TK 82C

TK 82C was a Sinclair ZX81 clone made by Microdigital Eletrônica Ltda, a computer company located in Brazil.

General Information

The TK 82C had the ZILOG Z80A processor running at 3.25 MHz, 2 KB SRAM and 8 KB of EPROM with the BASIC interpreter. The keyboard was made of layers of conductive (membrane) material and followed the Sinclair pattern. The video output was sent via a RF modulator to a TV set tuned at VHF channel 3, and it featured black characters on a white background. The maximum resolution was 64 x 44 pixels black and white, for graphic plotting. There were some special characters (shade patterns) useful for games and basic images.

The TK 82C included the SLOW function which permitted the video be shown during the processing (the prior version, TK 82, ran only in fast mode, so the image was not shown during its processing). In reality, the SLOW function was done by an add-on board that was factory-mounted over the main board.

Although being a ZX81 clone, the TK 82C did not have the ULA chip from Ferranti, used in the former. Instead it was manufactured with a dozen of TTL integrated circuits, which resulted in a somewhat large power consumption. This could be noted as the computer's case used to become quite hot after some minutes of operation.

Data Storage

Data storage was done in audio cassette tapes at 300 bits per second, and large programs could take up to 6 minutes to load.

Audio cables were supplied with the computer for connection with a regular tape recorder.

As the data encoding was entirely done by software, some hacks were made available to allow much faster transfers. Hi-fi recorders were required in order to use the greater speeds with a minimum of reliability.

Accessories

* A 16 KB DRAM expansion was made available and, despite being optional, became a standard item. Soon after, a 48 KB expansion was also released, but due to pricing and the problematic data storage in cassettes, it never sold well.

* The TK 82C featured a DIN connector for a joystick (in reality, it was wired to the keyboard matrix); Microdigital then marketed an Atari 2600 joystick, accordingly retrofitted to match the DIN connector.

* A small printer, indeed a ZX Printer clone, was announced for a long time by Microdigital, but was never released.

Compatibility and Legal Issues

All software designed to the ZX81 could run in the TK 82C with no problems, and vice-versa. So it was not uncommon to find software distributed in Brazil, that were nothing more than pirated copies of products for the ZX81. However, given the TK 82's popularity, a great deal of original software was developed in Brazil as well.

In 1983, Sinclair Research sued Microdigital over copyright violation because of the unauthorized cloning of its product. Due to political trends from that time, the Brazilian court in charge of the case ended giving the win to Microdigital.

Later Products

The TK 82C (the C letter stands for "Científico", or Scientific in English) was replaced by the TK 83 (it used a ULA similar chip, as the original ZX81) and by the TK 85 (a 16 KB RAM version with a case similar to ZX-Spectrum), more robust and with a better design.

Microdigital later produced the TK 90X and TK 95, which were clones of the ZX Spectrum.

Trivia

TK82C is also a designation for a copier from Kyocera.