- Hook flash
Hook flash (sometimes labeled "flash") is a button on a
telephone that simulates quickly hanging up then picking up again (a quickoff-hook /on-hook /off-hook cycle). This action can signal thetelephone exchange to do something. A common use of hook flash is to switch to another incoming call with thecall waiting service. Another use is to indicate a request for voice conferencing. For example, a user may use a procedure like the following to initiatethree-way calling :#Pick up phone handset (causing the line to be
off-hook ).
#Hear a dialtone
#Dial the first number and greet the first party
#Press the hook flash button (or quickly tap the on-hook sensor on the phone)
#Hear a stutter dial tone (a series of beeps followed by another dialtone)
#Dial the second number and greet the second party
#Press the hook flash button again.The second "flash" signals the telephone switch to link the two active conversations, so that all three parties are connected to the same logical telephone line.
In contrast to PBX conferencing systems, the two calls are joined at the phone switch, rather than at the customer premises.
History
The term "flash" originates in the
cord circuit of the earlytelephone switchboard that telephone company operators used to connect calls. Thecalling party andcalled party each had a lamp on the cord circuit. When the subscriber cycled the telephone on-hook/off-hook, the light would flash. Actors in old movies often demonstrate the method, seeking the operator's attention. The user does a tap-tap-tap. When an operator comes on the line, the actor says, "Hello? Operator? We've been cut off." Then the operator attempts to reestablish the connection. The flashing light of this equipment of bygone days is the origin of the phrase "flashing the switchhook." The switchhook is the device that senses whether the handset or receiver is in its cradle.The button was added to
Centrex telephones in the 1960s when some users incorrectly attempted the attendant recall function.
Wikimedia Foundation. 2010.