IBM 7080

The IBM 7080 was a transistorized variable word length BCD computer in the IBM 700/7000 series commercial architecture line, introduced in August 1961, that provided an upgrade path from the vacuum tube IBM 705 computer.

After the introduction of the IBM 7070, in June 1960, as an upgrade path for both the IBM 650 and IBM 705 computers, IBM realized that it was so incompatible with the 705 that few users of that system wanted to upgrade to the 7070. That prompted the development of the 7080, which was fully compatible with all models of the 705 and added many improvements.

IBM 705 compatibility modes

For backward compatibility with the IBM 705 the machine had two switches on the operator's control panel, "705 I-II" and "40K memory", that selected the mode the machine started in.
*705 I mode — 20,000 characters ("705 I-II" On, "40K memory" Off)
**Indirect addressing is disabled
**Communication channels are disabled
*705 II mode — 40,000 characters ("705 I-II" On, "40K memory" On)
**Indirect addressing is disabled
**Communication channels are disabled
*705 III mode — 40,000 characters ("705 I-II" Off, "40K memory" On)
**Indirect addressing is enabled
**Communication channels are enabled
*705 III mode — 80,000 characters ("705 I-II" Off, "40K memory" Off)
**Indirect addressing is enabled
**Communication channels are enabled

Software can then command the 7080 to enter full 7080 mode from any 705 startup mode.
*7080 mode — 160,000 characters
**Indirect addressing is disabled
**Communication channels are enabled

Regardless of mode, the 7080 operates at full 7080 speed.

External links

* [http://www.bitsavers.org/pdf/ibm/7080/ IBM 7080 documents on Bitsavers.org]
* [http://www.cozx.com/~dpitts/ibm7090.html Dave Pitts' IBM 7090 support] – Includes a cross assembler for the IBM 705/7080
* [http://web.archive.org/web/20041213053346/www.bobbemer.com/BIRTH.HTM BIRTH OF AN UNWANTED IBM COMPUTER Computer History Vignettes By Bob Bemer] IBM 7070 connection to IBM 7080