# Finite element method in structural mechanics

Finite element method in structural mechanics

Finite element method (FEM) is a powerful technique originally developed for numerical solution of complex problems in structural mechanics, and it remains the method of choice for complex systems. In the FEM, the structural system is modeled by a set of appropriate finite elements interconnected at points called nodes. Elements may have physical properties such as thickness, coefficient of thermal expansion, density, Young's modulus, shear modulus and Poisson's ratio.

Element properties

* Straight or curved one-dimensional elements with physical properties such as axial, bending, and torsional stiffnesses. This type of elements is suitable for modeling cables, braces, trusses, beams, stiffeners, grids and frames. Straight elements usually have two nodes, one at each end, while curved elements will need at least three nodes including the end-nodes. The elements are positioned at the centroidal axis of the actual members.
* Two-dimensional elements for membrane action (plane stress, plane strain) and/or bending action (plates and shells). They may have a variety of shapes such as flat or curved triangles and quadrilaterals. Nodes are usually placed at the element corners and, if needed for higher accuracy, additional nodes can be placed along the element edges or even inside the element. The elements are positioned at the mid-surface of the actual layer thickness.
* Torus-shaped elements for axisymmetric problems such as thin, thick plates, shells, and solids. The cross-section of the elements are similar to the previously described types: one-dimensional for thin plates and shells, and two-dimensional for solids, and thick plates and shells.
* Three-dimensional elements for modeling 3-D solids such as machine components, dams, embankments or soil masses. Common element shapes include tetrahedrals and hexahedrals. Nodes are placed at the vertexes and possibly in the element faces or within the element.

Element interconnection and displacement

The elements are interconnected only at the exterior nodes, and altogether they should cover the entire domain as accurately as possible. Nodes will have nodal (vector) displacements or degrees of freedom which may include translations, rotations, and for special applications, higher order derivatives of displacements. When the nodes displace, they will "drag" the elements along in a certain manner dictated by the element formulation. In other words, displacements of any points in the element will be interpolated from the nodal displacements, and this is the main reason for the approximate nature of the solution.

Practical considerations

From the application point of view, it is important to model the system such that:
* Symmetry or anti-symmetry conditions are exploited in order to reduce the size of the domain.
* Displacement compatibility, including any required discontinuity, is ensured at the nodes, and preferably, along the element edges as well, particularly when adjacent elements are of different types, material or thickness. Compatibility of displacements of many nodes can usually be imposed via constraint relations--When such a feature is not available in the software package, a physical model that imposes the constraints may be used instead.
* Elements' behaviours capture the dominant actions of the actual system, both locally and globally.
* The element mesh is sufficiently fine in order to have acceptable accuracy. To assess accuracy, the mesh is refined until the important results shows little change. For higher accuracy, the aspect ratio of the elements should be as close to unity as possible, and smaller elements are used over the parts of higher stress gradient.
* Proper support constraints are imposed with special attention paid to nodes on symmetry axes.Large scale commercial software packages often provide facilities for generating the mesh, graphical display of input and output, which greatly facilitate the verification of both input data and interpretation of the results.

Theoretical overview of FEM-Displacement Formulation: From elements to system to solution

While the theory of FEM can be presented in different perspectives or emphases, its development for structural analysis follows the more traditional approach via the virtual work principle or the minimum total potential energy principle. The virtual work principle approach is more general as it is applicable to both linear and non-linear material behaviours.

The principle of virtual displacements for the structural system expresses the mathematical identity of external and internal virtual work::

The virtual internal work in the right-hand-side of the above equation may be found by summing the virtual work in the individual elements--This is the crucial step where we will need displacement functions written only for the small domain rather than over the entire system. As shown in the subsequent sections, Eq.(1) leads to the following governing equilibrium equation for the system:

:$mathbf\left\{R\right\} = mathbf\left\{Kr\right\} + mathbf\left\{R\right\}^o qquad qquad qquad mathrm\left\{\left(2\right)\right\}$where:$mathbf\left\{R\right\}$ = vector of nodal forces, representing external forces applied to the system's nodes.:$mathbf\left\{r\right\}$ = vector of system's nodal displacements, which will, by interpolation, yield displacements at any point of the finite element mesh.:$mathbf\left\{R\right\}^o$ = vector of equivalent nodal forces, representing all external effects other than the nodal forces which are already included in the preceding nodal force vector R. These external effects may include distributed or concentrated surface forces, body forces, thermal effects, initial stresses and strains.:$mathbf\left\{K\right\}$ = system stiffness matrix, which will be established by "assembling" the "elements' stiffness matrices" :$mathbf\left\{k\right\}^e$.

Once the supports' constraints are accounted for, the nodal displacements are found by solving the system of linear equations (2), symbolically::$mathbf\left\{r\right\} = mathbf\left\{K\right\}^\left\{-1\right\} \left(mathbf\left\{R\right\}-mathbf\left\{R\right\}^o \right) qquad qquad qquad mathrm\left\{\left(3\right)\right\}$

Subsequently, the strains and stresses in individual elements may be found as follows::$mathbf\left\{epsilon\right\} = mathbf\left\{Bq\right\} qquad qquad qquad qquad mathrm\left\{\left(4\right)\right\}$:$mathbf\left\{sigma\right\} = mathbf\left\{E\right\}\left(mathbf\left\{epsilon\right\} - mathbf\left\{epsilon\right\}^o\right)+mathbf\left\{sigma\right\}^o = mathbf\left\{E\right\}\left(mathbf\left\{Bq\right\} - mathbf\left\{epsilon\right\}^o\right)+mathbf\left\{sigma\right\}^oqquad qquad qquad mathrm\left\{\left(5\right)\right\}$where:$mathbf\left\{q\right\}$ = vector of element's nodal displacements--a subset of the system displacement vector r that pertains to the element under consideration.:$mathbf\left\{B\right\}$ = strain-displacement matrix that transforms nodal displacements q to strains at any point in the element.:$mathbf\left\{E\right\}$ = elasticity matrix that transforms effective strains to stresses at any point in the element.:$mathbf\left\{epsilon\right\}^o$ = vector of initial strains in the element.:$mathbf\left\{sigma\right\}^o$ = vector of initial stresses in the element.

By applying the virtual work equation (1) to the system, we can establish the element matrices $mathbf\left\{B\right\}$, $mathbf\left\{k\right\}^e$ as well as the technique of assembling the system matrices $mathbf\left\{R\right\}^o$ and $mathbf\left\{K\right\}$. Other matrices such as $mathbf\left\{epsilon\right\}^o$, $mathbf\left\{sigma\right\}^o$, $mathbf\left\{R\right\}$ and $mathbf\left\{E\right\}$ can be directly set up from data input.

Interpolation or shape functions

Let $mathbf\left\{q\right\}$ be the vector of nodal displacements of a typical element. The displacements at any point of the element may be found by interpolation functions as, symbolically::$mathbf\left\{u\right\} = mathbf\left\{N\right\} mathbf\left\{q\right\} qquad qquad qquad mathrm\left\{\left(6\right)\right\}$where:$mathbf\left\{u\right\}$ = vector of displacements at any point {x,y,z} of the element.:$mathbf\left\{N\right\}$ = matrix of "shape functions" serving as interpolation functions.

Equation (6) gives rise to other quantities of great interest:
* Virtual displacements consistent with virtual nodal displacements: $delta mathbf\left\{u\right\} = mathbf\left\{N\right\} delta mathbf\left\{q\right\} qquad qquad qquad mathrm\left\{\left(6b\right)\right\}$
* Strains in the elements:$mathbf\left\{epsilon\right\} = mathbf\left\{Du\right\} = mathbf\left\{DNq\right\} qquad qquad qquad qquad mathrm\left\{\left(7\right)\right\}$:where $mathbf\left\{D\right\}$ = matrix of differential operators that convert displacements to strains using linear elasticity theory. Eq.(7)shows that matrix B in (4) is::$mathbf\left\{B\right\} = mathbf\left\{DN\right\} qquad qquad qquad qquad mathrm\left\{\left(8\right)\right\}$
* Virtual strains consistent with element's virtual nodal displacements:

Internal virtual work in a typical element

For a typical element of volume $V^e$, the internal virtual work due to virtual displacements is obtained by substitution of (5) and (9) into (1):

:

Element matrices

Primarily for the convenience of reference, the following matrices pertaining to a typical elements may now be defined:

: Element stiffness matrix $mathbf\left\{k\right\}^e = int_\left\{V^e\right\} mathbf\left\{B\right\}^T mathbf\left\{E\right\} mathbf\left\{B\right\} , dV^e qquad mathrm\left\{\left(11\right)\right\}$

These matrices are usually evaluated numerically using Gaussian quadrature for numerical integration.Their use simplifies (10) to the following::

Element virtual work in terms of system nodal displacements

Since the nodal displacement vector q is a subset of the system nodal displacements r (for compatibility with adjacent elements), we can replace q with r by expanding the size of the element matrices with new columns and rows of zeros:

:where, for simplicity, we use the same symbols for the element matrices, which now have expanded size as well as suitably rearranged rows and columns.

ystem virtual work

Summing the internal virtual work (14) for all elements gives the right-hand-side of (1):

:

Considering now the left-hand-side of (1), the system external virtual work consists of:
* The work done by the nodal forces R: $delta mathbf\left\{r\right\}^T mathbf\left\{R\right\} qquad mathrm\left\{\left(16\right)\right\}$
* The work done by external forces $mathbf\left\{T\right\}^e$ on the part $mathbf\left\{S\right\}^e$ of the elements' edges or surfaces, and by the body forces $mathbf\left\{f\right\}^e$::$sum_\left\{e\right\} int_\left\{S^e\right\} delta mathbf\left\{u\right\}^T mathbf\left\{T\right\}^e , dS^e + sum_\left\{e\right\} int_\left\{V^e\right\} delta mathbf\left\{u\right\}^T mathbf\left\{f\right\}^e , dV^e$: Substitution of (6b) gives::: $delta mathbf\left\{q\right\}^T sum_\left\{e\right\} int_\left\{S^e\right\} mathbf\left\{N\right\}^T mathbf\left\{T\right\}^e , dS^e + delta mathbf\left\{q\right\}^T sum_\left\{e\right\} int_\left\{V^e\right\} mathbf\left\{N\right\}^T mathbf\left\{f\right\}^e , dV^e$

:or $-delta mathbf\left\{q\right\}^T sum_\left\{e\right\} \left(mathbf\left\{Q\right\}^\left\{te\right\} + mathbf\left\{Q\right\}^\left\{fe\right\}\right) qquad mathrm\left\{\left(17a\right)\right\}$:where we have introduced additional element's matrices defined below::: $mathbf\left\{Q\right\}^\left\{te\right\} = -int_\left\{S^e\right\} mathbf\left\{N\right\}^T mathbf\left\{T\right\}^e , dS^e qquad mathrm\left\{\left(18a\right)\right\}$:: $mathbf\left\{Q\right\}^\left\{fe\right\} = -int_\left\{V^e\right\} mathbf\left\{N\right\}^T mathbf\left\{f\right\}^e , dV^e qquad mathrm\left\{\left(18b\right)\right\}$:Again, numerical integration is convenient for their evaluation. A similar replacement of q in (17a) with r gives, after rearranging and expanding the vectors $mathbf\left\{Q\right\}^\left\{te\right\}, mathbf\left\{Q\right\}^\left\{fe\right\}$:::$-delta mathbf\left\{r\right\}^T sum_\left\{e\right\} \left(mathbf\left\{Q\right\}^\left\{te\right\} + mathbf\left\{Q\right\}^\left\{fe\right\}\right) qquad mathrm\left\{\left(17b\right)\right\}$

Assembly of system matrices

Adding (16), (17b) and equating the sum to (15) gives:

Since the virtual displacements $delta mathbf\left\{r\right\}$ are arbitrary, the preceding equality reduces to:

Comparison with (2) shows that:
* The system stiffness matrix is obtained by summing the elements' stiffness matrices::$mathbf\left\{K\right\} = sum_\left\{e\right\} mathbf\left\{k\right\}^e$
* The vector of equivalent nodal forces is obtained by summing the elements' load vectors::

In practice, the element matrices are neither expanded nor rearranged. Instead, the system stiffness matrix $mathbf\left\{K\right\}$ is assembled by adding individual coefficients $\left\{k\right\}_\left\{ij\right\}^e$ to $\left\{K\right\}_\left\{kl\right\}$ where the subscripts ij, kl mean that the element's nodal displacements $\left\{q\right\}_\left\{i\right\}^e, \left\{q\right\}_\left\{j\right\}^e$ match respectively with the system's nodal displacements $\left\{r\right\}_\left\{k\right\}, \left\{r\right\}_\left\{l\right\}$. Similarly, $mathbf\left\{R\right\}^o$ is assembled by adding individual coefficients $\left\{Q\right\}_\left\{i\right\}^e$ to $\left\{R\right\}^o_\left\{k\right\}$ where $\left\{q\right\}_\left\{i\right\}^e$ matches $\left\{r\right\}_\left\{k\right\}$. This direct addition of $\left\{k\right\}_\left\{ij\right\}^e$ into $\left\{K\right\}_\left\{kl\right\}$ gives the procedure the name "Direct Stiffness Method".

ee also

*Finite element method
*Flexibility method
*Matrix stiffness method
*Modal analysis using FEM
*List of finite element software packages
*Structural analysis
*Virtual work

Wikimedia Foundation. 2010.

### Look at other dictionaries:

• Finite element method — The finite element method (FEM) (sometimes referred to as finite element analysis) is a numerical technique for finding approximate solutions of partial differential equations (PDE) as well as of integral equations. The solution approach is based …   Wikipedia

• Engineering treatment of the finite element method — This is a draft of a new explanation as suggested on . The finite element method (FEM) is a technique for finding approximate solutions to differential equations that is particularly useful in engineering. As of 2005, FEM is the primary analysis… …   Wikipedia

• Structural mechanics — Space frame used in a building structure Pipe frame used in a competi …   Wikipedia

• Energy principles in structural mechanics — express the relationships between stresses, strains or deformations, displacements, material properties, and external effects in the form of energy or work done by internal and external forces. Since energy is a scalar quantity, these… …   Wikipedia

• Finite-Elemente-Methode — Die Finite Elemente Methode (FEM), auch „Methode der finiten Elemente“ genannt, ist ein numerisches Verfahren zur Lösung von partiellen Differentialgleichungen. Sie ist ein weit verbreitetes modernes Berechnungsverfahren im Ingenieurwesen und ist …   Deutsch Wikipedia

• Finite-Elemente-Analyse — Die Finite Elemente Methode (FEM) ist ein numerisches Verfahren zur näherungsweisen Lösung, insbesondere elliptischer partieller Differentialgleichungen mit Randbedingungen. Sie ist auch ein weit verbreitetes modernes Berechnungsverfahren im… …   Deutsch Wikipedia

• Finite-Elemente-Verfahren — Die Finite Elemente Methode (FEM) ist ein numerisches Verfahren zur näherungsweisen Lösung, insbesondere elliptischer partieller Differentialgleichungen mit Randbedingungen. Sie ist auch ein weit verbreitetes modernes Berechnungsverfahren im… …   Deutsch Wikipedia

• Finite Elemente — Die Finite Elemente Methode (FEM) ist ein numerisches Verfahren zur näherungsweisen Lösung, insbesondere elliptischer partieller Differentialgleichungen mit Randbedingungen. Sie ist auch ein weit verbreitetes modernes Berechnungsverfahren im… …   Deutsch Wikipedia

• Finite Elementemethode — Die Finite Elemente Methode (FEM) ist ein numerisches Verfahren zur näherungsweisen Lösung, insbesondere elliptischer partieller Differentialgleichungen mit Randbedingungen. Sie ist auch ein weit verbreitetes modernes Berechnungsverfahren im… …   Deutsch Wikipedia

• Structural analysis — comprises the set of physical laws and mathematics required to study and predict the behavior of structures. The subjects of structural analysis are engineering artifacts whose integrity is judged largely based upon their ability to withstand… …   Wikipedia