Open channel flow

Open-Channel Flow, a branch of Hydraulics, is a type of liquid flow within a conduit with a free surface, known as a channel. The other type of flow within a conduit is pipe flow. These two types of flow are similar in many ways, but differ in one important respect; the free surface. Open-channel flow has a free surface, whereas pipe flow does not.

Classifications of Flow

Open-channel flow can be classified and described in various ways based on the change in flow depth with respect to time and space. The fundamental type of flow dealt with in open-channel hydraulics.

Time as the Criterion

Steady Flow – The depth of flow does not change over time, or if it can be assumed to be constant during the time interval under consideration.

Unsteady Flow - The depth of flow does change with time.

Space as the Criterion

Uniform Flow – The depth of flow is the same at every section of the channel. Uniform flow can be steady or unsteady, depending on whether or not the depth changes with time, (although unsteady uniform flow is rare).

Varied Flow - The depth of flow changes along the length of the channel. Varied flow technically may be either steady or unsteady (although unsteady varied flow is a practically impossible condition).

Varied flow can be further classified as either rapidly or gradually varied.

Rapidly varied flow - The depth changes abruptly over a comparatively short distance. Rapidly varied flow is known as local phenomenon. Examples are the hydraulic jump and the hydraulic drop.

Gradually varied flow – The depth changes over a long distance.

Continuous flow - The discharge is constant throughout the reach of the channel under consideration. This is often the case with steady flow. This flow is considered continuous and therefore can be described using the continuity equation for continuous steady flow.

Spatially varied or discontinuous flow - The discharge of a steady flow is nonuniform along a channel. This happens when water enters and/or leaves the channel along the course of flow. An example of flow entering a channel would be a road side gutter. An example of flow leaving a channel would be an irrigation channel. This flow can be described using the continuity equation for continuous unsteady flow requires the consideration of the time effect and includes a time element as a variable.

Summary of the Classification of Open-Channel Flow

Steady Flow

Uniform Flow

Varied Flow

Gradually Varied flow

Rapidly varied flow

Unsteady flow

Unsteady Uniform Flow (rare)

Unsteady Flow (“unsteady varied flow” should be here, but it is a practically impossible condition, so it is known simply as unsteady flow)

Gradually Varied Unsteady flow

Rapidly varied Unsteady flow

States of Flow

The behavior of open channel flow is governed by the effects of viscosity and gravity relative to the inertial forces of the flow. Surface tension has a minor contribution, but does not play a significant enough role in most circumstances to be a governing factor. Depending on the effect of viscosity relative to inertia, as represented by the Reynolds number, the flow can be either laminar, turbulent, or transitional.

See Also

Fields of study

Hydraulics

Hydrology

Fluid Dynamics

Types of fluid flow

Pipe flow

Laminar flow

Turbulent flow

Transitional flow

Fluid properties

viscosity

Reynolds number

Other Related Articles

hydraulic jump

Manning Formula

References

Chow, V. T. (2008). Open-channel hydraulics. Caldwell, New Jersey: Blackburn Press.