Liberty ship

Liberty ships were cargo ships built in the United States during World War II. They were British in conception but adapted by the U.S., cheap and quick to build, and came to symbolize U.S. wartime industrial output. Based on vessels ordered by Britain to replace ships torpedoed by German U-boats, they were purchased for the U.S. fleet and for lend-lease provision to Britain. Eighteen American shipyards built 2,751 Liberties between 1941 and 1945, easily the largest number of ships produced to a single design.

The production of these vessels mirrored, on a much larger scale, the manufacture of the "Hog Islander" ship and similar standardized types during World War I. The immense effort to build Liberty ships, the sheer number of ships built, and the fact that some of the ships survived far longer than the original design life of five years, make them the subject of much study.

History and service

In 1936, the American Merchant Marine Act was passed to subsidize the annual construction of 50 commercial merchant vessels to be used in wartime by the United States Navy as naval auxiliaries. The number was doubled in 1939 and again in 1940 to 200 ships a year. Ship types included a tanker and three types of merchant vessel, all to be powered by steam turbines. Limited industrial capacity, especially for turbine construction, meant that relatively few of these ships were built.

In 1940, the British government ordered 60 tramp steamships from American yards to replace war losses and boost the merchant fleet. These "Ocean" class ships were simple but fairly large (for the time) with a single coal-fired, 2,500 horsepower (1,864 kW) reciprocating engine of obsolete but reliable design. Britain specified coal plants because it had plenty of coal mines but no indigenous oil fields. The predecessor designs, including the "Northeast Coast, Open Shelter Deck Steamer", were based on a simple ship originally produced in Sunderland by J.L. Thompson & Sons (see Silver Line) from 1879, and widely manufactured up to the SS "Dorrington Court", which was built in 1938. The order specified an 18-inch (457 mm) increase in draught to boost displacement by 800 tons to 10,100 tons. The accommodation, bridge and main engine of these vessels were located amidships, with a long tunnel to connect the main engine shaft to its aft extension to the propeller. The first "Ocean"-class ship, "Ocean Vanguard", was launched on 16 August 1941.

The design was modified by the United States Maritime Commission to conform to American construction practices and to make it even quicker and cheaper to build. The U.S. version was designated 'EC2-S-C1': 'EC' for Emergency Cargo, '2' for a ship between 400 and convert|450|ft|m long (Load Waterline Length), 'S' for steam engines, and 'C1' for design C1. The new design replaced much riveting, which accounted for one-third of the labour costs, with welding, and featured oil-fired boilers. The order was given to a conglomerate of West Coast engineering and construction companies known as the Six Companies, headed by Henry J. Kaiser, and was also adopted as the Merchant Marine Act design.

On 27 March 1941, the number of lend-lease ships was increased to 200 by the Defense Aid Supplemental Appropriations Act, and increased again in April to 306, of which 117 would be Liberty ships.

The ships were constructed of sections that were welded together. This is similar to the technique used by Palmer's at Jarrow but substitutes welding for riveting. Riveted ships took several months to construct. The work force was newly trained—no one previously built welded ships. As America entered the war, the shipbuilding yards employed women to replace men who were enlisting in the armed forces. The ships initially had a poor public image because of their looks. In a speech announcing the emergency shipbuilding program, President Franklin D. Roosevelt had referred to the ship as "a dreadful looking object", and "Time" magazine called it an "Ugly Duckling". To try to assuage public opinion, 27 September 1941 was designated "Liberty Fleet Day", and the first 14 "Emergency" vessels were launched that day. The first of these was SS "Patrick Henry", launched by President Franklin D. Roosevelt. In remarks at the launch ceremony, FDR cited Patrick Henry's 1775 speech that finished "Give me liberty or give me death". Roosevelt said that this new class of ships would bring liberty to Europe, which gave rise to the name Liberty ship.

Early on, each ship took about 230 days to build ("Patrick Henry" took 244 days), but the average eventually dropped to 42 days. The record was set by "Robert E. Peary", which was launched 4 days and 15 1/2 hours after the keel was laid, although this publicity stunt was not repeated—and in fact much fitting-out and other work remained to be done after the "Peary" was launched. The ships were made assembly-line style, from prefabricated sections. In 1943, three new Liberty ships were being completed every day. They were mainly named after famous Americans, starting with the signatories of the Declaration of Independence.

Any group which raised war bonds worth $2 million could propose a name. Most were named for deceased people. The only living namesake was Francis J. O'Gara, the purser of the SS "Jean Nicolet", who was thought to have been killed in a submarine attack but in fact survived the war in a Japanese prisoner of war camp. Other exceptions to the naming rule were the SS "Stage Door Canteen", named for the USO club in New York, and the SS "U.S.O.", named after the organization itself. [ [http://www.cr.nps.gov/nr/twhp/wwwlps/lessons/116liberty_victory_ships/116facts1.htm Reading 1: Liberty Ships] "National Park Service Cultural Resources."]

Another notable Liberty ship was SS "Stephen Hopkins", which sank the German commerce raider "Stier" in a ship-to-ship gun battle in 1942 and became the first American ship to sink a German surface combatant.

SS "Richard Montgomery" is also notable, though in a less positive way; the wreck of the ship lies off the coast of Kent with 1,500 tons of explosives still on board, enough to match a small nuclear weapon should they ever go off.

The last Liberty ship constructed was the SS "Albert M. Boe", launched on 26 September 1945 and delivered on 30 October 1945. She was named after the chief engineer of a United States Army freighter who had stayed below decks to shut down his engines after a 13 April 1945 explosion, an act that won him a posthumous Merchant Marine Distinguished Service Medal. [http://www.history.navy.mil/danfs/a5/albert_m_boe.htm]

Problems

Early Liberty ships suffered hull and deck cracks, and a few were lost to such structural defects. During World War II, there were nearly 1,500 instances of significant brittle fractures. Twelve ships, including three of the 2,710 Liberties built, broke in half without warning, including the SS "John P. Gaines", [ [http://www.armed-guard.com/gaines.html Wreck of the SS John P Gaines] ] [ [http://www.mech.uwa.edu.au/DANotes/fracture/maritime/maritime.html Fracture - some maritime examples] . "Mechanical Engineering Department, University of Western Australia."] which sank on 24 November 1943 with the loss of 10 lives. Suspicion fell on the shipyards who had often used inexperienced workers and new welding techniques to produce large numbers of ships in great haste. Constance Tipper of Cambridge University demonstrated that the fractures were not initiated by welding, but instead by the grade of steel used which suffered from embrittlement. [ [http://www-g.eng.cam.ac.uk/125/1925-1950/tipper.html Constance Tipper (researcher into Liberty ship fracture)] ] She discovered that the ships in the North Atlantic were exposed to temperatures that could fall below a critical point when the mechanism of failure changed from ductile to brittle, and thus the hull could fracture relatively easily. The predominantly welded (as opposed to riveted) hull construction then allowed cracks to run for large distances unimpeded. One common type of crack nucleated at the square corner of a hatch which coincided with a welded seam, both the corner and the weld acting as stress concentrators. Furthermore, the ships were frequently grossly overloaded and some of the problems occurred during or after severe storms at sea that would have placed any ship at risk. Various reinforcements were applied to the Liberty ships to arrest the crack problems, and the successor design, the Victory ship, was stronger and less stiff to better deal with fatigue.

Several designs of mass-produced petroleum tankers were also produced, the most numerous being the T2 tanker series, with about 490 built between 1942 and the end of 1945.

After the war

Several Liberty ships were converted by the US Army into floating repair depots starting in June 1945 which included addition of special landing platforms to accommodate R-4 helicopters, creating the first sea-going helicopter-equipped ships. [ [http://cbi-theater-3.home.comcast.net/~cbi-theater-3/hoverfly/hoverfly.html The Hoverfly in CBI, Carl Warren Weidenburner] ]

Many Liberty ships survived the war, and made up a large percentage of the postwar cargo fleet. Many were bought by Greek shipowners at very low prices. Shipping magnates like Taki Theodoracopoulos were known to have started their fleets by buying many Liberties. The term "Liberty-size cargo" for 10,000 tons may still be heard in the shipping business.

In the 1960s three Liberty ships were reactivated and converted to technical research ships (they were actually used to gather electronic intelligence and for radar picket duties) by the United States Navy with the hull type AGTR. SS "Samuel R. Ailken" became the USS "Oxford" (AGTR-1), SS "Robert W. Hart" became the USS "Georgetown" (AGTR-2), and SS "J. Howland Gardner" became the USS "Jamestown" (AGTR-3). All of these ships were decommissioned and stricken from the Naval Register in 1969 and 1970.

Only two operational Liberty ships survive: the SS "John W. Brown" (following a long career as a school ship and many internal modifications) and the "Jeremiah O'Brien", largely in original condition. Both museum ships, they still put out to sea regularly. In 1994, the "O'Brien" steamed from San Francisco to England and France, the only large ship that participated in the World War II D-Day invasion to return for the 50th anniversary.

Liberty ships continue to serve in a "less than whole" function many decades after their launching. In Portland, Oregon the hulls of the "Richard Henry Dana" and "Jane Adams" serve as the basis of floating docks. [ [http://www.portofportland.com/PortDispatch/PortDispatch.aspx?contentFile=Issue_2008_02/Content/page6.ascx Did You Know: Liberty Ships Still Afloat in Portland] ] The SS "Albert M. Boe" survives as "Star of Kodiak", a floating cannery, docked in Kodiak Harbor at coord|57|47|12|N|152|24|18|W|type:landmark_scale:2000.

U.S. shipyards

Liberty ships were built at seventeen shipyards located along the Atlantic, Pacific and Gulf coasts: [cite web | url = http://www.coltoncompany.com/shipbldg/ussbldrs/wwii/merchantsbldg.htm | title = WWII Construction Records, Private-Sector Shipyards that Built Ships for the U.S. Maritime Commission | date = | publisher = Colton Company | accessdate = 2007-12-01 ]

*Alabama Drydock and Shipbuilding, Mobile, Alabama
*Bethlehem-Fairfield Shipyard, Baltimore, Maryland
*California Shipbuilding Corp., Los Angeles, California
*Delta Shipbuilding Corp., New Orleans, Louisiana
*J. A. Jones Construction Company
**Panama City, Florida
**Brunswick, Georgia
*Kaiser Company, Vancouver, Washington
*Marinship, Sausalito, California
*New England Shipbuilding Corporation, South Portland, Maine, East and West Yards (both on the same 60 acres of shipyard)
*North Carolina Shipbuilding Company, Wilmington, North Carolina
*Oregon Shipbuilding Corporation, Portland, Oregon
*Permanente Metals Corporation, Richmond, California (a Kaiser facility)
**Yard No. 1
**Yard No. 2
*St. Johns River Shipbuilding, Jacksonville, Florida
*Southeastern Shipbuilding, Savannah, Georgia
*Todd Houston Shipbuilding, Houston, Texas
*Walsh-Kaiser Co., Inc., Providence, Rhode Island

Fictional appearances

A Liberty ship was featured in the "Quantum Leap" episode 'Ghost Ship'.

A Liberty ship, converted to a hospital ship, is the eponymous subject and setting of Alistair MacLean's mystery thriller "San Andreas" (1984) The prologue to this novel, also by MacLean, is an interesting essay on Liberty ships and the conditions, character and behavior of the British Merchant Marine owners that used them, and sailors that sailed them.

A Liberty ship is featured in the Humphrey Bogart 1943 film "Action in the North Atlantic". Its deck gun is described as being 5" rather than 4", probably for wartime propaganda reasons.

In Clive Cussler's book "Deep Six", the prologue details a Liberty ship that disappears in the 1960s and becomes a recurring ghost ship in "The Flying Dutchman" vein. It is later found by Dirk Pitt, leading to further adventures.

Most of the engine room scenes of the 1997 film "Titanic" were shot aboard the museum Liberty Ship SS|Jeremiah O'Brien in San Francisco Bay.

The wreck of the SS "Richard Montgomery" is central to the plot of Stephen Barlay's 1977 novel "Blockbuster", in which an extortionist threatens to blow it up, thereby causing serious flooding in central London, if his demands are not met.

ee also

* List of Liberty ships
* List of Liberty ships by hull number
* Type C1 ship
* Type C2 ship

Notes

References

*cite web |url=http://ww2ships.com/acrobat/us-os-001-f-r00.pdf |title=Liberty Cargo Ship |accessdate=2008-03-25 |first=James |last=Davies |date=2004 |work= |page=23|publisher=ww2ships.com
*
*

External links

* [http://www.usmm.org/libertyships.html Liberty Ships built by the United States Maritime Commission in World War II]
* [http://www.fiu.edu/%7Ethompsop/liberty/liberty1.html Links to Liberty Ship information]
* [http://www.cr.nps.gov/nr/twhp/wwwlps/lessons/116liberty_victory_ships/116liberty_victory_ships.htm Liberty Ships and Victory Ships, America's Lifeline in War] A lesson on Liberty ships and Victory ships from the National Park Service's Teaching with Historic Places.
* [http://dlg.galileo.usg.edu/liberty_ships/?link=vsbg&Welcome Ships for Victory: J.A. Jones Construction Company and Liberty Ships in Brunswick, Georgia] Eighty-four black-and-white photographs from the J.A. Jones Construction Company collection at the Brunswick-Glynn County Library that depict the company’s World War II cargo ship building activities in its Brunswick, Georgia shipyard from 1943 to 1945.
* [http://www.liberty-ship.com/html/yards/introduction.html#top Project Liberty Ship - The Shipyards]
* [http://www.us-maritime-commission.de/ Shipbuilding under the United States Maritime Commission, 1936 to 1950]