Minimum audibility curve

Minimum audibility curve

Minimum audibility curve is a standardised graph of the threshold of hearing versus frequency for an average human, and is used as the reference level when measuring hearing loss with an audiometer as shown on an audiogram.

Audiograms are produced using a piece of test equipment called an audiometer, and this allows different frequencies to be presented to the subject, usually over calibrated headphones, at any specified level. The levels are, however, not absolute, but weighted with frequency relative to a standard graph known as the minimum audibility curve which is intended to represent 'normal' hearing. This is not the best threshold found for all subjects, under ideal test conditions, which is represented by around 0 Phon or the threshold of hearing on the equal-loudness contours, but is standardised in an ANSI standard to a level somewhat higher at 1 kHz [1]. There are several definitions of the minimal audibility curve, defined in different international standards, and they differ significantly, giving rise to differences in audiograms according to the audiometer used. The ASA-1951 standard for example used a level of 16.5dB SPL at 1 kHz whereas the later ANSI-1969/ISO-1963 standard uses 6.5dB SPL, and it is common to allow a 10dB correction for the older standard.

See also

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Audiogram — An audiogram is a standard way of representing a person s hearing loss [http://www.phonak.co.uk/ccuk/consumer/hearing/audiogram.htm] . Most audiograms cover the limited range 100Hz to 8000Hz (8kHz) which is most important for clear understanding… …   Wikipedia

  • Hearing range — for more detail on human hearing see Audiogram,Equal loudness contours and Hearing impairment. Hearing range usually describes the range of frequencies that can be heard by an animal or human, though it can also refer to the range of levels. In… …   Wikipedia

  • Decibel — This article is about the ratio of measures. For sound or acoustic level, see Sound pressure. For other uses, see Decibel (disambiguation). Attenuation chart of an RG 6 Coaxial cable, measured in decibels per 100 feet of cable The decibel (dB) is …   Wikipedia

  • motion-picture technology — Introduction       the means for the production and showing of motion pictures. It includes not only the motion picture camera and projector but also such technologies as those involved in recording sound, in editing both picture and sound, in… …   Universalium

  • Tube sound — (or valve sound) is the characteristic sound associated with a vacuum tube based audio amplifiers. Some audiophiles prefer the sound that is produced by the distortion characteristics of tube based amplifiers. The audible significance of tube… …   Wikipedia

  • Psychoacoustics — is the study of subjective human perception of sounds. Alternatively it can be described as the study of the psychological correlates of the physical parameters of acoustics. Background Hearing is not a purely mechanical phenomenon of wave… …   Wikipedia

  • Absolute threshold of hearing — The absolute threshold of hearing (ATH) is the minimum sound level of a pure tone that an average ear with normal hearing can hear with no other sound present. The absolute threshold relates to the sound that can just be heard by the… …   Wikipedia

  • theatre — /thee euh teuhr, theeeu /, n. theater. * * * I Building or space in which performances are given before an audience. It contains an auditorium and stage. In ancient Greece, where Western theatre began (5th century BC), theatres were constructed… …   Universalium

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”