SCSI Read Commands

SCSI Read Commands

There are six different SCSI Read commands defined.

Read (6)

The Read(6) command is only 6 bytes long and is a legacy from early SCSI days. Its use is restricted to 21-bit LBAs (1 GiB). It's been present since the SASI (1979) specification. The CDB structure is:

Read (16)

The Read(16) command is similar to the Read(12) command except that it has a 64-bit LBA field. And is thus capable of addressing 8 388 608 PiB (ATA-6 is capable of max 128 PiB). The CDB structure is:

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • SCSI Write Commands — There are four different SCSI Write commands defined. Write(6) The Write(6) command is only 6 bytes long and is a legacy from early SCSI days. Its use is restricted to 21 bit LBAs. The CDB structure is: Write Long The Write Long command allows… …   Wikipedia

  • SCSI Read Capacity Command — The SCSI Read Capacity command is used to obtain data capacity information from a target device.The command descriptor block (CDB) structure is:The special control fields in the CDB have the following meaning:*RelAdr indicates that the logical… …   Wikipedia

  • SCSI — Small Computer System Interface, or SCSI (pronounced skuh zee [ [http://www.bartleby.com/61/56/S0175650.html SCSI] . American Heritage Dictionary .] [cite book|title=The Book of SCSI|last=Field|pages=1] ), is a set of standards for physically… …   Wikipedia

  • SCSI — Логотип SCSI (англ. Small Computer System Interface, произносится «скази»[1] …   Википедия

  • SCSI/ATA Translation — Mit SCSI/ATA Translation, kurz SAT, wird ein Standard zur Umsetzung von SCSI Kommandos in ATA Kommandos durch das SCSI/ATA Translation Layer, kurz SATL, bezeichnet. Der Standard ist besonders im Rahmen von Serial Attached SCSI (SAS) von Bedeutung …   Deutsch Wikipedia

  • SCSI log pages — SCSI target devices provide a number of SCSI log pages. These can be interrogated by a Log Sense command and in some cases can be set by a Log Select command. The Log Sense and Log Select commands include a 6 bit address field, allowing for 64… …   Wikipedia

  • SCSI mode pages — SCSI target devices provide a number of SCSI mode pages. These can be interrogated by a Mode Sense command and set by a Mode Select command. The Mode Sense and Mode Select commands include a 6 bit address field, allowing for 64 possible mode… …   Wikipedia

  • SCSI RDMA Protocol — The SRP (SCSI RDMA Protocol), also known as the SCSI Remote Protocol, allows for the RDMA transfer of SCSI commands and data across a low level network layer such as Infiniband verbs, bypassing system and network overhead, such as the TCP/IP… …   Wikipedia

  • SCSI initiator — In computer storage, a SCSI initiator is the endpoint that initiates a SCSI session, that is, sends a SCSI command. The initiator usually does not provide any logical unit numbers (LUNs).On the other hand, a SCSI target is the endpoint that does… …   Wikipedia

  • Commande SCSI — Dans l architecture SCSI chaque équipement connecté au bus peut envoyer un ordre à n importe quel autre. Le format de cet ordre ou commande est normalisé pour garantir l interopérabilité (ainsi un disque dur de n importe quel fabricant… …   Wikipédia en Français

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”