Tampico Bridge

Infobox_Bridge
bridge_name=Tampico Bridge


caption=
official_name=Puente Tampico
carries=
crosses=Pánuco River
locale=Tampico, Tamaulipas, Mexico
maint=
id=
design= Cable-stayed bridge
mainspan=
length= 1,543 m (5062 ft)
width= 18 m (59 ft)
height= 55 m (180 ft)
clearance= 360 m (1181 ft)
below=
traffic=
open=1988
closed=
toll=
map_cue=
map_

map_text=
map_width=
coordinates= coord|22|13|42|N|97|50|13|W|region:FR_type:landmark
lat=
long=

The Tampico Bridge (Spanish: "Puente Tampico") is a vehicular cable-stayed bridge in Mexico, located on the Pánuco River in the city of Tampico, Tamaulipas, near to the Gulf of Mexico. The bridge has been in service since 1988 and was designed by Professor Modesto Armijo from COMEC, a Mexican engineering company. It was designed to withstand the severe hurricanes of the Gulf of Mexico. It connects the states of Tamaulipas and Veracruz.

The bridge uses an orthotropic steel deck girder for a central section of the 360 m long main span, while the rest of the main span and the short lateral spans are a prestressed concrete girder. Both steel and concrete deck girders have the same external shape. This original principle was later used at the French Normandy cable-stayed bridge (756 m main span).

The dynamic analysis of the bridge under turbulent cyclonic winds, as well as the revision of the structural project, and the geometry plus stress control of the bridge during erection, were achieved by Alain Chauvin from Sogelerg, using the French "Scanner" computer program.