affected by progressive fuel consumption (causing a rise in thrust-weight ratio),buoyancy , and local gravitational field strength.Examples
The
Russia n-made RD-180 rocket engine (which powersLockheed Martin ’s Atlas V) produces 3,820 kN of sea-level thrust and has a dry mass of 5,307 kg. Using the Earth surface gravitational field strength of 9.80665 m/s², the sea-level thrust-to-weight ratio is computed as follows: (1 kN = 1000 N = 1000 kg⋅m/s²)Aircraft
Note that the above duct engined aircraft do not have a thrust to weight ratio greater than one at maximum take-off weight, whereas rockets do.
Engines
References
Wikimedia Foundation. 2010.