Honda NT650

Infobox Motorcycle
name = Honda NT650 GT


aka = Hawk GT / Bros / RC31 /NT650
manufacturer = Honda
production = 1988 - 1991
predecessor =
successor =
parent_company =
class = naked bike
platform =
engine = 647cc Four-stroke V-Twin
transmission = 5 speed manual
rake = 28.0º
trail = 4.7 in.
wheelbase = 56.3 in.
length =
width =
seat_height = 30.4 in.
dry_weight = 393 lb.
wet_weight = 412 lb.
fuel_economy = High/low/avg.: 66/47/52
fuel_capacity = 2.9 gal
related =
similar =

The Honda HawkGT NT650 was designed by Toshiaki Kishi and was the second Honda with Pro-Arm having the model designation RC31 coming immediately after the RC30. The Japanese version model was named the Honda Bros. The RC model designation is for bikes up to 750cc, though the Honda Pacific Coast (PC800) has an engine of more than 750 cc and a model designation of RC34.

The bike's main distinction is in its frame and swingarm. The dual spar aluminum frame and single sided swingarm (licensed from ELF) was very technologically advanced in 1988. The mildly tuned motor is descended from the VT500 and has been seen, in one guise or another, in several other models.

The bike was ahead of its time in many regards and as a result was not a strong seller despite the bike having grown to cult status. The Hawk GT was one of the first modern Naked bikes along with the Yamaha SRX, which were both released several years before the Ducati Monster and eventually the Suzuki SV650. Some sources claim that Triumph found much of the inspiration for the t509 Speed Triple/t595 Daytona from the Hawk GT and if one compares the two bikes side by side, the Triumph mimics many of the Hawks lines and shapes. There are also many visual similarities between the Hawk GT and the very popular 2003 (and up) Suzuki SV650 (standard version), further evidence as to the merits of the Hawk GT's advanced design concepts from 15 years prior.

During the initial production run, the cost difference between the Hawk GT and the CBR600 was less than 1000 dollars, resulting in very slow sales for the naked bike. However, by the mid-90's, left over models were being snatched up and current owners are passionate about their Hawks. Clean examples can fetch upwards of $3500 to $5000, more than the bike sold for new.

US model

The NT650, Hawk GT 647, RC31 was introduced in 1988 and produced through 1991. In 1988 the bike was sold in the colors Tempest Gray Metallic and Candy Flair Blue. For the remainder of the bikes production run it was only sold in red. There are only very minor changes between the 1988 model year and the 1989-91 model years. Trivia: Very early bikes did not have threads in the pin at the front of the gas tank (last known VIN: 0000117).

In 1989, the front suspension damper rods were changed to have only 2 (rather than 4 for the '88) holes. The front brake calipers were also changed to have screw-on covers over the mounting pins.

In 1991, the oil lines were run internally through the engine, rather than externally and only a handful of 1991 model year bikes actually made it into the United States, making the 1991 the rarest vintage Hawk in America.

Canadian model

Same bike as the US model but sold in different colours (except for the gray in '88).

1988: Black with a red seat, Tempest Gray Metallic with black seat.

1989: Dark Blue with a black seat and Deep Red with a black seat.

Europe model

A cousin to the Hawk GT, the Revere was available in Europe from 1988. The steel frame, shaft-drive, larger petrol tank, main stand, and longer rear end differentiate it from the Hawk GT. The NTV650 replaced the Revere in 1993. It was a revised version of the early model with no main stand, different carburetor, tube handlebar and longer exhaust. The engine power dropped in 3 steps from 60 HP to 50 HP. The NTV650 was replaced in 1997 by the Deauville, basically an NTV650 with full bodywork and hard saddlebags - not too different in general appearance from the PC800.

Japan model

The Bros came in two versions (400cc and 650cc) for the Japanese market, when Honda stopped selling the Hawk in 1992 they continued the Bros in Japan for one more year. A close ratio gear box (which drops into the Hawk) different wheels, and lower clip-ons were the major changes.

While never imported to the UK officially, the BROS is available in many European markets as a grey (unofficial) import.

Sales

Part of the dismal sales for the Hawk was the lack of clarity in its design: was it a standard with a high-tech frame or a sportbike with a low-tech motor and no bodywork? The Revere and its progeny had no such dichotomy as they dispensed with the high-tech frame and swingarm. The result is a workhorse standard that has become popular in the UK as a delivery bike.

Today

The Hawk GT is often described as a cult bike. Many owners modify their Hawks to accent the standard qualities it has as a light, sporty v-twin: torquey power delivery and easy cornering. With a top speed below 120 mph and a 0-60 mph time of about 4 seconds no one is going to fear the straight line performance of the Hawk. Find a favorite section of tight twisty road and the story changes.

Popular modifications include:

VFR 750 rear wheel,CBR 600 front wheel and twin disc brakes,

CBR 600 forks,Aftermarket exhausts,Aftermarket fairings.Turn signal shorteningClip-onsRear-setsBraided Brake Lines

External links

* [http://www.hawkgtforum.com Hawk GT Forum]
* [http://www.hawkgt.com The HawkGT Resource Center]
* [http://canyonchasers.net/bikes/hawk/index.php CanyonChasers Hawk GT Page]
* [http://v.webring.com/hub?ring=nt650 Honda Hawk NT650 Webring]
* [http://hondahawkgt.blogspot.com Riding a Hawk]
* [http://www.motorbikespecs.net/index.dyn?
]
* [http://www.motorbikespecs.net/index.dyn?
]
* [http://homepage.eircom.net/~hondabros/index.html Good Bros maintenance tips]
* [http://www.honda-bros.ru Russian Honda Bros Club]
* [http://www.arnold-talmon.com/images/hawkspecs.jpg1990 Stock Specs]