- Cutaway (guitar)
-
Close-up of the Venetian-style cutaway of a vintage Epiphone Emperor hollow-body semi-acoustic (jazz-style) archtop guitar
In guitar construction, a cutaway is an indentation in the body of the instrument adjacent to the neck of the instrument, designed to allow easier access to the upper frets.
Some manufacturers denote instrument models with cutaway using the suffix C, such as the Gibson L5C or the Maton CW80C.
There are two main types of cutaways: Venetian and Florentine[1]. A Venetian cutaway has a rounded bout. A Florentine cutaway has a sharp bout. The picture shows a Venetian cutaway. (The terms probably originate with the Gibson Guitar Corporation and probably do not reflect historic instrument-making practices of Florence and Venice[2]). A less common third type is the squared-off cutaway used on the Selmer-Maccaferri guitar and some nylon-string guitars.
As well as the more common lower cutaway, many instruments have an upper cutaway, sometimes smaller than the lower one, or sometimes about the same size. This is mainly seen on electric guitars, as the reduction in body size resulting from a double cutaway would be detrimental to the sound quality of an acoustic guitar. Double cutaways allow the thumb as well as the fingers to move past the neck-body join. Symmetrical ones also facilitate left-handed use of right-handed instruments.
Instruments with only a lower cutaway are known as single cutaway instruments, and guitars with both are called "double cutaway." These terms are sometimes shortened to "single cut" (such as in the model name for a solidbody electric guitar called the "PRS Singlecut," produced by the Paul Reed Smith company) or "double cut." In some Gibson guitars, models with two cutaways are abbreviated with a "DC" after the name, such as in the Les Paul Studio DC, the Les Paul Standard DC, the Les Paul Special DC, and the Les Paul Junior DC. Since more single cut versions of these guitars are produced than the doublecut versions, if the model name of these guitars is not followed by "DC," "double cut," or "double cutaway," the assumed reference is to the single cutaway models.
Cutaway bodies are mainly of interest when discussing acoustic guitars and semi-acoustic guitars; virtually all solid body guitars either have at least one cutaway, or have a body shape (such as the flying V guitar) which does not intrude into the upper neck area
- ^ Mottola, R.M. (Fall 2009). "Parametric Models of Guitar Cutaways". American Lutherie (99): 60.
- ^ "Acoustic Guitar" Magazine FAQ
This article relating to guitars is a stub. You can help Wikipedia by expanding it.
