Equivalent pulse code modulation noise
- Equivalent pulse code modulation noise
In telecommunication, equivalent pulse code modulation noise (PCM) is the amount of thermal noise power on a frequency-division multiplexing (FDM) or wire channel necessary to approximate the same judgment of speech quality created by quantizing noise in a PCM channel.
:"Note 1: The speech quality judgment is based on comparative tests."
:"Note 2: Generally, 33.5 dBrnC ±2.5 dB is considered the approximate equivalent PCM noise of a 7-bit PCM system."
References
"Source:" from Federal Standard 1037C and from MIL-STD-188.
Wikimedia Foundation.
2010.
Look at other dictionaries:
Pulse-code modulation — PCM redirects here. For other uses, see PCM (disambiguation). Pulse code modulation (PCM) is a method used to digitally represent sampled analog signals. It is the standard form for digital audio in computers and various Blu ray, Compact Disc and … Wikipedia
Pulse-width modulation — (PWM) of a signal or power source involves the modulation of its duty cycle, to either convey information over a communications channel or control the amount of power sent to a load. PrinciplePulse width modulation uses a square wave whose pulse… … Wikipedia
Noise figure — (NF) is a measure of degradation of the signal to noise ratio (SNR), caused by components in a radio frequency (RF) signal chain. The noise figure is defined as the ratio of the output noise power of a device to the portion thereof attributable… … Wikipedia
Noise shaping — is a technique typically used in digital audio, image, and video processing, usually in combination with dithering, as part of the process of quantization or bit depth reduction of a digital signal. Its purpose is to increase the apparent signal… … Wikipedia
Noise (audio) — Noise in audio, recording, and broadcast systems refers to the residual low level sound (usually hiss and hum) that is heard in quiet periods of a programme. In audio engineering, it can refer either to the acoustic noise from loudspeakers, or to … Wikipedia
Noise measurement — is carried out in various fields. In acoustics, it can be for the purpose of measuring environmental noise, or part of a test procedure using white noise, or some other specialised form of test signal. In electronics it relates to the sensitivity … Wikipedia
Noise (electronics) — Electronic noise [1] is a random fluctuation in an electrical signal, a characteristic of all electronic circuits. Noise generated by electronic devices varies greatly, as it can be produced by several different effects. Thermal noise is… … Wikipedia
Noise reduction — For sound proofing, see soundproofing. For scientific aspects of noise reduction of machinery and products, see noise control. Noise reduction is the process of removing noise from a signal. All recording devices, both analogue or digital, have… … Wikipedia
Noise temperature — In electronics, noise temperature is one way of expressing the level of available noise power introduced by a component or source. The power spectral density of the noise is expressed in terms of the temperature (in kelvins) that would produce… … Wikipedia
Noise (video) — For other uses, see Noise (disambiguation). On an empty channel, an analog TV receiver shows a snowy noise pattern. A similar pattern is shown if on a digital channel when not using a DTV converter box … Wikipedia
