Rolls-Royce 15 hp

Infobox Automobile


name = Rolls-Royce 15 hp
manufacturer = Rolls-Royce Ltd
production = 1905
6 madeThe Rolls-Royce Motor Car. Anthony Bird and Ian Hallows. Batsford Books. 2002 ISBN 07134 8749 6]
class =
body_style =
engine = 3000cc 3 cylinder.
transmission = three speed
length =
width =
height =
weight =
wheelbase = Auto in|103|0
successor =
designer = Sir Henry RoyceThe Rolls-Royce 15 hp is an early car model produced by Rolls-Royce at their Manchester works and made only in 1905. It was exhibited at the 1904 Paris Motor Salon along with the 10hp, 20hp and engine for the 30hp models but as the new three cylinder engine was not ready the chassis was incomplete.

Three cylinder engines were quite popular in the early years of motoring and one was part of the ambitious programme of the new company. The layout produced less vibration than 2 cylinder engines and was much simpler to make than a six cylinder with its long crankshaft. However, Royce was making his range of engines using a standard two cylinder block, putting two together for the four cylinder and three for the six. The three cylinder engine did not fit in with this production having each of its cylinders cast separately and this is thought to be the reason why only six were made. The engine, which has a bore of Auto in|4|0 and stroke of Auto in|5|0 is water-cooled and of 3000 cc capacity with overhead inlet and side exhaust valves. A high tension ignition system using pre-charged accumulators, a trembler and a coil provides the ignition spark. As the lighting supplied uses oil, there is no other drain on the accumulators.The power output is Auto bhp|15|0 at 1000 rpm. [Rolls-Royce Motor Cars website http://www.rolls-roycemotorcars.com] The engine speed is controlled by a governor that can be over-ridden by the pedal controlled accelerator. A three speed gearbox is used, connected to the engine via a short shaft and a leather cone clutch is used.

The car has a top speed of Auto mph|39|0. There is a transmission brake fitted behind the gearbox operated by foot pedal and internal expanding drum brakes on the back axle operated by the handbrake lever. Springing is by semi-elliptic leaf springs on both front and rear axles with an additional crossways helper spring on the rear of some of the cars. Artillery type wheels were fitted.

Rolls-Royce did not provide the coachwork. Instead, the cars were sold in chassis form for the customer to arrange his own body supplier, with Barker recommended.

The car, in chassis only form, was priced at GBP500.

Only one car, registered SD 661 is known to survive.

References