Base cylinder

Base cylinder

The base cylinder corresponds to the base circle, and is the cylinder from which involute tooth surfaces are developed.1

Notes

1. "ANSI/AGMA 1012-G05", "Gear Nomenclature, Definition of Terms with Symbols".


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Base cylinder — Цилиндр основа (формный цилиндр глубокой печати до нанесения медной рубашки) …   Краткий толковый словарь по полиграфии

  • Cylinder-head-sector — Cylinder head sector, also known as CHS, was an early method for giving addresses to each physical block of data on a hard disk drive. In the case of floppy drives, for which the same exact diskette medium can be truly low level formatted to… …   Wikipedia

  • cylinder — [sil′ən dər] n. [Fr cylindre < L cylindrus < Gr kylindros < kylindein, to roll < IE base * (s)kel , to bend > CALCAR, COLON1] 1. Geom. a) in geometry, a solid figure consisting of two parallel bases in the form of congruent, closed …   English World dictionary

  • Cylinder (geometry) — A right circular cylinder A cylinder is one of the most basic curvilinear geometric shapes, the surface formed by the points at a fixed distance from a given line segment, the axis of the cylinder. The solid enclosed by this surface and by two… …   Wikipedia

  • Cylinder set — In mathematics, a cylinder set is the natural open set of a product topology. Cylinder sets are particularly useful in providing the base of the natural topology of the product of a countable number of copies of a set. If V is a finite set, then… …   Wikipedia

  • cylinder — cylinderlike, adj. /sil in deuhr/, n. 1. Geom. a surface or solid bounded by two parallel planes and generated by a straight line moving parallel to the given planes and tracing a curve bounded by the planes and lying in a plane perpendicular or… …   Universalium

  • cylinder axis — Axis Ax is, n.; pl. {Axes}. [L. axis axis, axle. See {Axle}.] A straight line, real or imaginary, passing through a body, on which it revolves, or may be supposed to revolve; a line passing through a body or system around which the parts are… …   The Collaborative International Dictionary of English

  • Base (geometry) — The base of any geometric figure is (for polygons) any side that you wish to measure from or, (for polyhedra), any face that you wish to measure from. Bases are most commonly used in geometric formulas for area and volume. It is most commonly… …   Wikipedia

  • base gasket — The gasket directly below the cylinder and between the cylinder and crankcase. Also called cylinder gasket …   Dictionary of automotive terms

  • Diving cylinder — Diving cylinders to be filled at a diving air compressor station …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”