- Pressure compounding in turbines
-
Diagram of a Rateau turbine
Pressure compounding is the method in which pressure in a steam turbine is made to drop in a number of stages rather than in a single nozzle. This method of compounding is used in Rateau and Zoelly turbines.
Contents
Construction
The arrangement consists of a number of simple impulse turbines in series mounted on a common shaft. The exit steam from one turbine is made to enter the nozzle of the succeeding turbine. Each of the simple impulse turbines would then be termed a "stage" of the turbine. Each stage comprises its ring of nozzle and blades. The steam from the boiler passes through the first nozzle ring where its pressure drops and velocity increases. The high velocity jet steam is directed onto the first moving blades wherein nearly all of its velocity is absorbed. The steam pressure remains unaltered. The steam from the first ring of moving blades enters the second ring of nozzles where its pressure is further reduced. The next ring of moving blades absorbs the velocity obtained from this second ring nozzle. The process is repeated in the remaining rings until the whole of the pressure has been absorbed.
Effect
Thus the total pressure drop of the steam does not take place in a nozzle, but is divided equally between all the nozzle rings in the arrangement. The effect of absorbing the pressure drop in stages is to reduce considerably the velocity of the steam entering the moving blades.
See also
- Compound turbine
- Impulse turbine
- Steam turbine
- Turbine#Other
References
External links
This article about a mechanical engineering topic is a stub. You can help Wikipedia by expanding it.
