- JIC fitting
JIC fittings, or SAE J514, or MIL-F-18866, are a type of
flare fitting having 37-degree flare seating surfaces and are widely used in hydraulic applications. JIC fittings are similar in size and threading to AN fittings. 45-degree flare SAE fittings are similar in thread, but not angle and are not interchangeable.JIC fitting systems have three components that make a tubing assembly: body, nut, and sleeve, and depend upon metal-to-metal contact between the finished surface of the fitting nose and the inside diameter of the flared tubing to make a seal. Common meterials of construction include
stainless steel , forgingbrass , machining brass,Monel , and nickel-copper alloys.As the fitting nose is installed on the flared tubing, they are held together by the fitting sleeve, which distributes the compressing load from the nut as it is threaded onto the fitting body. The sleeve extends to the back of the nut, which provides additional support for the tubing, and reduces longitudinal load on the fitting nose.
References
* [http://www.worldwidemetric.com/PDFs/CAST_SAE_J514.pdf World Wide Metric]
* [http://aero-defense.ihs.com/document/abstract/FSCNGBAAAAAAAAAA IHS]
* [http://www.parker.com/tfd/fittingsolutions/undercuts.pdf Parker.com]
Wikimedia Foundation. 2010.
