SFF-8489

SFF-8489

The SFF-8489 is a specification for the International Blinking Pattern Interpretation (IBPI) standard and protocol, and defined and maintained by the Standard Form Factor Committee.

See IBPI for a full description of this interface.

External links

* [ftp://ftp.seagate.com/sff/SFF-8489.PDF SFF-8489] IBPI specification
* [ftp://ftp.seagate.com/sff/SFF-8485.PDF SFF-8485] SGPIO specification
* [ftp://ftp.seagate.com/sff/ SFF Documents] (Documents & Specifications)
* [http://www.ami.com/products/catpage.cfm?CatID=14 Backplane Controllers from AMI]

*MG9077 Backplane Management Controller With Dual SGPIO
*MG9082 Backplane Management Controller With Dual SGPIO and IBPI support


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • IBPI — is an acronym for International Blinking Pattern Interpretation (IBPI), and defines these two items: 1) How SGPIO is interpreted into states for drives or slots on a backplane. 2) How LEDs on a Backplane should represent these states. IBPI is a… …   Wikipedia

  • MG9082 — The MegaRAC© MG9082 is a Backplane Management Controller from American Megatrends, Inc. (AMI). Based on the most innovative management protocol in the field, SGPIO for SAS and SATA Host Bus Adapters, the MG9082 controller supports up to eight… …   Wikipedia

  • MG9077 — The MegaRAC© MG9077 is a Backplane Management Controller from American Megatrends, Inc. (AMI). Based on the most innovative management protocol in the field, Serial GPIO for SAS and SATA Host Bus Adapters, the MG9077 controller supports up to… …   Wikipedia

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”