Xerox NoteTaker

The Xerox NoteTaker was perhaps the first portable computer. It was developed at Xerox PARC in Palo Alto, California, in 1976. Although it did not enter production, and only around ten prototypes were built, it strongly influenced the design of the later Osborne 1 and Compaq Portable computers.

The NoteTaker was developed by a team that included Adele Goldberg, Douglas Fairbairn, and Larry Tesler. It drew heavily on earlier research by Alan Kay, who had previously developed the Dynabook project. While the Dynabook was a concept for a transportable computer that was impossible to implement with available technology, the NoteTaker was intended to show what could be done.

The computer employed what was then highly advanced technology, including a built-in monochrome display monitor, a floppy disk drive and a mouse. It had 128 kB of RAM, then a very large amount, and used a 1 MHz CPU. It used a version of the Smalltalk operating system that was written for the Xerox Alto computer, which pioneered the graphical user interface.

The NoteTaker fitted into a case similar in form to that of a portable sewing machine; the keyboard folded out from the bottom to reveal the monitor and floppy drive. The form factor was later used on the highly successful "luggable" computers, including the Osborne 1 and Compaq Portable. However, these later models were about half as heavy as the NoteTaker, which weighed 22 kg (48 lb). Had the NoteTaker been produced commercially, it would likely have cost in excess of USD 50,000.Fact|date=August 2007

External links

* [http://www.computerhistory.org/VirtualVisibleStorage/artifact_main.php?tax_id=04.02.01.00#5 Xerox NoteTaker] from the Computer History Museum.
* [http://www.snarc.net/pda/pda-treatise.htm "The Evolution of the PDA"] , with an article on the NoteTaker.