Rumford Branch

Rumford Branch

The Maine Central Railroad Rumford Branch is a railroad line in Maine now operated as part of the Pan Am Railways system. The Rumford Branch leaves the mainline at Leeds Junction and continues northwest up the Androscoggin River valley, passing through Livermore Falls and terminating at Rumford. The branch comprises the remaining trackage of three earlier branches:

  • The first 20.1 miles are the former Farmington Branch from Crowley's Junction on the Lewiston Branch through Leeds Junction and Livermore Falls to Wilton and Farmington.
  • The last 16.1 miles are the former Rangeley Branch from Rumford Junction on the Maine Central Back Road through Canton and Rumford to Kennebago north of Rangeley Lake.[1]

The Rangeley branch north of Rumford was abandoned and dismantled following damage in the 1936 flood. The southern end of the Farmington branch from Leeds Junction to Crowley Junction on the Lewiston lower branch was dismantled in 1938. The southern end of the Rangeley branch from Rumford Junction to Canton was dismantled in 1952. The last passenger train to Farmington was in 1957.[2]

Contents

Route mileposts

  • Milepost 0: Leeds Junction on the Maine Central Back Road
  • Milepost 7.3: Leeds Center
  • Milepost 20.1: Livermore Falls former junction with the Farmington Branch north to the narrow-gauge Sandy River and Rangeley Lakes Railroad interchange at Farmington
  • Milepost 24.8: Riley's large paper mill originating or terminating 17,000 annual carloads in 1973.[3]
  • Milepost 31.1: Canton former junction with the Rangeley Branch south through Mechanic Falls to Rumford Junction on the Maine Central Back Road near Auburn.
  • Milepost 47.2: Rumford large paper mill originating or terminating 11,000 annual carloads in 1973.[3]

History

The Androscoggin Railroad was chartered in 1848 to build a Portland gauge railroad to Farmington, Maine from Leeds Junction on the Portland gauge Androscoggin and Kennebec Railroad. The railway was completed to Livermore Falls in 1852, and to Farmington in 1859. The railway was then extended south from Leeds Junction to Brunswick to connect with the standard gauge Kennebec and Portland Railroad in 1861. Conversion of the Androscoggin Railroad to standard gauge that year initiated a series of court battles ultimately eliminating Maine's Portland gauge rail network. Maine Central leased the Androscoggin Railroad in 1871, and converted its own line to standard gauge in 1873. The southern end of the Androscoggin Railroad adjacent to the Androscoggin River from Brunswick to Crowley Junction became the Lewiston branch of the Maine Central, while the remainder of the line to Farmington became the Farmington branch.[2]

Farmington Branch

Lewiston Branch

The Buckfield Branch Railroad was chartered in 1847 to build a Portland gauge railroad to Buckfield from Mechanic Falls on the Grand Trunk Railway. The railway was completed to Buckfield in 1849 and reorganized as the Portland and Oxford Central Railroad in 1857. The railway was extended to Canton in 1870 and reorganized as the Rumford Falls and Buckfield Railroad in 1874. The railway went into receivership in 1878 and was converted to standard gauge. The railway was reorganized by Hugh J. Chisholm in 1890 as the Portland and Rumford Falls Railway. The Portland and Rumford Falls Railway was extended north to Rumford Falls in 1892 and south to connect with the Maine Central Railroad at Rumford Junction near Auburn in 1893. A branch line was completed from Canton to Chisholm in 1897 and extended to a connection with the former Androscoggin Railroad at Livermore Falls in 1899. The Portland and Rumford Falls Railway chartered a subsidiary Rumford Falls and Rangeley Lakes Railroad in 1894 to access aboriginal forests north of Rumford. The Rumford Falls and Rangeley lakes reached Oquossoc in 1902. Maine Central leased the entire line from Rumford Junction to Oquossoc in 1907, and extended it to Kennebago. This line became known as the Rangeley branch when formally merged into the Maine Central in 1914. The branch from Canton to Livermore Falls was designated the Livermore Falls branch.[2]

Rangeley Branch

  • Milepost 0: Rumford Junction on the Maine Central Back Road
  • Milepost 4.1: Elmwood
  • Milepost 5.9: Riccars
  • Milepost 8: Poland
  • Milepost 11.6: Mechanic Falls interchange with the Grand Trunk Railway
  • Milepost 16.1: West Minot
  • Milepost 20.2: East Hebron
  • Milepost 24.8: Buckfield
  • Milepost 29.5: East Sumner
  • Milepost 31.5: Hartford
  • Milepost 36.6: Canton
  • Milepost 37.3: junction with the Maine Central Livermore Falls Branch
  • Milepost 38.3: Gilbertville
  • Milepost 43: East Peru
  • Milepost 44.8: Peru
  • Milepost 48.2: Dixfield
  • Milepost 52.7: Rumford
  • Milepost 58.5: Frye
  • Milepost 62.2: Roxbury
  • Milepost 66.6: Byron
  • Milepost 70.5: Houghton
  • Milepost 79.3: Bemis
  • Milepost 86.1: South Rangeley
  • Milepost 88.6: Oquossoc
  • Milepost 99.4: Kennebago[1]

Livermore Falls Branch

References

  1. ^ a b c d e Maine Central Railroad (1917). Hand-Book of Officers, Agents, Stations and Sidings. Edwin B. Robertson. pp. 9–11. 
  2. ^ a b c Johnson, Ron (1985). The Best of Maine Railroads. Portland Litho. pp. 25–26,41, 53, 55,76–77&111–112. 
  3. ^ a b United States Department of Transportation (1974). Rail Service in the Midwest and Northeast Region. United States Government Printing Office. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Maine Central Railroad Rumford Branch — The Rumford Branch is a railroad line in Maine that was operated by the Maine Central Railroad. It is now part of the Pan Am Railways system.The Rumford Branch junctions with the mainline at Leeds Junction and continues northwest up the… …   Wikipedia

  • Rumford Falls and Buckfield Railroad — Die Portland and Rumford Falls Railway ist eine ehemalige Eisenbahngesellschaft in Maine (Vereinigte Staaten). Sie wurde am 22. Juni 1847 als „Buckfield Branch Railroad“ gegründet. Ziel der Gesellschaft war es, die Kleinstadt Buckfield an das… …   Deutsch Wikipedia

  • Bahnstrecke Rumford Junction–Kennebago — Rumford Junction ME–Kennebago ME, Stand 1999[1] Streckenlänge: 161,9 km Spurweite: 1435 mm (Normalspur) Gesellschaft: PAR Legende …   Deutsch Wikipedia

  • Buckfield Branch Railroad — Die Portland and Rumford Falls Railway ist eine ehemalige Eisenbahngesellschaft in Maine (Vereinigte Staaten). Sie wurde am 22. Juni 1847 als „Buckfield Branch Railroad“ gegründet. Ziel der Gesellschaft war es, die Kleinstadt Buckfield an das… …   Deutsch Wikipedia

  • Portland and Rumford Falls Railway — Die Portland and Rumford Falls Railway ist eine ehemalige Eisenbahngesellschaft in Maine (Vereinigte Staaten). Sie wurde am 22. Juni 1847 als „Buckfield Branch Railroad“ gegründet. Ziel der Gesellschaft war es, die Kleinstadt Buckfield an das… …   Deutsch Wikipedia

  • Lewiston and Auburn Branch Railroad — Lewiston Jct. ME–Lewiston ME, Stand 1999[1] Legende …   Deutsch Wikipedia

  • Maine Central Railroad Company — Maine Central Railroad Co. MEC system map, circa 1923 Reporting mark MEC …   Wikipedia

  • Maine Central Railroad — Infobox SG rail railroad name=Maine Central Railroad logo filename=Maine central pine tree route herald.jpg logo size=250 locale=central Maine with lines to New Brunswick, New Hampshire, Vermont and Quebec start year=1862 end year=1981 (subsumed… …   Wikipedia

  • Maine Central — Le chemin de fer du Maine Central (sigle AAR: MEC) était un chemin de fer américain de classe I du sud du Maine. Il fut créé en 1856 et débuta ses opérations en 1862. Il exploitait une ligne principale entre South Portland, Maine et la frontière… …   Wikipédia en Français

  • Byron Logging Railroad — Rumford Junction ME–Kennebago ME, Stand 1999[1] Gesellschaft: PAR Streckenlänge: 161,9 km Spurweite: 1435 mm (Normalspur) Gleise: 1 Legende …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”