Garstang and Knot-End Railway

Garstang and Knot-End Railway

The Garstang and Knot-End Railway ["sic"] was devised to provide an outlet for farmers in the Over Wyre area of the Fylde in Lancashire, England, to transport their produce up and down the country.

History

In December 1863, a prospectus was produced naming six directors of the Garstang and Knot-End Railway. These were: John Russell, Julian Augustus Tarner, Henry Gardner, Colonel James Bourne, Richard Bennett and James Overend. They were given a capital of £60,000 to build an 11½ mile long railway to Knott End ["sic"] from a junction with the Lancaster and Preston Junction Railway. The railway was authorised by Act of Parliament on 30 June 1864.Wells] Walmesley] [Suggitt, p.28]

The Garstang and Knot-End Railway Company took 5½ years to build a seven-mile single-track line from Garstang only as far as Pilling, across once desolate peat bogland that was being reclaimed for farming. The final cost was £150,000. The line opened to services on 5 December 1870, running with a single locomotive, "Hebe", although the official opening ceremony was not until 14 December 1870. Trains were mixed (passengers and goods), and goods wagons were uncoupled along the line to be collected on the return journey. Passengers could board at any point along the line by request. [Suggitt, pp.28–30]

In 1872, after well over a year of almost continuous use, the locomotive broke down. This caused a suspension of service, which in turn led to the company being in rent arrears. The locomotive was repossessed, and for the next three years only occasional horse-drawn trains were run. Goods services resumed on 23 February 1875 using a new engine, "Union". Passenger services followed on 17 April 1875. A replacement engine, "Farmer's Friend", was acquired in December of that year. It became known locally as the Pilling Pig on account of the squeal made by its whistle. Subsequently this name was given to all engines and was often used to refer to the railway itself. [Suggitt, pp.30–32]

In 1898, a separate Knott End Railway (KER) Company was incorporated, to extend the line from Pilling to Knott End. The 4½ mile extension was opened on 29 July 1908 and the KER took over the Garstang and Knot-End Railway. At the 1923 grouping, the KER was the smallest constituent of the London, Midland and Scottish Railway.Suggitt, p.32]

The new line of 1908 connected to a 1½ mile siding to salt mines near Preesall. This made a large contribution to the financial success of the railway. A dispute over haulage rates with the mine owners, the United Alkali Company, led to a brine pipeline being built under the River Wyre to United Alkali's Burn Naze plant. The loss of revenue was a severe blow to the railway. [Suggitt, pp.32–33] It closed to passengers on 29 Mar 1930.

The line continued to be used for goods. The Pilling to Knott End stretch was closed on 13 November 1950; almost all of the line closed on 31 July 1963, apart from the short section to stnlnk|Garstang Town which survived two more years until 16 August 1965.Suggitt, p.34]

One mile of the route near Knott End is now a footpath. Several crossing keepers' cottages along the line survive as private residences.

Locomotives

* 1870: Black, Hawthorn 0-4-2ST "Hebe"
* 1874: Manning Wardle 0-4-0ST "Union"
* 1875: Hudswell Clarke 0-6-0ST "Farmer's Friend" [Perkins (1908); p. 73] (alias "Pilling Pig")
* 1885: Hudswell Clarke 0-6-0ST "Hope"
* 1897: Hudswell Clarke 0-6-0ST "Jubilee Queen"
* 1900: Hudswell Clarke 0-6-0ST "New Century"
* 1908: Manning Wardle 0-6-0T "Knott End"
* 1909: Manning Wardle 2-6-0T "Blackpool"

Notes

References

* Bairstow, M. (2001) "Railways of Blackpool and the Fylde", Martin Bairstow Publ., ISBN 1-871944-23-6, p. 40–44
* Conolly, W.P. [1957] (1997) "Pre-Grouping Atlas and Gazeteer", 5th Ed., Ian Allen, ISBN 0-7110-0320-3, p. 24
* Kirkman, R and van Zeller, P. (1991) "Rails to the Lancashire Coast", Dalesman Books, ISBN 1-85568-027-0, p. 50–52
* Perkins, T.S. (1908) " [http://www.ukrailarchive.org/lancs/RM1908-22-072.pdf The Garstang & Knot-End Railway] ", "The Railway Magazine", 22, p. 72–77
* Suggitt, G. (2004) "Lost Railways of Lancashire", Newbury : [http://www.countrysidebooks.co.uk Countryside Books] , ISBN 1-85306-801-2
* Walmesley, F.S. (1959), " [http://www.ukrailarchive.org/lancs/rm1959-105-859.PDF The Garstang & Knot-End Railway] ", "The Railway Magazine", 105 (704: December), p. 859–864
* Wells, J. (1993) "The Pig and Whistle railway: a Lancashire backwater", "BackTrack", 7, pp.257–265, [http://www.steamindex.com/backtrak/bt7.htm summary] accessed online 4 September 2007

External links

* [http://www.pillingpig.co.uk The Pilling Pig Project] accessed 5 February 2007
* [http://www.igg.org.uk/gansg/00-app2/lms/gker.htm Goods & Not So Goods—Garsatang & Knott End Railway] accessed 7 September 2007


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Garstang and Catterall railway station — Infobox UK disused station| name = Garstang Catterall| manager = London and North Western Railway | locale = Catterall| borough = Wyre| platforms = 3 | caption = | line = Lancaster and Preston Junction Railway| latitude = 53.8890 | longitude =… …   Wikipedia

  • Lancaster and Preston Junction Railway — RDT Legende …   Deutsch Wikipedia

  • Garstang Town railway station — served the market town of Garstang in Lancashire, England.rail line previous=Nateby next=Garstang and Catterall route=Garstang and Knot End Railway col=964B00 ###@@@KEYEND@@@### …   Wikipedia

  • Nateby railway station — Location Place Nateby Area Wyre, Lancashire Coordinates …   Wikipedia

  • Cockerham Cross Halt railway station — Cockerham Cross was a halt at a level crossing on a road that crossed Cockerham Moss towards Cockerham in Lancashire, England. Preceding station Disused railways Following station Garstang Road   Garstang and Knot End Railway   Cogie… …   Wikipedia

  • Pilling railway station — served the village of Pilling in Lancashire, England.rail line previous=Carr Lane next=Cockerham Cross route=Garstang and Knot End Railway col=964B00 ###@@@KEYEND@@@### …   Wikipedia

  • Valve gear — The valve gear of a steam engine is the mechanism that operates the inlet and exhaust valves to admit steam into the cylinder and allow exhaust steam to escape, respectively, at the correct points in the cycle. It is sometimes referred to as the… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”