- SILLIAC
The SILLIAC ("Sydney version of the Illinois Automatic Computer", i.e. the "Sydney ILLIAC"), an early
computer built by theUniversity of Sydney ,Australia , was based on the ILLIAC andORDVAC computers developed at the University of Illinois, which in turn were based on the IAS architecture developed byJohn von Neumann .SILLIAC [Deane, J: "SILLIAC - Vacuum Tube Supercomputer", Science Foundation for Physics, 2006, ISBN 1-86487-844-4] had its genesis in late
1953 whenHarry Messel , the dynamic new head of the School of Physics, andJohn Blatt , newly arrived researcher, both independently realised that the School needed an electronic computer as a tool fortheoretical physics . Whilst the first computer in the southern hemisphere, theCSIR Mk 1 , was already running elsewhere on the University of Sydney grounds, there were several serious impediments to its use by the School of Physics: The CSIR Mk 1 was fully occupied withCSIR research and John Blatt found its staff very unhelpful; and, as aserial architecture computer, it was far too slow for the sort of problems that Blatt and Messel envisaged. The solution was for the School to build its own computer.A suitable computer (ILLIAC) already existed at the University of Illinois and Blatt and Messel chose to copy it, rather than design a computer from scratch. The University of Illinois were happy to provide plans and assistance and estimated the cost of building a copy at US$110,000.
John Algie , then maintenance engineer for CSIRAC, reviewed the costings and estimated the cost at AU£35,200 (roughly AU$2,000,000 in 2006 dollars). Based on this, a decision to proceed was made at the end of 1953. A mutual friend introduced Messel toAdolph Basser , who donated AU£50,000 towards the computer.Like most of the IAS family, SILLIAC was not an exact copy of ILLIAC. One important change was the use of 2C51 [ [http://www.nj7p.org/Tube4.php?tube=2C51 2C51 Medium-Mu Twin Triode] , 9 pins, 2.2W heater] valves in place of the more common 6J6 [ [http://www.nj7p.org/Tube4.php?tube=6J6 6J6 Medium-Mu Twin Triode] , 7 pins, 2.8W heater] . The 2C51 had been developed by
Bell Labs for use in undersea telephone repeaters and had about 5 times the life (for 6 times the cost). This decision significantly improved the reliability of SILLIAC compared to its contemporaries.Like other early computers, SILLIAC was physically large. The computer itself was a single large cabinet 2.5m high, 3m wide and 0.6m deep in one room. Its power supply occupied a second room and
air-conditioning required an additional room in the basement.In July
1954 , Standard Telephones and Cables (STC) was contracted to build the computer, with testing and installation performed by technicians within the School of Physics.On
July 4 ,1956 , SILLIAC successfully passed its self test and a test run of a scientific program. On the following day, it ran its first "production" program and users were provided with regular access fromJuly 9 . The official opening was onSeptember 12 .Barry de Ferranti , a pioneer involved in the construction of SILLIAC described the main cabinet of the computer as about 2 metres high, 1 metre deep and 5 metres long with glass panels at the front and light switches that indicated what was going on inside. It ran untilMay 17 ,1968 when it was replaced by a faster and bigger machine. SILLIAC has now been broken up into pieces.Conservation
Some pieces of SILLIAC are at the
Powerhouse Museum and others are displayed at Sydney University [ [http://www.theage.com.au/news/technology/the-computer-that-launched-a-revolution/2006/09/11/1157826868138.html The Age - Computer that launched a revolution] - Louisa Hearn - 12 September 2006] .In March 2008, the Australian Computer Museum Society was seeking alternate storage, or risk its collection including important components of SILLIAC being scrapped [ [http://www.abc.net.au/news/stories/2008/03/14/2189966.htm Heritage computers facing scrap heap] ,
ABC Online , 14 March 2008, accessed 15 March 2008] .Hardware Specifications
*Parallel, asynchronous operation. Approximately 13,000 adds, 1400 multiplies or 1200 divides per second
*Memory: 1024 words of 40bit s using 40Williams tubes
*Two 20-bit instructions per word.
*Approximately 150 operations on 2 registers
*Paper tape input, paper tape or printer output. Four magnetic tape units added in 1958
*Initially 2768 valves. Increased to 2911 during 1958 upgrade
*Power consumption: 35kW
*Average of 11 hours between failuresExternal links
* [http://www.abc.net.au/rn/scienceshow/stories/2007/1810643.htm#transcript The Science Show about SILLIAC]
* [http://members.iinet.net.au/~dgreen/silliac.html David Green's SILLIAC page] - Programming Manuals and an emulator
* [http://www.powerhousemuseum.com/collection/database/index.php?irn=151086 Description and Image of a Component] in the collection of thePowerhouse Museum References
Wikimedia Foundation. 2010.