Coordinate conditions

Coordinate conditions

In general relativity, the laws of physics can be expressed in a generally covariant form. In other words, the real world does not care about our coordinate systems. However, it is often useful to fix upon a particular coordinate system, in order to solve actual problems or make actual predictions. A coordinate condition selects such coordinate system(s).

Contents

Indeterminacy in general relativity

The Einstein field equations do not determine the metric uniquely, even if one knows what the metric tensor equals everywhere at an initial time. This situation is analogous to the failure of the Maxwell Equations to determine the potentials uniquely. In both cases, the ambiguity can be removed by gauge fixing. Thus, coordinate conditions are a type of gauge condition.[1] No coordinate condition is generally covariant, but many coordinate conditions are Lorentz covariant or rotationally covariant.

Naively, one might think that coordinate conditions would take the form of equations for the evolution of the four coordinates, and indeed in some cases (e.g. the harmonic coordinate condition) they can be put in that form. However, it is more usual for them to appear as four additional equations (beyond the Einstein field equations) for the evolution of the metric tensor. The Einstein field equations alone do not fully determine the evolution of the metric relative to the coordinate system. It might seem that they would since there are ten equations to determine the ten components of the metric. However, due to the second Bianchi identity of the Riemann curvature tensor, the divergence of the Einstein tensor is zero which means that four of the ten equations are redundant, leaving four degrees of freedom which can be associated with the choice of the four coordinates. It should be noted that the same result can be derived from a Kramers-Moyal-van-Kampen expansion of the Master equation (using the Clebsch-Gordon coefficients for decomposing tensor products).

Harmonic coordinates

A particularly useful coordinate condition is the harmonic condition (also known as the "de Donder gauge"):

0 = \Gamma^{\alpha}_{\beta \gamma} g^{\beta \gamma} \!.

Here, gamma is a Christoffel symbol (also known as the "affine connection"), and the "g" with superscripts is the inverse of the metric tensor. This harmonic condition is frequently used by physicists when working with gravitational waves. This condition is also frequently used to derive the post-Newtonian approximation.

Although the harmonic coordinate condition is not generally covariant, it is Lorentz covariant. This coordinate condition resolves the ambiguity of the metric tensor g_{\mu \nu} \! by providing four additional differential equations that the metric tensor must satisfy.

Synchronous coordinates

Another particularly useful coordinate condition is the synchronous condition:

g_{01} = g_{02} = g_{03} = 0 \!

and

g_{00} = -1 \!.

Synchronous coordinates are also known as Gaussian coordinates.[2] They are frequently used in cosmology.[3]

The synchronous coordinate condition is neither generally covariant nor Lorentz covariant. This coordinate condition resolves the ambiguity of the metric tensor g_{\mu \nu} \! by providing four algebraic equations that the metric tensor must satisfy.

Other coordinates

Many other coordinate conditions have been employed by physicists, though none as pervasively as those described above. Almost all coordinate conditions used by physicists, including the harmonic and synchronous coordinate conditions, would be satisfied by a metric tensor that equals the Minkowski tensor everywhere. Unlike the harmonic and synchronous coordinate conditions, some commonly used coordinate conditions may be either under-determinative or over-determinative.

An example of an under-determinative condition is the algebraic statement that the determinant of the metric tensor is negative one, which still leaves considerable gauge freedom.[4] This condition would have to be supplemented by other conditions in order to remove the ambiguity in the metric tensor.

An example of an over-determinative condition is the algebraic statement that the difference between the metric tensor and the Minkowski tensor is simply a null four-vector times itself, which is known as a Kerr-Schild form of the metric.[5] This Kerr-Schild condition goes well beyond removing coordinate ambiguity, and thus also prescribes a type of physical space-time structure. The determinant of the metric tensor in a Kerr-Schild metric is negative one, which by itself is an under-determinative coordinate condition.[4][6]

When choosing coordinate conditions, it is important to beware of illusions or artifacts that can be created by that choice. For example, the Schwarzschild metric may include an apparent singularity at a surface that is separate from the point-source, but that singularity is merely an artifact of the choice of coordinate conditions, rather than arising from actual physical reality.[7]

Lorentz covariant coordinate conditions

If one combines a coordinate condition which is Lorentz covariant, such as the harmonic coordinate condition mentioned above, with the Einstein field equations, then one gets a theory which is in some sense consistent with both special and general relativity. Among the simplest examples of such coordinate conditions are these:

  1. g_{\alpha \beta , \gamma} \eta^{\beta \gamma} = k \, g_{\mu \nu , \alpha} \eta^{\mu \nu} \,.
  2. g^{\alpha \beta}{}_{, \beta} = k \, g^{\mu \nu}{}_{, \gamma} \eta_{\mu \nu} \eta^{\alpha \gamma} \,.

where one can fix the constant k to be any convenient value.

Footnotes

  1. ^ Salam, Abdus et al. Selected Papers of Abdus Salam, page 391 (World Scientific 1994).
  2. ^ Stephani, Hans and Stewart, John. General Relativity, page 20 (Cambridge University Press 1990).
  3. ^ C.-P. Ma and E. Bertschinger (1995). "Cosmological perturbation theory in the synchronous and conformal Newtonian gauges". Astrophysics J. 455: 7–25. arXiv:astro-ph/9506072. Bibcode 1995ApJ...455....7M. doi:10.1086/176550. 
  4. ^ a b Pandey, S.N. “On a Generalized Peres Space-Time,” Indian Journal of Pure and Applied Mathematics (1975) citing Moller, C. The Theory of Relativity (Clarendon Press 1972).
  5. ^ Chandrasekhar, S. The Mathematical Theory of Black Holes, page 302 (Oxford University Press, 1998). Generalizations of the Kerr-Schild conditions have been suggested; e.g. see Hildebrandt, Sergi. “Kerr-Schild and Generalized Metric Motions,” page 22 (Arxiv.org 2002).
  6. ^ Stephani, Hans et al. Exact Solutions of Einstein's Field Equations, page 485 (Cambridge University Press 2003).
  7. ^ Date, Ghanashyam. “Lectures on Introduction to General Relativity”, page 26 (Institute of Mathematical Sciences 2005).

Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Coordinate-free — A coordinate free, or component free, treatment of a scientific theory or mathematical topic develops its ideas without reference to any particular coordinate system. Coordinate free treatments generally allow for simpler systems of equations,… …   Wikipedia

  • Coordinate-measuring machine — A coordinate measuring machine (CMM) is a device for measuring the physical geometrical characteristics of an object. This machine may be manually controlled by an operator or it may be computer controlled. Measurements are defined by a probe… …   Wikipedia

  • Harmonic coordinate condition — The harmonic coordinate condition is one of several coordinate conditions in general relativity, which make it possible to solve the Einstein field equations. A coordinate system is said to satisfy the harmonic coordinate condition if each of the …   Wikipedia

  • Cartesian coordinate system — Illustration of a Cartesian coordinate plane. Four points are marked and labeled with their coordinates: (2, 3) in green, (−3, 1) in red, (−1.5, −2.5) in blue, and the origin (0, 0) in purple. A Cartesian coordinate system specifies each point… …   Wikipedia

  • Homogeneous coordinate ring — In algebraic geometry, the homogeneous coordinate ring R of an algebraic variety V given as a subvariety of projective space of a given dimension N is by definition the quotient ring R = K[X0, X1, X2, ..., XN]/I where I is the homogeneous ideal… …   Wikipedia

  • Numerical relativity — is one of the branches of general relativity that uses numerical methods and algorithms to solve and analyze problems. To this end, supercomputers are often employed to study black holes, gravitational waves, neutron stars and many other… …   Wikipedia

  • Mathematics of general relativity — For a generally accessible and less technical introduction to the topic, see Introduction to mathematics of general relativity. General relativity Introduction Mathematical formulation Resources …   Wikipedia

  • General covariance — In theoretical physics, general covariance (also known as diffeomorphism covariance or general invariance) is the invariance of the form of physical laws under arbitrary differentiable coordinate transformations. The essential idea is that… …   Wikipedia

  • china — /chuy neuh/, n. 1. a translucent ceramic material, biscuit fired at a high temperature, its glaze fired at a low temperature. 2. any porcelain ware. 3. plates, cups, saucers, etc., collectively. 4. figurines made of porcelain or ceramic material …   Universalium

  • China — /chuy neuh/, n. 1. People s Republic of, a country in E Asia. 1,221,591,778; 3,691,502 sq. mi. (9,560,990 sq. km). Cap.: Beijing. 2. Republic of. Also called Nationalist China. a republic consisting mainly of the island of Taiwan off the SE coast …   Universalium

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”