Pass of Brander stone signals

Pass of Brander stone signals

The Pass of Brander stone signals are a series of railway signals situated in the Pass of Brander, between Loch Awe and Taynuilt stations on the Oban branch of the West Highland Line in Scotland. They are part of a warning system that advises train drivers to exercise caution in the event of a rock-fall.

The railway through the Pass of Brander was opened in July 1880. It was originally part of the Callander and Oban Railway. Since the line's opening, rocks falling from the steep slopes of Ben Cruachan onto the track had threatened to cause a derailment. The secretary of the C&OR, John Anderson, devised a system that would detect falling rocks and provide a warning to drivers. A screen of wires, linked to semaphore signals, would be erected on the mountainside alongside the railway. In the event of one or more wires being broken, signals in each direction would be automatically placed at 'danger'.

The first length of screen was brought into use in January 1882. It was convert|1112|yd|m|0 in length and there were four associated signals. In April 1883, the screen was extended at both ends, bringing its total length to convert|5659|yd|m|0 . The final extension, at the west end, was made in September 1913, increasing the length to convert|7054|yd|m|0 - just over four miles (6.5 km).

Signals are erected at intervals of approximately a quarter mile (400 m) along the affected area. There are seventeen signals in all. They are numbered from "1" to "17", with signal 1 being at the east (Dalmally) end. All except number 9 stand on the south side of the line. All the signals apart from numbers 1 and 17 carry two semaphore arms, one for each direction. The signal arms usually all stand in the 'clear' position.

Although trip wires working with colour light signals are occasionally used alongside railways in the vicinity of airports, the remarkable thing about the Pass of Brander system is its age and the fact that it is entirely mechanical in operation.

The system is sometimes referred to as 'Anderson's Piano', after its inventor and the noise that the tensioned screen wires are said to make in the wind.

See also

* Railway slide fence

External links

[http://www.signalbox.org/gallery/sc/taynuilt.htm Stone signals in the Pass of Brander] description and photograph

References

*cite book|last=Thomas|first=John|title=The Callander and Oban Railway|publisher=David and Charles|location=Newton Abbot England|year=1966|pages=p 83


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • British railway signals — Modern British signalling is based on a two, three and four aspect colour light system using non permissive block rules. It is a basic progression of the original semaphore signalling that can still be found on many secondary lines. Colour light… …   Wikipedia

  • UK railway signalling — The railway signalling systems used across the majority of the United Kingdom rail network use lineside signals to advise the driver of the status of the section of track ahead. Most lineside signals are in colour light form, but a significant… …   Wikipedia

  • Railway semaphore signal — One of the earliest forms of fixed railway signal is the semaphore. These signals display their different indications to train drivers by changing the angle of inclination of a pivoted arm . Semaphore signals were patented in the early 1840s by… …   Wikipedia

  • Railway slide fence — Part of a railway signaling system, a slide fence is a fence whose purpose is to prevent trains from being derailed by rock slides in mountainous areas where rock slides may occur without warning. The fence is designed to be displaced by a rock… …   Wikipedia

  • Falls of Cruachan railway station — Infobox UK station name = Falls of Cruachan other name = Easa Chruachain code = FOC caption = manager = First ScotRail locale = Cruachan borough = Argyll and Bute latitude = longitude = lowusage0405 = 124 lowusage0506 = 108 lowusage0607 = 154… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”