- Hot stick
A hot stick is an insulated pole, usually made of
fiberglass , used by electric utility workers when working on high-voltage electric power lines while energized. Depending on the tool attached to the end of the hot stick, it is possible to test for voltage, tighten nuts and bolts, applytie wires (twisted lengths of ductile wire which fasten the running cable to its supporting insulators), open and closeswitch es, replace fuses, lay insulating sleeves on wires, and perform various other tasks while not exposing the crew to a large risk ofelectric shock .Because the fiberglass provides
electrical insulation , the hot stick allows utility workers to safely perform operations on power lines without deenergizing them or while the state of the power line is not yet known. This is essential because certain operations (such as opening or closing combination fuse/switches) must occasionally be performed on an energized line. Additionally, after a fault occurs, the exact state of a line may not be certain; in this case, for reasons of crew safety, the utility workers must treat the line as though it were energized until it can be proven that it is not and safety ground cables can be applied to the line (so that the line is guaranteed to remain grounded/earthed while maintenance is performed upon it).If power tools are fitted to the end of the hot stick, they are usually powered hydraulically rather than electrically because, like the fiberglass of the hot stick, the hydraulic fluid is also a good insulator. The hydraulic power is commonly supplied from the bucket truck (
cherry picker oraerial work platform ) supporting the workers.The hot stick not only electrically insulates the worker from the energized conductor, it provides physical separation from the device being operated, to reduce the chances of burns which might result from electrical arcing if there is a malfunction of the device being operated. [http://www.ohsonline.com/articles/44540/] [http://www.youtube.com/watch?v=P4CfHi4k3x4]
Wikimedia Foundation. 2010.