Geophysical MASINT

Geophysical MASINT

Geophysical MASINT is a branch of Measurement and Signature Intelligence (MASINT) that involves phenomena transmitted through the earth (ground, water, atmosphere) and manmade structures including emitted or reflected sounds, pressure waves, vibrations, and magnetic field or ionosphere disturbances.citation
last = US Army
title = Chapter 9: Measurement and Signals Intelligence
work = Field Manual 2-0, Intelligence
publisher = Department of the Army
date = May 2004
url =
accessdate = 2007-10-03

According to the United States Department of Defense, MASINT is technically derived intelligence (excluding traditional imagery IMINT and signals intelligence SIGINT) that – when collected, processed, and analyzed by dedicated MASINT systems – results in intelligence that detects, tracks, identifies, or describes the signatures (distinctive characteristics) of fixed or dynamic target sources. MASINT was recognized as a formal intelligence discipline in 1986.citation
last = Interagency OPSEC Support Staff (IOSS)
title = Operations Security Intelligence Threat Handbook: Section 2, Intelligence Collection Activities and Disciplines
date = May 1996
url =
accessdate = 2007-10-03
] Another way to describe MASINT is a "non-literal" discipline. It feeds on a target's unintended emissive by-products, the "trails" - the spectral, chemical or RF that an object leaves behind. These trails form distinct signatures, which can be exploited as reliable disriminators to characterize specific events or disclose hidden targets."citation
last = Lum
first = Zachary
title = The measure of MASINT
journal = Journal of Electronic Defense
date = August 1998
url =
accessdate = 2007-10-04

As with many branches of MASINT, specific techniques may overlap with the six major conceptual disciplines of MASINT defined by the Center for MASINT Studies and Research, which divides MASINT into Electro-optical, Nuclear, Geophysical, Radar, Materials, and Radiofrequency disciplines.citation
last = Center for MASINT Studies and Research
title = Center for MASINT Studies and Research
publisher = Air Force Institute of Technology | url =
id = CMSR
accessdate = 2007-10-03

Military Requirements

Geophysical sensors have a long history in conventional military and commercial applications, from weather prediction for sailing, to fish finding for commercial fisheries, to nuclear test ban verification. New challenges, however, keep emerging.

First-world military forces, opposing other conventional militaries, there is an assumption that if a target can be located, it can be destroyed. As a result, concealment and deception have taken on new criticality. "Stealth" low-observability aircraft have gotten much attention, and new surface ship designs feature observability reduction. Operating in the confusing littoral environment produces a great deal of concealing interference.

Of course, submariners feel they invented low observability, and others are simply learning from them. They know that going deep or at least ultraquiet, and hiding among natural features, makes them very hard to detect.

Two families of military applications, among many, represent new challenges against which geophysical MASINT can be tried. Also, see Unattended Ground Sensors.

Deeply Buried Structures

One of the easiest ways for nations to protect weapons of mass destruction, command posts, and other critical structures is to bury them deeply, perhaps enlarging natural caves or disused mines. Deep burial is not only a means of protection against physical attack, as even without the use of nuclear weapons, there are deeply penetrating precision guided bombs that can attack them. Deep burial, with appropriate concealment during construction, is a way to avoid the opponent's knowing the buried facility's position well enough to direct precision guided weapons against it.

Finding deeply buried structures, therefore, is a critical military requirementcitation
author = Arnold H. Streland
title = Going Deep: A System Concept for Detecting Deeply Buried Structures from Space
date = 23 February 2003
url =
accessdate = 2007-10-18
] . The usual first step in finding a deep structure is IMINT, especially using hyperspectral IMINT sensors to help eliminate concealment. "Hyperspectral images can help reveal information not obtainable through other forms of imagery intelligence such as the moisture content of soil. This data can also help distinguish camouflage netting from natural foliage." Still, a facility dug under a busy city would be extremely hard to find during construction. When the opponent knows that it is suspected that a deeply buried facility exists, there can be a variety of decoys and lures, such as buried heat sources to confuse infrared sensors, or simply digging holes and covering them, with nothing inside.

MASINT using as acoustic, seismic, and magnetic sensors would appear to have promise, but the reality of these sensors is that they must be fairly close to the target. Magnetic Anomaly Detection (MAD) is used, in antisubmarine water, for final localization before attack. The existence of the submarine is usually established through passive listening and refined with directional passive sensors and active sonar.

Once these sensors, as well as HUMINT and other sources, have failed, there is promise, for surveying large areas and deeply concealed facilities, using gravitimetric sensors. Gravity sensors are a new field, but military requirements are making it important while the technology to do it is becoming possible.

Naval Operations in Shallow Water

Especially in today's "green water" and "brown water" naval applications, navies are looking at MASINT solutions to meet new challenges of operating in littoral areas of operations cite web
last = National Academy of Sciences Commission on Geosciences, Environment and Resources
title = Symposium on Naval Warfare and Coastal Oceanography
date = April 29-May 2, 1991
url =
accessdate = 2007-10-17
] . This symposium found it useful to look at five technology areas, which are interesting to contrast to the generally accepted categories of MASINT: acoustics and geology and geodesy/sediments/transport, nonacoustical detection (biology/optics/chemistry), physical oceanography, coastal meteorology, and electromagnetic detection.

Although it is unlikely there will ever be another WWII-style opposed landing on a fortified beach, another aspect of the littoral is being able to react to opportunities for amphibious warfare. Detecting shallow-water and beach mines remains a challenge, since mine warfare is a deadly "poor man's weapon."

While initial landings from an offshore force would be from helicopters or tiltrotor aircraft, with air cushion vehicles bringing ashore larger equipment, eventually, traditional landing craft, portable causeways, or other equipment will be needed to bring heavy equipment across a beach. Shallow depth and natural underwater obstacles can block a beach as well as can shallow-water mines. Synthetic Aperture Radar (SAR), airborne laser detection and ranging (LIDAR)) and use of bioluminescence to detect wake trails around underwater obstacles all may help solve this challenge.

Moving onto and across the beach has its own challenges. Remotely operated vehicles may be able to map landing routes, and they, as well as LIDAR and multispectral imaging, may be able to detect shallow water. Once on the beach, the soil has to support heavy equipment. Techniques here include estimating soil type from multispectral imaging, or from an airdropped penetrometer that actually measures the loadbearing capacity of the surface.

Weather and Sea Intelligence MASINT

The science and art of weather prediction used the ideas of measurement and signatures to predict phenomena, long before there were any electronic sensors. Masters of sailing ships might have no more sophisticated instrument than a wetted finger raised to the wind, and the flapping of sails.

Weather information, in the normal course of military operations, has a major effect on tactics. High winds and low pressures can change artillery trajectories. High and low temperatures cause both people and equipment to require special protection. Aspects of weather, however, also can be measured and compared with signatures, to confirm or reject the findings of other sensors.

The state of the art is to fuse meteorological, oceanographic, and acoustic data in a variety of display modes. Temperature, salinity and sound speed can be displayed horizontally, vertically, or in three-dimensional perspective [Citation
author = Jim Hart
title = SUBPAC METOC Training, Support, AND NAVO Storm Production
volume = National Security Policy; Arms Control and Disarmament, Volume III
place= Washington, DC
publisher = US Department of State (summary by Federation of American Scientists)
url =
id = FRUS58
] .

Predicting Weather based on Measurements and Signatures

While early sailors had no sensors beyond their five senses, the modern meteorologist has a wide range of geophysical and electro-optical measuring devices, operating on platforms from the bottom of the sea to deep space. Prediction based on these measurements are based on signatures of past weather events, a deep understanding of theory, and computational models.

Weather predictions can give significant negative intelligence, when the signature of some combat system is such that it can operate only under certain weather conditions. Weather has long been an extremely critical part of modern military operations, as when the decision to land at Normandy on June 6, rather than June 5, 1944 depended on Dwight D. Eisenhower's trust in his staff weather advisor, Group Captain James Martin Stagg. It is rarely understood that something as fast as a ballistic missile reentry vehicle, or as "smart" as a precision guided munition, can still be affected by winds in the target area.

As part of Unattended Ground Sensors, cite web
author = Mark Hewish
title = Reformatting Fighter Tactics
journal = Jane's International Defense Review
date = June 2001
url =
id = JaneJune2001
accessdate = 2007-10-17
] . The Remote Miniature Weather Station (RMWS), from System Innovations, is an air-droppable version with a lightweight, expendable and modular system comprised of two components; a meteorological (MET) sensor and a ceilometer (cloud ceiling height) with limited MET. The basic MET system is surface-based and measures wind speed and direction, horizontal visibility, surface atmospheric pressure, air temperature and relative humidity. The ceilometer sensor determines cloud height and discreet cloud layers. The system provides near-real-time data capable of 24-hour operation for 60 days. The RMWS can also go in with US Air Force Special Operations combat weathermen cite web
author = Scott R. Gourley
title = Storm Warnings: A look at U.S. Air Force special operations combat weathermen
journal = Special Operations Technology Online Archives
date = July 23, 2003
url =
id = Gourley 2003
accessdate = 2007-10-22
] The man-portable version, brought in by combat weathermen, has an additional function, s remote miniature ceilometer. Designed to measure multiple layer cloud ceiling heights and then send that data via satellite communications link to an operator display, the system uses a Neodinum YAG (NdYAG), 4 megawatt non-eye safe laser. According to one weatherman, "We have to watch that one,” he said. “Leaving it out there basically we’re worried about civilian populace going out there and playing with it—firing the laser and there goes somebody’s eye. There are two different units [to RMWS] . One has the laser and one doesn’t. The basic difference is the one with the laser is going to give you cloud height."

He cautioned that the unit was not without its operational restrictions or limitations: the primary one being eye safety. As an example, one ancillary system to the RMWS is the remote miniature ceilometer. Designed to measure multiple layer cloud ceiling heights and then send that data via satellite communications link to an operator display, the system uses a Neodinum YAG (NdYAG), 4 megawatt non-eye safe laser.

Hydrographic Sensors

Hydrographic MASINT is subtly different from weather, in that it considers factors such as water temperature and salinity, biologic activities, and other factors that have a major effect on sensors and weapons used in shallow water. ASW equipment, especially acoustic performance depends on the season the specific coastal site. Water column conditions, such as temperature, salinity, and turbidity are more variable in shallow than deep water. Water depth will influence bottom bounce conditions, as will the material of the bottom. Seasonal water column conditions (particularly summer versus winter) are inherently more variable in shallow water than in deep water.

While much attention is given to shallow waters of the littoral, other areas have unique hydrographic characteristics.

:*regional areas with fresh water eddies:*open ocean salinity fronts:*near ice floes:*under ice

A submarine tactical development activity observed, "Fresh water eddies exist in many areas of the world. As we have experienced recently in the Gulf of Mexico using the Tactical Oceanographic Monitoring System (TOMS), there exist very distinct surface ducts that causes the Submarine Fleet Mission Program Library (SFMPL) sonar prediction to be unreliable. Accurate bathythermic information is paramount and a precursor for accurate sonar predictions.”

Temperature and Salinity

Critical to the prediction of sound, needed by active and passive MASINT systems operating in water is knowing the temperature and salinity at specific depths. Antisubmarine aircraft, ships, and submarines can release independent sensors that measure the water temperature at various depths. The water temperature is critically important in acoustic detections, as changes in water temperature at thermoclines can act as a "barrier" or "layer" to acoustic propagation. To hunt a submarine, which is aware of water temperature, the hunter must drop acoustic sensors below the thermocline.

Water conductivity is used as a surrogate marker for salinity. The current and most recently developed software, however, does not give information on suspended material in the water or bottom characteristics, both considered critical in shallow-water operations.

The US Navy does this by dropping expendable probes, which transmit to a recorder, of 1978-1980 vintage, the AN/BQH-7 for submarines and the AN/BQH-71 for surface ships. While the redesign of the late seventies did introduce digital logic, the devices kept hard-to-maintain analog recorders, and maintainability became critical by 1995. A project was begun to extend with COTS components, to result in the AN/BQH-7/7A EC-3citation
author = Larry Reynolds Moss
title = Fleet Introduction Project for the United States Navy's Next Generation Bathythermograph recorder system
version =
publisher = Virginia Polytechnic Institute and State University
date = 25 April 1997
url =
accessdate = 2007-10-17
service life extension] . In 1994-5, the maintainability of the in-service units became critical.

Variables in selecting the appropriate probe include::*Maximum depth sounded:*Speed of launching vessel:*Resolution Vertical Distance Between Data Points (ft):*Depth Accuracy


Large schools of fish contain enough entrapped air to conceal the sea floor, or manmade underwater vehicles and structures. Fishfinders, developed for commercial and recreational fishing, are specialized sonars that can identify acoustic reflections between the surface and the bottom. Variations on commercial equipment are apt to be needed, especially in littoral areas rich in marine life.

ea Bottom Measurement

A variety of sensors can be used to characterise the sea bottom into, for example, mud, sand, and gravel. Active acoustic sensors are the most obvious, but there is potential information from gravitimetric sensors, electro-optical and radar sensors for making inferences from the water surface, etc.

Relatively simple sonars such as echo sounders can be promoted to seafloor classification systems via add-on modules, converting echo parameters into sediment type. Different algorithms exist, but they are all based on changes in the energy or shape of the reflected sounder pings.

Side-scan sonars can be used to derive maps of the topography of an area by moving the sonar across it just above the bottom. Multibeam hull-mounted sonars are not as precise as a sensor near the bottom, but both can give reasonable three-dimensional visualization.

Another approach comes from greater signal processing of existing military sensorscite web
author = W.E. Avera
coauthors = M.M. Harris, D.J. Walter, L.D. Bibee, and D.N. Lambert
title = Through-The-Sensors Concepts to Refresh the Environmental Picture
publisher = Naval Research Laboratory
url =
accessdate = 2007-10-18
] . The US Naval Research Laboratory demonstrated both seafloor characterization, as well as subsurface characteristics of the seafloor. Sensors used, in different demonstrations, included normal incidence beams from the AM/UQN-4 surface ship depthfinder, and AN/BQN-17 submarine fathometer; backscatter from the Kongsberg EM-121 commercial multibeam sonar; AN/UQN-4 fathometers on mine countermeasures (MCM) ships, and the AN/AQS-20 mine-hunting system. These produced the "Bottom and Subsurface Characterization" graphic.

Weather effects on chemical, biological, and radiological weapon propagation

One of the improvements in the Fuchs 2 reconnaissance vehicle Citation
author = Leo M. van Westerhoven
title = The Fuchs NBC reconnaissance system is getting a makeover
journal = Chemical Biological Warfare Review
year = 2007
url =
accessdate = 1007-10-17
] is adding onboard weather instrumentations, including data such as wind direction and speed;, air and ground temperature; barometric pressure and humidity.

Acoustic MASINT

This includes the collection of passive or active emitted or reflected sounds, pressure waves or vibrations in the atmosphere (ACOUSTINT) or in the water (ACINT) or conducted through the ground Going well back into the Middle Ages, military engineers would listen to the ground for sounds of telltale digging under fortifications.

In modern times, acoustic sensors were first used in the air, as with artillery ranging in WWI. Passive hydrophones were used by the WWI Allies against German submarines; the UC-3, was sunk with the aid of hydrophone on 23 April 1916. Since submerged submarines cannot use radar, passive and active acoustic systems are their primary sensors. Especially for the passive sensors, the submarine acoustic sensor operators must have extensive libraries of acoustic signatures, to identify sources of sound.

In shallow water, there are sufficient challenges to conventional acoustic sensors that additional MASINT sensors may be required. Two major confounding factors are::*Boundary interactions. The effects of the seafloor and the sea surface on acoustic systems in shallow water are highly complex, making range predictions difficult. Multi-path degradation affects overall figure of merit and active classification. As a result, false target identifications are frequent.:*Practical limitations. Another key issue is the range dependence of shallow water propagation and reverberation. For example, shallow water limits the depth of towed sound detection arrays, thus increasing the possibility of the system's detecting its own noise. In addition, closer ship spacing increases the potential for mutual interference effects. It is believed that nonacoustic sensors, of magnetic, optical, bioluminescent, chemical, and hydrodynamic disturbances will be necessary in shallow-water naval operations.

Counterbattery and Countersniper Location and Ranging

While now primarily of historical interest, one of the first applications of acoustic and optical MASINT was locating enemy artillery by the sound and flash of their firing, a technique pioneered by Canadian Forces under Gen. Arthur Currie, with Andrew McNaughton in a key staff role. cite web
last = Cameron
first = Fred
title = A Century of Operational Analysis for Commanders in the Canadian Army
url =
accessdate = 2007-10-03
] The combination of sound ranging (i.e., acoustic MASINT) and flash ranging (i.e., before modern optoelectronics) gave information unprecedented for the time, in both accuracy and timeliness. Enemy gun positions were located within 25 to 100 yards, with the information coming in three minutes or less.

Initial WWI Counterbattery Acoustic Systems

In the "Sound Ranging" graphic, the Listening Post, which is well forward of the microphone stations, sends an electrical signal to the microphone stations (MS) when the LP operator hears the gun's sound at time T0. Either manually or electrically, each MSx sends a starting pulse to an oscillograph. When the MS operator hears the sound, he stops the signal sent to the oscillograph. The oscillograph operator can then compute a time of arrival Ax, which is the difference between the T0 and TMx. Without computer assistance, the range had to be computed manually.

The positions of the microphone stations and listening posts are precisely known. Each Ax can be graphed as a hyperbola. Where the asympotes of the hyperbola meet is the position at which the gun is assumed to be located.

Where sound ranging is a time-of-arrival technique not dissimilar to that of modern multistatic sensors, flash ranging used theodolites to take bearings on the flash from the presurveyed flash observation post. The location of the gun was determined goniometrically, where the bearings intersected. Flash ranging, today, would be called electro-optical MASINT.

Artillery sound and flash ranging remained in use through WWII and into the postwar years, until mobile counterbattery radar, itself a MASINT radar sensor, became available. These techniques anticipated, and then paralleled, radio direction finding in SIGINT, which first was goniometric and now, with the precision time synchronization from GPS, is often time-of-arrival.

If the observation was at night, the Canadian master gunner could compare the sound and flash, while only sound was available in daylight. The Canadian units still had to estimate wind, temperature, and barometric pressure on the trajectory to the German artillery. and manually -- and quickly -- compute firing orders. Optimal times were on the order of three minutes.

Modern Acoustic Artillery Locators

Artillery positions now are located primarily with counterartillery radar, such as the US AN/TPQ-37, as well as IMINT. SIGINT also may give clues to positions, both with COMINT for firing orders, and ELINT for such things as weather radar. Still, there is renewed interest in both acoustic and electro-optical systems to complement counterartillery radar.

Acoustic sensors have come a long way since WWI. Typically, the acoustic sensor is part of a combined system, in which it cues radar or electro-optical sensors of greater precision, but narrower field of view.


The UK's hostile artillery locating system (HALO) has been in service with the British Army since 2002. HALO is not as precise as radar, but especially complements the directional radars. It passively detects artillery cannon, mortars and tank guns, with 360 degree coverage and can monitor over 2,000 square kilometers. HALO has worked in urban areas, the mountains of the Balkans, and the deserts of IraqCitation
author = Daniel W. Caldwell
title = Radar planning, preparation and employment of 3-tiered coverage: LCMR, Q-36 and Q-37
url =,+preparation+and+employment+of+3-tiered+coverage:...-a0123856463
accessdate = 2000-10-19
] .

The system consists of a distributed array of up to 12 acoustic pressure sensors, which can compute location data on up to 8 rounds per second, and forwarding the data to the system operator. Assuming typical sensor dispersion, three or more sensors will measure the pressure wave, and the triangulation of the system computer can match a signature and help the AN/TPQ-36 and TPQ-37 Firefinder radars, which are not omnidirectional, to focus on the correct vector.


Another acoustic system is the US Army Unattended Transient Acoustic MASINT Sensor (UTAMS), which detects detect mortar and rocket launches and impacts. UTAMS has three to five acoustic arrays, each with four microphones, a processor, radio link, power source, and a laptop control computer. UTAMS, which was first operational in Iraq cite web
url =
title = Terrain denial missions in OIF III
journal = Field Artillery
date = July-August, 2005
author = Lopez, Justino Jr.
accessdate = 2007-12-01
] , first tested in November 2004 at a Special Forces Operating Base (SFOB) in Iraq. UTAMS was used in conjunction with AN/TPQ-36 and AN/TPQ-37 counter-artillery radar. While UTAMS was intended principally for detecting indirect artillery fire, Special Forces and their fire support officer learned it could pinpoint improvised explosive device (IED) explosions and small arms/rocket-propelled grenade (RPG) fires. It detected Points of Origin (POO) up to 10 kilometers from the sensor.

Analyzing the UTAMS and radar logs revealed several patterns. The opposing force was firing 60mm mortars during observed dining hours, presumably since that gave the largest groupings of personnel and the best chance of producing heavy casualties. That would have been obvious from the impact history alone, but these MASINT sensors established a pattern of the enemy firing locations.

This allowed the US forces to move mortars into range of the firing positions, give coordinates to cannon when the mortars were otherwise committed, and to use attack helicopters as a backup to both. The opponents changed to night fires, which, again, were countered with mortar, artillery, and helicopter fires. They then moved into an urban area where US artillery was not allowed to fire, but a combination of PSYOPS leaflet drops and deliberate near misses convinced the locals not to give sanctuary to the mortar crews.

Originally for a Marine requirement in Afghanistan, UTAMS was combined with electro-optical MASINT to produce the Rocket Launch Spotter (RLS) system useful against both rockets and mortars.

In the Rocket Launch Spotter (RLS) applicationcitation
url =
title = Rocket Artillery Launch Spotter (RLS)
author = Mabe, R.M. "et al."
accessdate = 2007-12-01
] , each array consists of four microphones and processing equipment. Analyzing the time delays between an acoustic wavefront’s interaction with each microphone in the array UTAMS provides an azimuth of origin. The azimuth from each tower is reported to the UTAMS processor at the control station, and a POO is triangulated and displayed. The UTAMS subsystem can also detect and locate the point of impact (POI), but, due to the difference between the speeds of sound and light, it may take UTAMS as long as 30 seconds to determine the POO for a rocket launch 13 km away. In this application, the electro-optical component of RLS will detect the rocket POO earlier, while UTAMS may do better with the mortar prediction.

Passive sea-based acoustic sensors (hydrophones)

Modern hydrophones convert sound to electrical energy, which then can undergo additional signal processing, or that can be transmitted immediately to a receiving station. They may be directional or omnidirectional.

Navies use a variety of acoustic systems, especially passive, in antisubmarine warfare, both tactical and strategic. For tactical use, passive hydrophones, both on ships and airdropped sonobuoys, are used extensively in antisubmarine warfare. They can detect targets far further away than with active sonar, but generally will not have the precision location of active sonar, approximating it with a technique called Target Motion Analysis (TMA). Passive sonar has the advantage of not revealing the position of the sensor.

The Integrated Undersea Surveillance System (IUSS) consists of multiple subsystems in SOSUS, Fixed Distributed System (FDS), and the Advanced Deployable System (ADS or SURTASS). Reducing the emphasis on Cold War blue-water operations put SOSUS, with more flexible "tuna boat" sensing vessels called SURTASS being the primary blue-water long-range sensorscite web
first = John
last = Pike
authorlink = John E. Pike
title = AN/UQQ-2 Surveillance Towed-Array Sensor System (SURTASS)
publisher =
date = 9 April 2002
url =
accessdate = 2007-10-05
] SURTASS used longer, more sensitive towed passive acoustic arrays than could be deployed from maneuvering vessels, such as submarines and destroyers.

SURTASS is now being complemented by Low Frequency Active (LFA) sonar; see the sonar section.

Air-dropped passive acoustic sensors

Passive sonobuoys, such as the AN/SSQ-53F, can be directional or omnidirectional and can be set to sink to a specific depth. These would be dropped from helicopters and maritime patrol aircraft such as the P-3.

Fixed underwater passive acoustic sensors

The US installed massive Fixed Surveillance System (FSS, also known as SOSUS) hydrophone arrays on the ocean floor, to track Soviet and other submarinescite web
first = John
last = Pike
authorlink = John E. Pike
title = Sound Surveillance System (SOSUS)
publisher =
date = 9 April 2002
url =
accessdate = 2007-10-05
] .

Surface ship passive acoustic sensors

Purely from the standpoint of detection, towed hydrophone arrays offer a long baseline and exceptional measurement capability. Towed arrays, however, are not always feasible, because when deployed, their performance can suffer, or they can suffer outright damage, from fast speeds or radical turns. A state-of-the-art British towed array, with both passive and active capabilities, is Sonar 2087 made by Thales Underwater Systems.

Steerable sonar arrays on the hull or bow usually have a passive as well as active mode, as do variable-depth sonars

Surface ships may have warning receivers to detect hostile sonar.

Submarine passive acoustic sensors

Modern submarines have multiple passive hydrophone systems, such as a steerable array in a bow dome, fixed sensors along the sides of the submarines, and towed arrays. They also have specialized acoustic receivers, analogous to radar warning receivers, to alert the crew to the use of active sonar against their submarine.

US submarines made extensive clandestine patrols to measure the signatures of Soviet submarines and surface vessels cite book
last = Sontag
first = Sherry
authorlink =
coauthors = Christopher Drew, Annette Lawrence Drew
title = Blind Man's Bluff: The Untold Story of American Submarine Espionage
publisher = Harper Torch
date = 1999
url =
id = Sontag 1999
isbn = 006103004X
] . This acoustic MASINT mission included both routine patrols of attack submarines, and submarines sent to capture the signature of a specific vessel. US antisubmarine technicians on air, surface, and subsurface platforms had extensive libraries of vessel acoustic signatures.

Passive acoustic sensors can detect aircraft flying low over the sea.cite web
first = John W.
last = Ives
title = Army Vision 2010: Integrating Measurement and Signature Intelligence
publisher = US Army War College
date = 9 April 2002
url =
accessdate = 2007-10-03

Land-based Passive Acoustic Sensors (geophones)

Vietnam-era acoustic MASINT sensors included "Acoubuoy (36 inches long, 26 pounds) floated down by camouflaged parachute and caught in the trees, where it hung to listen. The Spikebuoy (66 inches long, 40 pounds) planted itself in the ground like a lawn dart. Only the antenna, which looked like the stalks of weeds, was left showing above ground." Citation
Author = John T. Correll
journal = Air Force Magazine
date = November 2004
title = Igloo White
volume = 87
issue = 11
url =
] This was part of Operation Igloo White.

Part of the AN/GSQ-187 Improved Remote Battlefield Sensor System (I-REMBASS) is a passive acoustic sensor, which, with other MASINT sensors, detects vehicles and personnel on a battlefield citation
last= CACI
title = AN/GSQ-187 Improved Remote Battlefield Sensor System (I-REMBASS)
date = 09 April 2002
url =
accessdate = 2007-10-15
] . Passive acoustic sensors provide additional measurements that can be compared with signatures, and used to complement other sensors. I-REMBASS control will integrate, in approximately 2008, with the .

For example, a ground search radar may not be able to differentiate between a tank and a truck moving at the same speed. Adding acoustic information, however, may quickly distinguish between them.

Active Acoustic Sensors and Supporting Measurements

Combatant vessels, of course, made extensive use of active sonar, which is yet another acoustic MASINT sensor. Besides the obvious application in antisubmarine warfare, specialized active acoustic systems have roles in::*Mapping the seafloor for navigation and collision avoidance. These include basic depth gauges, but quickly get into devices that do 3-dimensional underwater mapping:*Determining seafloor characteristics, for applications varying from understanding its sound-reflecting properties, to predicting the type of marine life that may be found there, to knowing when a surface is appropriate for anchoring or for using various equipment that will contact the seafloor

Various synthetic aperture sonars have been built in the laboratory and some have entered use in mine-hunting and search systems. An explanation of their operation is given in synthetic aperture sonar.

Water Surface, Fish Interference and Bottom Characterization

The water surface and bottom are reflecting and scattering boundaries. Large schools of fish, with air in their swim bladder balance apparatus, can also have a significant effect on acoustic propagation.

For many purposes, but not all naval tactical applications, the sea-air surface can be thought of as a perfect reflector. "The effects of the seafloor and the sea surface on acoustic systems in shallow water are highly complex, making range predictions difficult. Multi-path degradation affects overall figure of merit and active classification. As a result, false target identifications are frequent."

The acoustic impedance mismatch between water and the bottom is generally much less than at the surface and is more complex. It depends on the bottom material types and depth of the layers. Theories have been developed for predicting the sound propagation in the bottom in this case, for example by Biot [N Chotiros, Biot Model of Sound Propagation in Water Saturated Sand. J. Acoust. Soc. Am. 97, 199 (1995) ] and by Buckingham. [citation
author = Buckingham, M. J.
title = Wave propagation, stress relaxation, and grain-to-grain shearing in saturated, unconsolidated marine sediments
journal = Journal of the Acoustical Society of America
volume = 108
pages = 2796-2815
year= 2000
] .

Water Surface

For high frequency sonars (above about 1 kHz) or when the sea is rough, some of the incident sound is scattered, and this is taken into account by assigning a reflection coefficient whose magnitude is less than one.

Rather than measuring surface effects directly from a ship, radar MASINT, in aircraft or satellites, may give better measurements. These measurements would then be transmitted to the vessel's acoustic signal processor.

Under Ice

A surface covered with ice, of course, is tremendously difference than even storm-driven water. Purely from a collision avoidance and acoustic propagation, a submarine needs to know how close it is to the bottom of ice. [cite web
author = Richard Shell
coauthors = Garner Bishop and Douglas Maxwell
title = Under-Ice Sonar Visualization
journal = Linux Journal
url =
ID = Underice
accessdate = 2007-10-18
] . Less obvious is the need to know the three-dimensional structure of the ice, because submarines may need to break through it to launch missiles, to raise4 electronic masts, or to surface the boat. Three-dimensional ice information also can tell the submarine captain whether antisubmarine warfare aircraft can detect or attack the boat.

The state of the art is providing the submarine with a three-dimensional visualization of the ice above: the lowest part (ice keel) and the ice canopy. While sound will propagate differently in ice than liquid water, the ice still needs to be considered as a volume, to understand the nature of reverberations within it.


A typical basic depth measuring device is the US AN/UQN-4A. Both the water surface and bottom are reflecting and scattering boundaries. For many purposes, but not all naval tactical applications, the sea-air surface can be thought of as a perfect reflector. In reality, there are complex interactions of water surface activity, seafloor characteristics, water temperature and salinity, and other factors that make "...range predictions difficult. Multi-path degradation affects overall figure of merit and active classification. As a result, false target identifications are frequent."

This device, however, does not give information on the characteristics of the bottom. In many respects, commercial fishing and marine scientists have equipment that is perceived as needed for shallow water operation.

Biologic Effects on Sonar Reflection

A further complication is the presence of wind generated bubbles or fish close to the sea surface. citation
author = Weston, DE
coauthor = P. A. Ching
title = Wind effects in shallow-water transmission
journal = J. Acoust. Soc. Am.
volume = 86
pages = 1530-1545
year =1989
] . The bubbles can also form plumes that absorb some of the incident and scattered sound, and scatter some of the sound themselves. [citation
author = Norton, G.V.
coauthor = J. C. Novarini
title = On the relative role of sea-surface roughness and bubble plumes in shallow-water propagation in the low-kilohertz region
journal = J. Acoust. Soc. Am.
volume = 110
pages = 2946-2955
year = 2001
] .

This problem is distinct from biologic interference caused by acoustic energy generated by marine life, such as the squeaks of porpoises and other cetaceans, and measured by acoustic receivers. The signatures of biologic sound generators need to be differentiated from more deadly denizens of the depths. Classifying biologics is a very good example of an acoustic MASINT process.

urface Combatants

Modern surface combatants with an ASW mission will have a variety of active systems, with a hull- or bow-mounted array, protected from water by a rubber dome; a "variable-depth" dipping sonar on a cable, and, especially on smaller vessels, a fixed acoustic generator and receiver.

Some, but not all, vessels carry passive towed arrays, or combined active-passive arrays. These depend on target noise, which, in the combined littoral environment of ultraquiet submarines in the presence of much ambient noise. Vessels that have deployed towed arrays cannot make radical course maneuvers. Especially when active capabilities are included, the array can be treated as a bistatic or multistatic sensor, and act as a synthetic aperture sonar (SAS)

For ships that cooperate with aircraft, they will need a data link to sonobuoys and a sonobuoy signal processor, unless the aircraft has extensive processing capability and can send information that can be accepted directly by tactical computers and displays.

Signal processors not only analyze the signals, but constantly track propagation conditions. The former is usually considered part of a particular sonar, but the US Navy has a separate propagation predictor called the AN/UYQ-25B(V) Sonar "in situ" Mode Assessment System (SIMAS) Echo Tracker Classifiers (ETC) are adjuncts, with a clear MASINT flavor, to existing surface ship sonars [cite web
last = Dynamics Technology, Inc.
title = Synthetic Aperture Sonar for Enhanced Classification
id = ETC
url =
accessdate = 2007-10-18
] . ETC is an application of synthetic aperture sonar (SAS). SAS is already used for minehunting, but could help existing surface combatants, as well as future vessels and unmanned surface vehicles (USV), detect threats, such as very silent air-independent propulsion non-nuclear submarines, outside torpedo range. Torpedo range, especially in shallow water, is considered anything greater than 10 nmi.

Conventional active sonar may be more effective than towed arrays, but the small size of modern littoral submarines makes them difficult threats. Highly variable bottom paths, biologics, and other factors complicate sonar detection. If the target is slow-moving or waiting on the bottom, they have little or no Doppler effect, which current sonars use to recognize threats.

Continual active tracking measurement of all acoustically detected objects, with recognition of signatures as deviations from ambient noise, still gives a high false alarm rate (FAR) with conventional sonar. SAS processing, however, improves the resolution, especially of azimuth measurements, by assembling the data from multiple pings into a synthetic beam that gives the effect of a far larger receiver.

MASINT-oriented SAS measures shape characteristics and eliminates acoustically detected objects that do not conform to the signature of threats. Shape recognition is only one of the parts of the signature, which include course and Doppler when available.

Air-Dropped Active Sonobuoys

Active sonobuoys, containing a sonar transmitter and receiver, can be dropped from fixed-wing maritime patrol aircraft (e.g., P-3, Nimrod, Chinese Y-8, Russian and Indian Bear ASW variants), antisubmarine helicopters, and carrier-based antisubmarine aircraft (e.g., S-3). While there have been some efforts to use other aircraft simply as carriers of sonobuoys, the general assumption is that the sonobuoy-carrying aircraft can issue commands to the sonobuoys and receive, and to some extent process, their signals.

The Directional Hydrophone Command Activated Sonobuoy system (DICASS) both generate sound and listen for it. A typical modern active sonobuoy, such as the AN/SSQ 963D, generates multiple acoustic frequencies cite web
last = Ultra Electronics
title = Catalog
url =
accessdate = 2007-10-15
] . Other active sonobuoys, such as the AN/SSQ 110B, generate small explosions as acoustic energy sources.

Airborne Dipping Sonar

Antisubmarine helicopters can carry a "dipping" sonar head at the end of a cable, which the helicopter can raise from or lower into the water. The helicopter would typically dip the sonar when trying to localize a target submarine, usually in cooperation with other ASW platforms or with sonobuoys. Typically, the helicopter would raise the head after dropping an ASW weapon, to avoid damaging the sensitive receiver. Not all variants of the same basic helicopter, even assigned to ASW, carry dipping sonar; some may trade the weight of the sonar for more sonobuoy or weapon capacity.

The EH101 helicopter, used by a number of nations, has a variety of dipping sonars. The (British) Royal Navy version has Ferranti/Thomson-CSF sonar, while the Italian version uses the HELRAS. Russian Ka-25 helicopters carry dipping sonar, as does the US LAMPS SH-60 helicopter, which carries a "dipping" AQS-13F sonar, plus AN/SQQ-28(V)10 sonar signal processing for active sonobuoys it drops.

urveillance Vessel Low-Frequency Active

Newer Low-Frequency Active (LFA) systems are controversial, as their very high sound pressures may be hazardous to whales and other marine life [cite web
last = National Resources Defense Council
author-link = Natural Resources Defense Council
title = Protecting Whales from Dangerous Sonar
year = 2005
url =
accessdate = 2007-10-05
] . A decision has been made to employ LFA on SURTASS vessels, after an environmental impact statement that indicated, if LFA is used with decreased power levels in certain high-risk areas for marine life, it would be safe when employed from a moving ship. The ship motion, and the variability of the LFA signal, would limit the exposure to individual sea animals [cite web
last = Chief of Naval Operations
title = Record of Decision for Surveillance Towed Array Sensor System Low Frequency Active (SURTASS LFA) SONAR Supplemental Environmental Impact Statement
id = LFA2007
date = August 2007
url =
accessdate = 2007-10-15
] . LFA operates in the low-frequency (LF) acoustic band of 100-500 Hz. It has an active component, the LFA proper, and the passive SURTASS hydrophone array. "The active component of the system, LFA, is a set of 18 LF acoustic transmitting source elements (called projectors) suspended by cable from underneath an oceanographic surveillance vessel, such as the Research Vessel (R/V) Cory Chouest, USNS Impeccable (T-AGOS 23), and the Victorious class (TAGOS 19 class).

"The source level of an individual projector is 215 dB. These projectors produce the active sonar signal or “ping.” A "ping," or transmission, can last between 6 and 100 seconds. The time between transmissions is typically 6 to 15 minutes with an average transmission of 60 seconds. Average duty cycle (ratio of sound “on” time to total time) is less than 20 percent. The typical duty cycle, based on historical LFA operational parameters (2003 to 2007), is normally 7.5 to 10 percent."

This signal " not a continuous tone, but rather a transmission of waveforms that vary in frequency and duration. The duration of each continuous frequency sound transmission is normally 10 seconds or less. The signals are loud at the source, but levels diminish rapidly over the first kilometer."

ubmarine Active Acoustic Sensors

The primary tactical active sonar of a submarine is usually in the bow, covered with a protective dome. Submarines for blue-water operations used active systems such as the AN/SQS-26 and AN/SQS-53 have been developed but were generally designed for convergence zone and single bottom bounce environments.

Submarines that operate in the Arctic also have specialized sonar for under-ice operation; think of an upside-down fathometer.

Submarines also may have minehunting sonar. Using measurements to differentiate between biologic signatures and signatures of objects that will permanently sink the submarine is as critical a MASINT application as could be imagined.

Active Acoustic Sensors for Minehunting

Sonars optimized to detect objects of the size and shapes of mines can be carried by submarines, remotely operated vehicles, surface vessels (often on a boom or cable) and specialized helicopters.

The classic emphasis on minesweeping, and detonating the mine released from its tether using gunfire, has been replaced with the AN/SLQ-48(V)2 mine neutralization system (MNS)AN/SLQ-48 - (remotely operated) Mine Neutralization Vehicle. This works well for rendering save mines in deep water, by placing explosive charges on the mine and/or its tether. The AN/SLQ-48 is not well suited to the neutralization of shallow-water mines. The vehicle tends to be underpowered and may leave on the bottom a mine that looks like a mine to any subsequent sonar search and an explosive charge subject to later detonation under proper impact conditions.

There is mine-hunting sonar, as well as (electro-optical) television on the ROV, and AN/SQQ-32 minehunting sonar on the ship.

Acoustic sensing of large explosions

An assortment of time-synchronized sensors can characterize conventional or nuclear explosions. One pilot study, the Active Radio Interferometer for Explosion Surveillance (ARIES). This technique implements an operational system for monitoring ionospheric pressure waves resulting from surface or atmospheric nuclear or chemical explosives. Explosions produce pressure waves that can be detected by measuring phase variations between signals generated by ground stations along two different paths to a satellite. This is a very modernized version, on a larger scale, of WWI sound ranging.

As can many sensors, ARIES can be used for additional purposes. Collaborations are being pursued with the Space Forecast Center to use ARIES data for total electron content measures on a global scale, and with the meteorology/global environment community to monitor global climate change (via tropospheric water vapor content measurements), and by the general ionospheric physics community to study travelling ionospheric disturbances [ cite web
last = Pike
first = John
title = Active Radio Interferometer for Explosion Surveillance (ARIES)
publisher =
url =
id = PikeAries
accessdate = 2007-10-03
] .

Sensors relatively close to a nuclear event, or a high-explosive test simulating a nuclear event, can detect, using acoustic methods, the pressure produced by the blast. These include infrasound microbarographs (acoustic pressure sensors) that detect very low-frequency sound waves in the atmosphere produced by natural and man-made events.

Closely related to the microbarographs, but detecting pressure waves in water, are hydro-acoustic sensors, both underwater microphones and specialized seismic sensors that detect the motion of islands.

eismic MASINT

US Army Field Manual 2-0 defines seismic intelligence as "The passive collection and measurement of seismic waves or vibrations in the earth surface." One strategic application of seismic intelligence makes use of the science of seismology to locate and characterize nuclear testing, especially underground testing. Seismic sensors also can characterize large conventional explosions that are used in testing the high-explosive components of nuclear weapons. Seismic intelligence also can help locate such things as large underground construction projects.

Since many areas of the world have a great deal of natural seismic activity, seismic MASINT is one of the emphatic arguments that there must be a long-term commitment to measuring, even during peacetime, so that the signatures of natural behavior is known before it is necessary to search for variations from signatures.

Strategic Seismic MASINT

For nuclear test detection, seismic intelligence is limited by the "threshold principle" coined in 1960 by George Kistiakowsky, which recognized that while detection technology would continue to improve, there would be a threshold below which small explosions could not be detected. [Citation
contribution = Space Policy Project (summary of Foreign Relations of the US, text not online)
year = 1961
title = Foreign Relations of the United States 1958-1960
volume = National Security Policy; Arms Control and Disarmament, Volume III
place= Washington, DC
publisher = US Department of State (summary by Federation of American Scientists)
url =
id = FRUS58
] .

Tactical Seismic MASINT

The most common sensor in the Vietnam-era "McNamara Line" of remote sensors was the ADSID (Air-Delivered Seismic Intrusion Detector) sensed earth motion to detect people and vehicles. It resembled the Spikebuoy, except it was smaller and lighter (31 inches long, 25 pounds). The challenge for the seismic sensors (and for the analysts) was not so much in detecting the people and the trucks as it was in separating out the false alarms generated by wind, thunder, rain, earth tremors, and animals—especially frogs."

Vibration MASINT

This subdiscipline is also called piezoelectric MASINT after the sensor most often used to sense vibration, but vibration detectors need not be piezoelectric. Note that some discussions treat seismic and vibration sensors as a subset of acoustic MASINT. Other possible detectors could be moving coil or surface acoustic wave. [cite web
title = Investigation into Non-Visual Surveillance Devices
author = Kumagai, Jason K.
coauthor = Lisa J. Massel
url =
accessdate = 2007-12-02
] . Vibration, as a form of geophysical energy to be sensed, has similarities to acoustic and seismic MASINT, but also has distinct differences that make it useful, especially in unattended ground sensors (UGS). In the UGS application, one advantage of a piezoelectric sensor is that it generates electricity when triggered, rather than consuming electricity, an important consideration for remote sensors whose lifetime may be determined by their battery capacity.

While acoustic signals at sea travel through water, on land, they can be assumed to come through the air. Vibration, however, is conducted through a solid medium on land. It has a higher frequency than is typical of seismic conducted signals.

A typical detector, the Thales MA2772 vibration is a piezoelectric cable, shallowly buried below the ground surface, and extended for 750 meters. Two variants are available, a high-sensitivity version for personnel detection, and lower-sensitivity version to detect vehicles. Using two or more sensors will determine the direction of travel, from the sequence in which the sensors trigger.

In addition to being buried, piezoelectric vibration detectors, in a cable form factor, also are used as part of high-security fencing [cite web
url =
title = Copperhead Fiber SenSys Perimeter Fence Security
] . They can be embedded in walls or other structures that need protection.

Magnetic MASINT

A magnetometer is a scientific instrument used to measure the strength and/or direction of the magnetic field in the vicinity of the instrument. The measurements they make can be compared to signatures of vehicles on land, submarines underwater, and atmospheric radio propagation conditions. They come in two basic types:
*scalar magnetometers measure the total strength of the magnetic field to which they are subjected, and
*vector magnetometers have the capability to measure the component of the magnetic field in a particular direction.

Earth's magnetism varies from place to place and differences in the Earth's magnetic field (the magnetosphere) can be caused by two things:

:*the differing nature of rocks:*the interaction between charged particles from the sun and the magnetosphere

Metal detectors use electromagnetic induction to detect metal. They can also determine the changes in existing magnetic fields caused by metallic objects.

Indicating Loops for detecting Submarines

One of the first means for detecting submerged submarines, first installed by the Royal Navy in 1914, was the effect of their passage over an anti-submarine indicator loop on the bottom of a body of water. A metal object passing over it, such as a submarine, will, even if degaussed, have enough magnetic properties to induce a current in the loop's cable. . [cite web
author = Richard Walding
title = What are Indicator Loops and how do they work?
url =
id = Walding
accessdate = 2007-10-16
] In this case, the motion of the metal submarine across the indicating coil acts as an oscillator, producing electrical current.


A magnetic anomaly detector (MAD) is an instrument used to detect minute variations in the Earth's magnetic field. The term refers specifically to magnetometers used either by military forces to detect submarines (a mass of ferromagnetic material creates a detectable disturbance in the magnetic field)Magnetic anomaly detectors were first employed to detect submarines during World War II. MAD gear was used by both Japanese and U.S. anti-submarine forces, either towed by ship or mounted in aircraft to detect shallow submerged enemy submarines. After the war, the U.S. Navy continued to develop MAD gear as a parallel development with sonar detection technologies.

To reduce interference from electrical equipment or metal in the fuselage of the aircraft, the MAD sensor is placed at the end of a boom or a towed aerodynamic device. Even so, the submarine must be very near the aircraft's position and close to the sea surface for detection of the change or anomaly. The detection range is normally related to the distance between the sensor and the submarine. The size of the submarine and its hull composition determine the detection range. MAD devices are usually mounted on aircraft s.

There is some misunderstanding of the mechanism of detection of submarines in water using the MAD boom system. Magnetic moment displacement is ostensibly the main disturbance, yet submarines are detectable even when oriented parallel to the earth's magnetic field, despite construction with non-ferromagnetic hulls.

For example, the Soviet-Russian Alfa class submarine, was constructed out of titanium. This light, strong material, as well as a unique nuclear power system, allowed the submarine to break speed and depth records for operational boats. It was thought that nonferrous titanium would defeat magnetic ASW sensors, but this was not the case. to give dramatic submerged performance and protection from detection by MAD sensors, is still detectable.

Since titanium structures are detectable, MAD sensors do not directly detect deviations in the earth's magnetic field. Instead, they may be described as long-range electric and electromagnetic field detector arrays of great sensitivity.

An electric field is set up in conductors experiencing a variation in physical environmental conditions, providing that they are contiguous and possess sufficient mass. Particularly in submarine hulls, there is a measurable temperature difference between the bottom and top of the hull producing a related salinity difference, as salinity is affected by temperature of water. The difference in salinity creates an electric potential across the hull. An electric current then flows through the hull, between the laminae of sea-water separated by depth and temperature. The resulting dynamic electric field produces an electromagnetic field of its own, and thus even a titanium hull will be detectable on a MAD scope, as will a surface ship for the same reason.

Vehicle Detectors

The Remotely Emplaced Battlefield Surveillance System (REMBASS) is a US Army program for detecting the presence, speed, and direction of a ferrous object, such as a tank. Coupled with acoustic sensors that recognize the sound signature of a tank, it could offer high accuracy. It also collects weather information cite web
last = CACI
title = AN/GSQ-187 Improved Remote Battlefield Sensor System (I-REMBASS)
date = 2007
url =
accessdate = 2007-10-03
] .

The Army's AN/GSQ-187 Improved Remote Battlefield Sensor System (I-REMBASS) includes both magnetic-only and combined passive infrared/magnetic intrusion detectors. The DT-561/GSQ hand emplaced MAG "sensor detects vehicles (tracked or wheeled) and personnel carrying ferrous metal. It also provides information on which to base a count of objects passing through its detection zone and reports their direction of travel relative to its location. The monitor uses two different (MAG and IR) sensors and their identification codes to determine direction of travel.

Magnetic detonators and countermeasures

Magnetic sensors, much more sophisticated than the early inductive loops, can trigger the explosion of mines or torpedoes. Early in WWII, the US tried to put magnetic torpedo exploder far beyond the limits of the technology of the time, and had to disable it, and then work on also-unreliable contact fuzing, to make torpedoes more than blunt objects than banged into hulls.

Since water is incompressible, an explosion under the keel of a vessel is far more destructive than one at the air-water interface. Torpedo and mine designers want to place the explosions in that vulnerable spot, and countermeasures designers want to hide the magnetic signature of a vessel. Signature is especially relevant here, as mines may be made selective for warships, merchant vessel unlikely to be hardened against underwater explosions, or submarines.

A basic countermeasure, started in WWII, was degaussing, but it is impossible to remove all magnetic properties.

Detecting landmines

Landmines often contain enough ferrous metal to be detectable with appropriate magnetic sensors. Sophisticated mines, however, may also sense a metal-detection oscillator, and, under preprogrammed conditions, detonate to deter demining personnel.

Not all landmines have enough metal to activate a magnetic detector. While, unfortunately, the greatest number of unmapped minefields are in parts of the world that cannot afford high technology, a variety of MASINT sensors could help demining. These would include ground-mapping radar, thermal and multispectral imaging, and perhaps synthetic aperture radar to detect disturbed soil.

Gravitimetric MASINT

While high school physics students are told that the value of gravity is 9.8 meters per second squared, they also learn Newton's equation that predicts that gravity is a function of mass. Given sufficiently sensitive instrumentation, it is possible to detect variations in gravity from the different densities of natural materials: the value of gravity will be greater on top of a granite monolith than over a sand beach. Again with sufficiently sensitive instrumentation, it should be possible to detect gravitational differences between solid rock, and rock excavated for a hidden facility.

Streland 2003 points out that the instrumentation indeed must be sensitive: variations of the force of gravity on the earth’s surface are on the order of 106 of the average value. A practical gravitimetric detector of buried facilities would need to be able to measure "less than one one millionth of the force that caused the apple to fall on Sir Isaac Newton’s head." To be practical, it would be necessary for the sensor to be able to be used while in motion, measuring the change in gravity between locations. This change over distance is called the "gravity gradient", which can be measured with a gravity gradiometer.

Developing an operationally useful gravity gradiometer is a major technical challenge. One type, the SQUID Superconducting Quantum Interference Device gradiometer, may have adequate sensitivity, but it needs extreme cryogenic cooling, even if in space, a logistic nightmare. Another technique, far more operationally practical but lacking the necessary sensitivity, is the Gravity Recovery and Climate Experiment (GRACE) technique, currently using radar to measure the distance between pairs of satellites, whose orbits will change based on gravity. Substituting lasers for radar will make GRACE more sensitive, but probably not sensitive enough.

A more promising technique, although still in the laboratory, is quantum gradiometry, which is an extension of atomic clock techniques, much like those in GPS. Off-the-shelf atomic clocks measure changes in atomic waves over time rather than the spatial changes measured in a quantum gravity gradiometer. One advantage of using GRACE in satellites is that measurements can be made from a number of points over time, with a resulting improvement as seen in synthetic aperture radar and sonar. Still, finding deeply buried structures of human scale is a tougher problem than the initial goals of finding mineral deposits and ocean currents.

To make this operationally feasible, there would have to be a launcher to put fairly heavy satellites into polar orbits, and as many earth stations as possible to reduce the need for large on-board storage of the large amounts of data the sensors will produce. Finally, there needs to be a way to convert the measurements into a form that can be compared against available signatures in geodetic data bases. Those data bases would need significant improvement, from measured data, to become sufficiently precise that a buried facility signature would stand out.


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Materials MASINT — Intelligence Cycle Management Collection Management MASINT Electro optical MASINT Nuclear MASINT Geophysical MASINT Radar MASINT Materials MASINT Radiofrequency MASINT Materials MASINT is one of the six major disciplines generally accepted to… …   Wikipedia

  • Nuclear MASINT — Intelligence Cycle Management Collection Management MASINT Electro optical MASINT Nuclear MASINT Geophysical MASINT Radar MASINT Materials MASINT Radiofrequency MASINT Nuclear MASINT is one of the six major subdisciplines generally accepted to… …   Wikipedia

  • Radiofrequency MASINT — is one of the six major disciplines generally accepted to make up the field of Measurement and Signature Intelligence (MASINT), with due regard that the MASINT subdisciplines may overlap, and MASINT, in turn, is complementary to more traditional… …   Wikipedia

  • Electro-optical MASINT — is a subdiscipline of Measurement and Signature Intelligence, (MASINT) and refers to intelligence gathering activities which bring together disparate elements that do not fit within the definitions of Signals Intelligence (SIGINT), Imagery… …   Wikipedia

  • Radar MASINT — is one of the subdisciplines of Measurement and Signature Intelligence (MASINT) and refers to intelligence gathering activities that bring together disparate elements that do not fit within the definitions of Signals Intelligence (SIGINT),… …   Wikipedia

  • Measurement and Signature Intelligence — Measurement and Signature Intelligence, or MASINT, refers to intelligence gathering activities that bring together disparate elements that do not fit within the definitions of the major disciplines mentioned above. As a means of collecting… …   Wikipedia

  • Measurement and signature intelligence — (MASINT) is a branch of intelligence gathering activities. MASINT, may have aspects of intelligence analysis management, since certain aspects of MASINT, such as the analysis of electromagnetic radiation received by signals intelligence are more… …   Wikipedia

  • List of intelligence gathering disciplines — Intelligence Gathering DisciplinesHUMINTHuman Intelligence gathered from a person on the ground. *Espionage. * Friendly accredited diplomats * Military attaches * Patrolling (Military police, patrols, etc) *Non governmental organizations (NGOs) * …   Wikipedia

  • Special reconnaissance — This article is a subset article under Human Intelligence. For a complete hierarchical list of articles, see the intelligence cycle management hierarchy. Special Reconnaissance (SR) is conducted by small units of highly trained military personnel …   Wikipedia

  • Casualty estimation — is the process of estimating the number of injuries or deaths in a battle or natural disaster that has already occurred. (Casualty prediction is the process of estimating the number of injuries or deaths that might occur in a planned or potential …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”