Georges Creek Railroad

The Georges Creek Railroad was a railroad operated by the Georges Creek Coal and Iron Company. The railroad operated from 1853 to 1863 when the railroad was absorbed into the Cumberland and Pennsylvania Railroad.

The Georges Creek Coal & Iron Company was formed in 1835, and chartered in the State of Maryland on March 29, 1836. The president was John Henry Alexander, who also happened to be the Maryland State Engineer. Between 1837 and 1839, the company built an iron furnace at Lonaconing. The furnace, fueled by coke, went into blast in 1839. There was plenty of iron ore, limestone, water, and coal locally, but the major problem the company faced was transporting finished products to market. Production reached 75 tons per week, and local iron needs were quickly satisfied. Some products were shipped out by wagon, including such items as dowels for the Chesapeake and Ohio Canal walls. The adjacent casting house made farming implements, mine car wheels and track, and household utensils. The furnace output was in the form of pig iron, which was sold to be recast, or worked.

Ore for the furnace came from mines on the hill behind the furnace. Tram roads were used to transport the ore to the furnace. Later, the mine tunnels were used as storage cellars by residents on the hill. Ore was also mined on the opposite hillside, above the (later) silk factory, and the area around Buck Hill. Ore also came from Koontz.. The Tilley Field was on Hugh Weir's property, on the east side of a fork of Laurel Run. Another tunnel was located on the Philip Hansel land, just south of Tilley Field. It was reported to be convert|6|ft|m high, and a convert|100|ft|m long. From 1848 through 1858, ore came from the area around Pompey Smash (Vale Summit), on the south side of Dan's Rock Road.

One key ingredient of a blast furnace is the blast. The company bought the necessary machinery from the West Point Foundry in New York City. The machinery went by ship from New York to Georgetown, then by canal to Williamsport. Here, the parts were loaded on wagons for the final leg of the journey. The canal charged $3.50 per ton to transport the twenty tons of machinery parts. Only the boilers made it to Lonaconing before the canal froze in the winter of 1837. Ten additional wagonloads from Williamsport arrived at the site in November.

The blast machinery featured a convert|60|hp steam engine fed by five boilers. The steam cylinders were 18" in diameter, and convert|8|ft|m long. The system operated at a pressure of 50 pounds per square inch (psi). The steam cylinder drove a blast cylinder convert|5|ft|m in diameter, and convert|8|ft|m long. This forced about convert|3500|cuft|m3 per minute of air at 2.5 psi through the system. A very large iron regulator smoothed the air flow from the reciprocating cylinder. The air flowed through a series of pipes in the boiler furnaces and was heated to convert|700|°F|°C|abbr=on. The heated air then entered the blast furnace through two big water cooled nozzles called tuyeres. When the water supply failed, the furnace had to be operated with a less efficient cold blast. The first run of good iron came from the furnace on May 17, 1839. By May 23, the furnace was producing six tons per day. Seven tons of coal were required to produce one ton of the cast metal.

With production going well, iron piled up in Lonaconing. In 1842, sales of pig iron to foundries in Cumberland were begun, with delivery by wagon. An adjacent sawmill and lumberyard, also owned by the company, recorded sales to the Mount Savage Iron Works, then involved in building their own furnaces. In the fall of 1842, pig iron was offered to the B&O railroad at a price of $29. per ton, but delivery was still a problem. After experimenting with a horse powered tram road, the company realized that a rail line, built down the Georges Creek Valley toward the Potomac River at Westernport, would be the answer to the transportation issue. The rail line was finished from Lonaconing to Piedmont in 1853, where it connected with the recently arrived B&O Railroad. It was, unfortunately, too late to provide the needed market access for the Lonaconing Iron Furnace. The furnace in Lonaconing was abandoned in 1855, and the canal was never extended past Cumberland. Coal, not iron, became the most important commodity shipped out of the region on the railroad.Figure 5 - route of GCRR, showing tram road path also - ps

A major figure in the Lonaconing Iron Furnace was Christian Edward Detmold, (1810-1887). A civil engineer, born in Hanover, Germany, Detmold had entered the U.S. at age 16, en route to Brazil to join the Army, but instead stayed in the U.S. He did surveys for a railroad in Charleston, S.C., won a $500. prize for a horse treadmill car from the Charleston & Hamburg Railroad & Canal Co., and worked for the U.S. War Department on the construction of Fort Sumpter. From 1845 to 1852 Detmold was involved in iron production at Lonaconing. He was responsible for the construction of the tram road in 1847 from Lonaconing to Clarysville. This line connected with the Eckhart Branch Railroad, constructed by the Maryland Mining Company. Detmold leased the furnace, overhauled the boilers, and rebuilt the engine house. The furnace went back into blast in May 1846, and Detmold had a flourishing business by 1847. He was producing 2500 tons of pig iron annually. The company, perhaps jealous of his success, declined to renew his lease. He moved on to direct construction of the Exhibit of Industry, at the Crystal Palace in New York which opened in July 1853. C. E. Detmold is remembered by having both a town, and a C&P engine named after him.

After taking back the furnace facility from Detmold, Georges Creek Coal & Iron operated it sporadically. The furnace produced 1,860 tons of pig iron in its last active year, 1855. It was then shut down, and abandoned. Harvey (ref. 21) states that the furnace facility was too technologically advanced for its time. However, it provided an impetus for the mining industry and for the construction of the railroad, and served as an model for a similar iron working facility built at Mount Savage. There was technology sharing and cooperation between the facilities at Lonaconing and at Mount Savage.

The furnace complex at Lonaconing was visited by the Superintendent of Construction for the B&O, a Mr. Casper Wever, Esq., in June 1839. Shortly afterwards, the shareholders of the C&O Canal visited. With the furnace up and operating, the facility expansion plans included a forge and rolling mill. However, these were never built. The company began to concentrate on the railroad to meet with the canal and the railroad at Westernport. By 1850, surveys were complete. The B&O reached Piedmont, across the Potomac River from Westernport, in July 1851. In September of that year, the railroad construction began up the Georges Creek. The railroad was opened on May 9, 1853. In June, a total of 1,061 tons of coal were shipped. In all of 1855, 225,000 tons of coal were shipped, sometimes in 102 car trains. Iron ore or cast iron did not figure into the shipments. In 1856, the line was extended from Lonaconing northward to connect with the C&P from Frostburg. The Georges Creek Coal & Iron Company’s convert|9.2|mi|km|sing=on railroad was acquired by the C&P on October 23, 1863. The shops and engine house at Lonaconing were used until 1867. These were located just north of where the road to Dan’s Mountain State Park merges with State Route 36, at Water Station Road, north of Lonaconing. Interestingly, this section of line still saw use in 1998 for on-demand coal service. In 1991, the Georges Creek subdivision of CSX hauled 195,197 tons of coal over this line, as compared with the 225,000 tons by the Georges Creek Rail Road in 1855.

Locomotive builders Baldwin and Smith & Perkins sold engines and rolling stock to the Georges Creek Company. Ross Winans of Baltimore sold wheels and axles to the GCC&I for mine cars. Passenger service was provided on the Georges Creek Railroad with their 2-6-0 engine. A list of motive power for the Georges Creek Rail Road has been compiled, but it is not known if this is a complete list. All of the listed engines were transferred to Cumberland & Pennsylvania Railroad ownership, as part of the buyout. No pictures of the 2-6-0 or 0-6-0 engines are known to exist. Locomotives were generally named after geographical references, or persons of significance. The significance of Mr. A. H. Stump has not yet been determined.

References

# Katherine A. Harvey, "The Lonaconing Journals: The Founding of a Coal and Iron Community, 1837-1840," "Transactions of the American Philosophical Society", 1977 ns67: 1-78