- Racing shell
In watercraft, a racing shell (also referred to as just a fine boat (UK) or just shell) is an extremely narrow, and often disproportionately long, rowing boat specifically designed for racing or exercise. It is outfitted with long oars, outriggers to hold the oarlocks away from the boat, and sliding seats. The boat's long length and semicircular cross-section reduce drag to a minimum. This makes the boat both fast and unstable. It must be actively balanced by the rowers to avoid tipping. Being able to balance, or "set" the boat while putting maximum effort into the oars is therefore an essential skill of sport rowing.
The racing shell evolved from the simple working rowboat. Boats with longer hulls and narrower in beam were developed in the early 19th century specifically for team racing. These dedicated boats were the first boats that could be called racing shells, and they have since evolved into the highly specialized forms used today.
A narrower boat provides a sharper angle to the bow and a smaller cross-sectional area reducing drag and wave drag, and avoiding hull speed limitations at race speed. The first racing shells, while narrower than working rowboats, were limited by the width necessary to mount the oarlocks on the boat's sides ("gunwales"). By attaching riggers to the gunwales, the oarlocks could be placed farther out, two things happened: oars got much longer, providing more length to the strokes, and hulls got narrower, until they were as narrow as it was possible while still retain sufficient buoyancy and balance.
Originally made from lapstrake wood, shells are now almost always made from a composite material for strength and weight advantages. The first composite shells were made from a form of papier-mâché and became popular in the 1870s. Modern shells are usually made of carbon-fibre reinforced plastic in a honeycomb structure. They are manufactured by either cold laying up of the carbon, which is then left to set, or by using heat curing, which ensures that the carbon fibre composite is properly set. The best shells are characterized by their "stiffness", as the lack of flexing means none of the force exerted by the rower is wasted in twisting the boat.
A rower on a fixed seat is limited in the amount of power he can apply to the oars by the strength in his upper body and the distance he can pull the oars on each stroke. After riggers were added to the shell allowing the use of longer oars, rowers took advantage by taking longer strokes and using their legs during the stroke. At first, the athletes wore trousers with wear resistant leather bottoms covered in grease and the shells had concave, longitudinal seats. The athletes could then use their legs to slide along the seat, adding the power of their legs and letting them greatly lengthen the stroke. This eventually led to the modern sliding seat, mounted on rollers, which allows nearly frictionless movement of the rower's body.
The same advantages may be obtained by fixing the seat and mounting the outriggers on rollers. Now the athletes body mass remains stationary and the boat doesn't pitch bow to stern nearly as much. This improves the boat speed significantly. The disadvantage is that this arrangement may result in blisters on one's buttocks and in the risk of sliding off one's seat when exerting too much explosive force at the beginning of a race . In April 1877 Michael Davis of Portland Maine applied for a patent for a sliding rigger/foot-board with fixed seat. In 1981 the German Peter-Michael_Kolbe won the FISA World Championship using a sliding rigger. In August of 1983 FISA banned the use of the sliding-rigger, presumably because it was thought to be more costly than sliding-seat boats.
There are a large number of different types of boats. They are classified using:
- Number of rowers. In all forms of modern competition the number of rowers can be 1, 2, 4, or 8. Although they are very rare, boats for other numbers of rowers do exist (such as the 24 person Stämpfli Express). In the 19th century, there were often races with 6, 10 and 12 rowers per boat.
- Position of coxswain. Boats are either coxless, bow-coxed (also called bowloaders), or stern-coxed. In coxless ("straight") boats, a steersman is responsible for steering by either use of a mechanism connecting one of his shoes by wire to the rudder—the swiveling of the shoe turns the rudder, or by using a hand controlled string, called a tiller rope, which is parallel to the gunwhales or the boat, and controls the rudder in a similar fashion. Singles and doubles do not employ a rudder in competition; the oarsmen steer by increasing or decreasing pressure on one scull or the other. In competition, bow- and stern-coxed boats may race one another.
Although sculling and sweep boats are generally identical to each other (except having different riggers), they are referred to using different names:
- Sweep: straight pair (2-), coxed pair (2+), straight four (4-), coxed four (4+), eight (8+) (always coxed)
- Sculling: single (1x), double (2x), quad (4x), octuple (8x) (very rare in world class, and always coxed)
Category:Rowing equipment manufacturers
- ^ a b Miller, Bill (January 2000). "The Development Of Rowing Equipment". http://www.rowinghistory.net/Equipment.htm. Retrieved 2011-04-26.
- ^ Mallory, Peter (2010). "The Sport of Rowing". p. 1836. http://www.row2k.com/content/row2k12.pdf. Retrieved 2011-04-26.
- ^ Davis, Michael (1877-04-04). "Improvement in outrigger-boats (US patent 209,960)". http://www.google.com/patents?id=Oe9KAAAAEBAJ&printsec=drawing&zoom=4#v=onepage&q&f=false. Retrieved 2011-04-26.
- A history of paper boats, including the paper racing shell
- History of MIT Crew: Chapter 8, which covers the evolution of the rowing shell
Oared racing boats Fine Boats Sweep Fine Boats Sculling Traditional Boats Coastal and Ocean
Wikimedia Foundation. 2010.