- Insulated-gate bipolar transistor
The insulated-gate bipolar transistor or IGBT is a three-terminal
power semiconductor device, noted for high efficiency and fast switching. It switches electric power in many modern appliances: electric cars, variable speed refrigerators, air-conditioners, and even stereo systems with digital amplifiers. Since it is designed to rapidly turn on and off, amplifiers that use it often synthesize complex waveforms with pulse width modulationand low-pass filters.
The IGBT combines the simple gate-drive characteristics of the MOSFETs with the high-current and low–saturation-voltage capability of bipolar transistors by combining an isolated-gate FET for the control input, and a bipolar power
transistoras a switch, in a single device. The IGBT is used in medium- to high-power applications such as switched-mode power supply, traction motorcontrol and induction heating. Large IGBT modules typically consist of many devices in parallel and can have very high current handling capabilities in the order of hundreds of ampswith blocking voltages of 6,000 V.
The IGBT is a fairly recent invention. The first-generation devices of the 1980s and early 1990s were relatively slow in switching, and prone to failure through such modes as
latchupand secondary breakdown. Second-generation devices were much improved, and the current third-generation ones are even better, with speed rivaling MOSFETs, and excellent ruggedness and tolerance of overloads [A.Nakagawa et al., "Safe operating area for 1200-V non-latch-up bipolar-mode MOSFETs", IEEE Trans. on Electron Devices, ED-34, pp.351-355(1987)] .
The extremely high pulse ratings of second- and third-generation devices also make them useful for generating large power pulses in areas like particle and
plasma physics, where they are starting to supersede older devices like thyratrons and triggered spark gaps.
Their high pulse ratings, and low prices on the surplus market, also make them attractive to the high-voltage hobbyist for generating large amounts of high-frequency power to drive experiments like
Availability of affordable, reliable IGBTs is a key enabler for
electric vehicles and hybrid cars. Toyota's second generation hybrid Priushas a 50 kW IGBT inverter controlling two AC motor/generators connected to the DC battery pack. [ [http://en.wikibooks.org/wiki/Toyota_Prius/How_it_works Wikibooks] , Toyota Prius, How it works]
The IGBT is a semiconductor device with four alternating layers (P-N-P-N) that are controlled by a metal-oxide-semiconductor (MOS) gate structure without regenerative action. This mode of operation was first proposed by Yamagami in his Japanese patent S47-21739, which was filed in 1968 [ [http://www4.ipdl.inpit.go.jp/Tokujitu/tjsogodben.ipdl?N0000=115 Yamagami's patent can be searched by inputting "Kind code" B, "Number" S47-21739 in the data base] ] . This mode of operation was first experimentally discovered by B. J. Baliga in vertical device structures with a V-groove gate region and reported in the literature in 1979 [B. J. Baliga, “Enhancement and Depletion Mode Vertical Channel MOS Gated Thyristors”, Electronics Letters, Vol. 15, pp. 645-647, September 27, 1979.] . The device structure was referred to as a ‘V-groove MOSFET device with the drain region replaced by a p-type Anode Region’ in this paper and subsequently as the insulated-gate rectifier (IGR) [B. J. Baliga, et al, “The Insulated Gate Rectifier”, IEEE International Electron Devices Meeting, Abstract 10.6, pp. 264-267, 1982.] , the insulated-gate transistor (IGT) [ B. J. Baliga, “Fast Switching Insulated Gate Transistors”, IEEE Electron Device Letters, Vol. EDL-4, pp. 452-454, 1983.] , the conductivity-modulated field-effect transistor (COMFET). [J. P. Russell, et al, “The COMFET: A New High Conductance MOS Gated Device”, IEEE Electron Device Letters, Vol. EDL-4, pp. 63-65, 1983.] and "bipolar-mode MOSFET" [A.Nakagawa et al., High voltage bipolar-mode MOSFETs with high current capability", Ext. Abst. of SSDM, pp.309-312(1984)] .
Plummer found the same IGBT mode of operation in the four layer device(SCR) and he first filed a patent application for the device structure in 1978. USP No.4199774 was issued in 1980 and B1 Re33209 [ [http://www.google.com/patents?id=I8EGAAAAEBAJ&dq=Re33209 B1 Re33209 is attached in the pdf file of Re 33209] ] was reissued in 1995 for the IGBT mode operation in the four layer device(SCR.)
Hans W. Becke and Carl F. Wheatley invented a similar device for which they filed a patent application in 1980, and which they referred to as "power MOSFET with an anode region". [ [http://www.google.com/patents?id=0ug5AAAAEBAJ&dq=4,364,073, U. S. Patent No. 4,364,073] , Power MOSFET with an Anode Region, issued December 14, 1982 to Hans W. Becke and Carl F. Wheatley] This patent has been called "the seminal patent of the Insulated Gate Bipolar Transistor." [cite web | url = http://www.eng.umd.edu/ihof/wheatley.htm | title = C. Frank Wheatley, Jr., BSEE | work = Innovation Hall of Fame at A. James Clark School of Engineering] The patent claimed "no thyristor action occurs under any device operating conditions." This substantially means the non-latch-up IGBT operation for the entire device operation range.
Baliga had filed for a patent on his similar device the same year, [B. J. Baliga, “Gate Enhanced Rectifier”, U.S. Patent Number 4,969,028, Issued November 6, 1990.] but it took much longer to issue (1990, compared to Becke and Wheatley's 1982 issue date).
Devices capable of operating over an extended current range for use in applications were first reported by Baliga "et al." in 1982 [B. J. Baliga, et al, “The Insulated Gate Rectifier”, IEEE International Electron Devices Meeting, Abstract 10.6, pp. 264-267, 1982.] . A similar paper was also submitted by J.P. Russel et al. to IEEE Electron Device Letter in 1982 [ J.P. Russel et al., "The COMFETs - a new high-conductance MOS-gate device," IEEE Electron Device Lett., vol. EDL-4, pp.63-65, 1983] . The applications for the device were initially regarded by the power electronics community to be severely restricted by its slow switching speed and latch-up of the parasitic thyristor structure inherent within the device. However, it was demonstrated by Baliga and also by A.M. Goodman et al. in 1983 that the switching speed could be adjusted over a broad range by using electron irradiation [ B. J. Baliga, “Fast Switching Insulated Gate Transistors”, IEEE Electron Device Letters, Vol. EDL-4, pp. 452-454, 1983.] [A. M. Goodman et al., "Improved COMFETs with fast switching speed and high current capability," IEEE International Electron Devices Meeting Technical Digest, pp.79-82,1983] . This was followed by demonstration of operation of the device at elevated temperatures by Baliga in 1985 [B. J. Baliga, “Temperature Behavior of Insulated Gate Transistor Characteristics”, Solid State Electronics, Vol. 28, pp. 289-297, 1985.] . Successful efforts to suppress the latch-up of the parasitic thyristor and the scaling of the voltage rating of the devices at GE allowed the introduction of commercial devices in 1983 [Product of the Year Award: “Insulated Gate Transistor” General Electric Company, Electronics Products, 1983.] , which could be utilized for a wide variety of applications.
Complete suppression of the parasitic thyristor action and the resultant non-latch-up IGBT operation for the entire device operation range was achieved by A. Nakagawa et al. in 1984 [A. Nakagawa et al., "Non-latch-up 1200V 75A bipolar-mode MOSFET with large ASO", IEEE International Electron Devices Meeting Technical Digest, pp.860-861,1984.] . The non-latch-up design concept was filed for US patents [A.Nakagawa, H. Ohashi, Y. Yamaguchi, K. Watanabe and T. Thukakoshi, “CONDUCTIVITY MODULATED MOSFET” [http://www.google.com/patents?id=D68DAAAAEBAJ&dq=6025622 US Patent No.6025622(Feb.15, 2000)] , No.5086323 (Feb.4, 1992) and [http://www.google.com/patents?vid=USPAT4672407 No.4672407(Jun.9, 1987)] ] . To test the lack of latchup, the prototype 1200V IGBTs were directly connected without any loads across a 600V constant voltage source and were switched on for 25 microseconds. The entire 600V was dropped across the device and a large short circuit current flowed. The devices successfully withstood this severe condition. This was the first demonstration of so-called "short-circuit-withstanding-capability" in IGBTs. Non-latch-up IGBT operation was ensured, for the first time, for the entire device operation range [A. Nakagawa et al., "Experimental and numerical study of non-latch-up bipolar-mode MOSFET characteristics" IEEE International Electron Devices Meeting Technical Digest, pp.150-153, 1985] . In this sense, the non-latch-up IGBT proposed by Hans W. Becke and Carl F. Wheatley was realized by A. Nakagawa et al. in 1984. Products of non-latch-up IGBTs were first commercialized by Toshiba in 1985.
Once the non-latch-up capability was achieved in IGBTs, it was found that IGBTs exhibited very rugged and a very large safe operating area. It was demonstrated that the product of the operating current density and the collector voltage exceeded the theoretical limit of bipolar transistors, 2x105W/cm2, and reached 5x105W/cm2 [A. Nakagawa et al., "Experimental and numerical study of non-latch-up bipolar-mode MOSFET characteristics" IEEE International Electron Devices Meeting Technical Digest, pp.150-153, 1985] [A.Nakagawa et al., "Safe operating area for 1200-V non-latch-up bipolar-mode MOSFETs", IEEE Trans. on Electron Devices, ED-34, pp.351-355(1987)] .
An IGBT cell is constructed similarly to a n-channel vertical construction
power MOSFETexcept the n+ drain is replaced with a p+ collector layer, thus forming a vertical PNP bipolar junction transistor.
This additional p+ region creates a cascade connection of a PNP bipolar junction transistor with the surface n-channel
MOSFET. This connection results in a significantly lower forward voltage drop compared to a conventional MOSFET in higher blocking voltage rated devices. As the blocking voltage rating of both MOSFET and IGBT devices increases, the depth of the n- drift region must increase and the doping must decrease, resulting in roughly square relationship increase in forward conduction loss compared to blocking voltage capability of the device. By injecting minority carriers (holes) from the collector p+ region into the n- drift region during forward conduction, the resistance of the n- drift region is considerably reduced. However, this resultant reduction in on-state forward voltage comes with several penalties:
:The additional PN junction blocks reverse current flow. This means that IGBTs cannot conduct in the reverse direction, unlike a MOSFET. In bridge circuits where reverse current flow is needed an additional diode (called a freewheeling diode) is placed in parallel with the IGBT to conduct current in the opposite direction. The penalty isn't as severe as first assumed though, because at the higher voltages where IGBT usage dominates, discrete diodes are of significantly higher performance than the body diode of a MOSFET.
:The reverse bias rating of the N- drift region to collector P+ diode is usually only of 10's of volts, so if the circuit application applies a reverse voltage to the IGBT, an additional series diode must be used.
:The minority carriers injected into the n- drift region take time to enter and exit or recombine at turn on and turn off. This results in longer switching time and hence higher switching loss compared to a power MOSFET.
:The additional PN junction adds a diode-like voltage drop to the device. At lower blocking voltage ratings, this additional drop means that an IGBT would have a higher on-state voltage drop. As the voltage rating of the device increases, the advantage of the reduced N- drift region resistance overcomes the penalty of this diode drop and the overall on-state voltage drop is lower (the crossover is around 400 V blocking rating). Thus IGBTs are rarely used where the blocking voltage requirement is below 600 V.
Rather than using a device physics-based model,
SPICEsimulates IGBTs using Macromodels, a method that combines an ensemble of components such as FETs and BJTs in a darlington configuration. Fact|date=September 2007 An alternative physics-based model is the Hefner model, introduced by Allen Hefner of the NIST. It is a fairly complex model that has shown very good results. Hefner's model is described in an 1988 paper and was later extended to a thermo-electrical model and a version using SABER.Fact|date=September 2007
Bipolar junction transistor
* [http://eng.umd.edu/ihof/inductees/wheatley.html About the inventors]
* [http://www.elec.gla.ac.uk/groups/dev_mod/papers/igbt/igbt.html Device physics information] from the
University of Glasgow
* [http://www.intusoft.com/articles/Igbt.pdf Spice model for IGBT]
* [http://www.ixyspower.com/images/technical_support/Application%20Notes%20By%20Topic/IGBTs/IXYS_IGBT_Basic_I.pdf Insulated Gate Bipolar Transistor (IGBT) Basic] Ixys Corporation Application note IXAN0063
* [http://www.pwrx.com/Library.aspx?s=1^0|2^0|3^0|&k=using%20igbt Using IGBT Modules - Powerex]
* [http://www.abb.com/semiconductors ABB Switzerland Ltd Semiconductors]
* [http://www.mitsubishichips.com/Global/index.html Mitsubishi Electric Corporation]
* [http://www.semikron.com SEMIKRON International GmbH]
* [http://www.semicon.toshiba.co.jp/eng/product/transistor/index.html Toshiba]
* [http://www.denso-europe.com DENSO]
* [http://www.dynexsemi.com Dynex Semiconductor Ltd.]
* [http://www.fujisemiconductor.com Fuji Electric Device Technology]
* [http://www.infineon.com INFINEON Technologies]
* [http://www.irf.com/product-info/igbt/ International Rectifier]
* [http://ixys.com/Product_portfolio/power_devices.asp IXYS Corporation]
* [http://www.microsemi.com Microsemi Corporation]
* [http://www.microsystemscooling.com Parker Hannifin Power Electronics Cooling]
* [http://www.power-io.com/products/hdd.htm Power-io IGBT and Mosfet products]
* [http://www.pi.hitachi.co.jp/pse/product/igbt/index.html HITACHI IGBTs]
* [http://www.pwrx.com/summary/IGBT.aspx Powerex IGBTs]
Wikimedia Foundation. 2010.