- Saxon V K
-
Saxon V K
DRG Class 99.61
Number(s): 201-209
99 611-619Quantity: 9 Manufacturer: Sächsische Maschinenfabrik, Chemnitz Year(s) of manufacture: 1901-1907 Retired: 1934/1942 Wheel arrangement: 0-8-0 Axle arrangement: D n2vt Type: K 44.7 Gauge: 750 mm Length over couplers: 8.950 mm Height: 3.080 mm Width: 2.170 mm Overall wheelbase: 3.900 mm Minimum curve: 40 m Empty weight: 22.8 t Service weight: 28.8 t Top speed: 30 km/h Starting tractive effort: 43.64 kN Driving wheel diameter: 855 mm Valve gear: Walschaerts (Heusinger) No. of cylinders: 2 LP cylinder bore: 340 mm HP cylinder bore: 530 mm Piston stroke: 430 mm Boiler Overpressure: 14 bar Grate area: 0.97 m² Radiative heating area: 4.22 m² Evaporative heating area: 59.67 m² Water capacity: 2.4 m³ Fuel: 0.96 t coal The Saxon Class V K were German, eight-coupled, narrow gauge steam locomotives operated by the Royal Saxon State Railways which had been primarily intended for the Müglitztalbahn. In 1925 the Deutsche Reichsbahn incorporated arranged these locomotives as DRG Class 99.61.
Contents
History
For the hilly line of the Müglitztalbahn from Mügeln to Geising-Altenberg the Sächsische Maschinenfabrik in Chemnitz developed an eight-coupled locomotive which, it was envisaged, would handle this route better that the hitherto deployed Saxon Classes I K and IV K. In 1901 and from 1905 to 1907 a total of nine locomotives were placed in service. Those built in 1905 had a slightly larger driver's cab.
Whilst the new type of drive using Klien-Lindner axles allowed the eight-coupled engines to negotiate tight curves, in the end the new Class V K proved just as complicated and maintenance-intensive as the tried and tested IV K.
For that reason no more were procured, despite their better starting characteristics.
All nine engines, numbered 201 to 209 were taken over in 1920 by the Deutsche Reichsbahn and in 1925 were renumbered to 99 611 to 99 619.
Betwee 1934 and 1942 the locomotives were all retired. It is possible that several locomotives were left on the battlefields of the Second World War following duties at the front.
Technical features
The boiler had the same dimensions as the Saxon IV K. The boiler feed was provided by two Friedmann injectors. The steam engine itself was a two-cylinder compound which drove the second coupled axle. The low-pressure cylinder on the right was set at an angle due to its large size. The first and fourth coupled axles were Klien-Lindner hollow axles which enabled an outside frame with Hall cranks. Two pull rods arranged in a cross enabled the transverse movement of the two hollow axles to be set by the same amount.
For braking the locomotives were originall equipped with a steam brake and counterweight brake. In addition the locomotives were fitted for Heberlein brakes. But by 1920 they were given the new Körting vacuum brakes for engine and train.
The water supplies were carried in side tanks; the coal was stored in a bunker behind the cab.
Duties
The six locomotives went into service on the Müglitztalbahn. Even after the appearance of the more powerful VI K they remained on this route. After the conversion of the Müglitztalbahn to standard gauge in the 1930s the locomotives were transferred to other lines. They are still used on the Mügeln and Thum railway networks and the Taubenheim–Dürrhennersdorf narrow gauge railway.
Literature
- Wolfgang Wagner, Reiner Scheffler: II K (alt), III K und V K. Egglham 1996. ISBN 3-922138-60-8
- Fritz Näbrich, Günter Meyer, Reiner Preuß: Lokomotiv-Archiv Sachsen 2, transpress VEB Verlag für Verkehrswesen, Berlin 1984.
- Spielhoff, Lothar, Länderbahn-Dampf-Lokomotiven. Band 1: Preußen, Mecklenburg, Oldenburg, Sachsen und Elsaß-Lothringen, Franckh'sche Verlagshandlung, Stuttgart, 1990, ISBN 3-440-06145-0
See also
External links
- There is a relevant English-language forum at Railways of Germany
Categories:- 0-8-0T locomotives
- Locomotives of Saxony
- 750 mm gauge locomotives
Wikimedia Foundation. 2010.
