Colorado State Highway 79

Colorado State Highway 79

State Highway 79 marker

State Highway 79
Kiowa-Bennett Road
Converse Road
Route information
Maintained by CDOT
Length: 23.76 mi[1] (38.2 km)
Major junctions
South end: I-70 / US 40 / US 287 near Bennett
  US 36.svg US 36 at Bennett
North end: SH 52 at Prospect Valley
Location
Counties: Adams, Weld
Highway system

Colorado State Highways

SH 78 SH 82

State Highway 79 is a 23.8 mi (38.3 km) long state highway in Adams and Weld counties in Colorado. It starts at The highway is also called "Kiowa–Bennett Road" and "Converse Road". It traverses through remote, open plain. The highway does not pass through any towns. It does service some subdivisions in the area. SH 79 ends at SH 52 in Prospect Valley.

Contents

Route description

The road begins at Interstate 70, concurrent there with U.S. Route 287 and U.S. Route 40. It then heads northward into the town of Bennett, where it abruptly turns eastward and begins a short concurrency with U.S. Route 36. It then heads back northward slowly into a mass of rectangular fields, crossing the AdamsWeld county line. It continues northward in the same terrain, crossing numerous county roads, to its north end at SH 52.[2]

History

The road was established in the 1920s, when it connected Bennett to Prospect. SH 79 was extended to Elbert County in 1954. The following year, the extension was deleted. The road was entirely paved and extended again down to its current terminus at Interstate 70 in 1963.[3]

Major intersections

County Location Mile[1] Destination Notes
Adams 0.00 I-70 / US 40 / US 287 / US 36 Interchange
Bennett 1.24 SH 36 west South end of SH 36 overlap; Former US 36
1.58 SH 36 east North end of SH 36 overlap; Former US 36
Weld Prospect Valley 23.89 SH 52
1.000 mi = 1.609 km; 1.000 km = 0.621 mi
     Concurrency terminus     Closed/Former     Incomplete access     Unopened

References


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”