Donald R. Lobaugh Bridge

Donald R. Lobaugh Bridge
Donald R. Lobaugh Bridge

View from Harrison Hills overlook.
Other name(s) Freeport Bridge
Carries 4 lanes of PA-356.svg PA 356
Crosses Allegheny River
Locale Buffalo Township and Allegheny Township
Maintained by PennDOT District 12-0
Design cantilever bridge
Material steel
Longest span 426.0 feet (129.8 m)
Piers in water 2
Clearance below 47.0 feet (14.3 m)
Opened 1965
Coordinates 40°40′07″N 79°41′32″W / 40.6686°N 79.6921°W / 40.6686; -79.6921Coordinates: 40°40′07″N 79°41′32″W / 40.6686°N 79.6921°W / 40.6686; -79.6921

The Donald R. Lobaugh Bridge (commonly known as the Freeport Bridge) is a cantilever bridge that carries vehicular traffic across the Allegheny River between both Buffalo and Allegheny townships in Pennsylvania.

History

Built in 1965,[1] the bridge marks the boundary between suburban Pittsburgh and the more rural Upper Allegheny. The structure replaced the 1889 Garvers Ferry Bridge, which was extremely deteriorated by the 1950s and that was nearly destroyed in a 1959 barge collision. The bridge's namesake is Donald R. Lobaugh, a Medal of Honor recipient from World War II.

The bridge was listed as having a poor deck and substructure and having serious deterioration of its superstructure before having $5 million of emergency steel repairs in 2006/2007. Before the repairs the weight limit was 3 tons; this was increased to the legal load of 40 tons after the repairs.[2]

The bridge is maintained by Pennsylvania Department of Transport 12-0 and is due to be rehabilitated in 2010.[3]

See also

References



Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Donald R. Lobaugh — Born February 7, 1925(1925 02 07) Freeport, Pennsylvania Died July 22, 1944(1944 07 22) (aged 19) near Afua, New Guinea …   Wikipedia

  • Pennsylvania Route 356 — PA Route 356 Route information Maintained by PennDOT Length: 32.5 mi[1] …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”