Insulated shipping container

Insulated shipping container

Insulated shipping containers are a type of packaging used to ship temperature sensitive products such as foods, pharmaceuticals, and chemicals. They are used as part of a cold chain to help maintain product freshness and efficacy.

Construction

An insulated shipping container might be constructed of:
# a vacuum flask, similar to a "thermos" bottle
# fabricated thermal blankets or liners
# molded expanded polystyrene foam (EPS, styrofoam, etc), similar to a cooler
# other molded foams such as polyurethane, polyethylene, etc
# sheets of foamed plastics
# reflective materials: (metallised film, etc)
# bubble wrap or other gas filled panels
# other packaging materials and structures

Some are designed for single use while others are returnable for reuse. Some empty containers are sent to the shipper disassembled or “knocked down”, assembled and used, then knocked down again for easier return shipment.

Use

Insulated shipping containers are part of a comprehensive cold chain which controls and documents the temperature of a product through its entire distribution cycle. The containers may be used with a refrigerant or coolant such as:
* water ice
* dry ice
* Gel packs (often formulated for specific temperature ranges)
* Some products (such as frozen meat) have sufficient thermal mass to contribute to the temperature control
* etc

A temperature data logger is often enclosed to monitor the temperature inside the container for its entire shipment.

Labels and appropriate documentation (internal and external) are usually required.

Personnel throughout the cold chain need to be aware of the special handling and documentation required for some controlled shipments. With some regulated products, complete documentation is required.

Design and Evaluation

The use of “off the shelf” insulated shipping containers does not necessarily guarantee proper performance. Several factors need to be considered:
* the sensitivity of the product to temperatures (high and low) and to time at temperatures
* the specific distribution system being used: the expected (and worst case) time and temperatures
* regulatory requirements
* the specific combination of packaging components and materials being used
* etc

In specifying an insultated shipping container, the two primary characteristics of the material will be the insulation properties of the matieral known as the "K Value" and the thickness of the material. These two attributies determine that majority of the functionality of the component. One should attempt to control the latent heat of any insultated shipping container when is use, as this will affect the overall performance of the component when integrated into a system (closed system with refrigerant & product).

It is wise (and sometimes mandatory) to have formal verification of the performance of the insulated shipping container. Laboratory performance testing might include ASTM D3103-07, Standard Test Method for Thermal Insulation Performance of Packages, ISTA Guide 5B: Focused Simulation Guide for Thermal Performance Testing of Temperature Controlled Transport Packaging, and others. In addition, validation of field performance is extremely useful.

Specialists in design and testing of packaging for temperature sensitive products are often needed. These may be consultants, independent laboratories, universities, or reputable vendors.

ee also

*Validation (drug manufacture)
*Verification and Validation
*packaging engineering
*shelf life
*Temperature measurement
*Thermal insulation

External links and resources

*"Cold Chain Management", 2003, 2006, [http://www.iaph.uni-bonn.de/coldchain]
* Brody, A. L., and Marsh, K, S., "Encyclopedia of Packaging Technology", John Wiley & Sons, 1997, ISBN 0-471-06397-5
* Lockhart, H., and Paine, F.A., "Packaging of Pharmaceuticals and Healthcare Products", 2006, Blackie, ISBN 0751401676


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Shipping container architecture — The Nomadic Museum is composed of 152 shipping containers. It was constructed to house a photography exhibit in New York City in 2005, was dismantled, and was reassembled in Santa Monica, California, USA in early 2006. Shipping container… …   Wikipedia

  • Container compression test — The container compression test measures the compressive strength of packages such as boxes, drums, and cans. It usually provides a plot of deformation vs compressive force. It is commonly used to evaluate shipping containers made of corrugated… …   Wikipedia

  • container — noun 1 box, bottle, etc. ADJECTIVE ▪ airtight, closed, sealed, waterproof (esp. AmE), watertight (esp. BrE) ▪ insulated ▪ empty …   Collocations dictionary

  • Container (Transport und Verkehr) — 40 Fuß Container Im Mannheimer Containerhafen …   Deutsch Wikipedia

  • Intermodal container — A 40 foot (12.19 m) long shipping container. Each of the eight corners has a simple twistlock fitting for stacking, locking and craning …   Wikipedia

  • Drum (container) — A standard, 55 US gallon / 44 Imperial gallon drum. A drum is a cylindrical container used for shipping bulk cargo. Drums can be made of steel, dense paperboard (commonly called a fiber drum), or plastics, and are generally used for the… …   Wikipedia

  • Closure (container) — For other uses, see Closure (disambiguation). An aluminum bottle with a threaded aluminum screw closure Closures are devices and techniques used to close or seal a bottle, jug, jar, tube, can, etc. Closures can be a cap, cover, lid, plug, etc.… …   Wikipedia

  • Chub (container) — One type of chub used for bulk sausaage A Chub is a type of container formed by a tube of flexible packaging material. The cylindrical p …   Wikipedia

  • Clamshell (container) — Raspberries in a plastic clamshell package Clamshell pack of screws …   Wikipedia

  • Cargo container — 40 Fuß Container Im Mannheimer Containerhafen …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”