- Neck-through
-
Neck-through construction on Ibanez Studio guitar
Neck-through or neck-thru (or in full form neck through body) is a method of electric guitar or bass guitar construction that involves extending the piece (or pieces, in a laminate construction) of wood used for the neck through the entire length of the body, essentially making it the core of the body. The strings, fretboard, pickups and bridge are all mounted on this piece. So-called "ears" or "wings" (i.e. side parts of the body) are glued or laminated to the central "stick". The "wings" may be bookmatched in order to give a symmetrical appearance, and are often cut from one piece of wood.
Contents
History
"The Log", a prototype solid-body guitar built by Les Paul in 1940, can be considered as a forerunner of neck-through, as he built it by using a 2x4 piece of pine as the neck and body core, and mounted the disassembled part of an archtop onto it.
Rickenbacker was the first guitar manufactured to use the modern variant of this technique, although this was restricted exclusively to semi-hollowbody guitars.[citation needed]
Advantages and disadvantages
Neck-through construction is significantly harder to mass-produce than bolt-on or set-in neck constructions and is primarily found on high-end guitars.[citation needed] It is somewhat more common in basses than in guitars. Neck-thru construction allows easier access to upper frets, because there is no need for a heel — the thickened area where a neck would "bolt-on" (although technically, 3-4 large screws are used) to the body. Many musicians assert that neck-through construction provides greater sustain and allows the instrument to stay in tune longer.
Repairs to the neck are usually expensive and tedious. In many cases, it is usually easier to remove the old neck completely, either by taking the wings off and putting an entirely new core in, or by converting the guitar to a bolt-on or set neck by creating a heel and affixing the new neck to the core already in place, rather than to try to repair the neck itself. However, thanks to excellent stability and reaction to string tension and pressure, neck through guitars are often much more sturdy than many other guitars on the market.
Usage
This structure is used by many companies, including Parker Guitars, BC Rich, Yamaha, Ibanez (primarily on basses), Jackson, Alembic, Schecter, Carvin, ESP Guitars, and Rickenbacker. The Gibson Firebird and Thunderbird, which have had intermittent production, also use this technique. This method of neck-to-body affixation is also popular with independent guitar builders, who can typically devote more time to such a labor-intensive neck joint than a mass-producing company could.
References
This article relating to guitars is a stub. You can help Wikipedia by expanding it.
