Standardisation in oil industry

Purpose "This site seeks to promote deeper standardization within the oil and energy industry by highlighting areas where standardization has worked very well and where it has not and why, and provoking discussions on the path forward for better standardization."

OLF, the Norwegian Oil Industry Association, is a professional body and employer's association for oil and supplier companies engaged in the field of exploration and production of oil and gas on the Norwegian continental shelf. OLF is a member of the Confederation of Norwegian Business and Industry. OLF's task is to lead the industry's joint effort for development of a progressive and competitive petroleum industry with a good reputation and good connections with the authorities, stakeholders and public opinion. OLF shall be a unifying, efficient and effective organization, which shall emerge as the petroleum industry's foremost advocate in matters that concern the entire sector.

CASE 1: OLF 70 - Effectiveness through standardisation

OLF 70 is one of several joint industry project between oil industry operators and the various suppliers of services and equipment in the industry.

The overall purpose of the document is to issue a guideline on the application of IEC 61508 and IEC 61511 in the Norwegian Petroleum Industry, and thereby simplify the use of the standards.

According to the PSA management regulations (§1 and §2), performance requirements shall be established for all safety barriers on an installation. For instrumented safety systems, special reference is made to IEC 61508 and this document as the recommended standard for specification, design and operation of such safety systems.

Whereas IEC 61508 describes a fully risk based approach for determining SIL (Safety Integrity Level) requirements, this document provides minimum SIL requirements for the most common instrumented safety functions on a petroleum production installation (ref. chapter 7). Deviations from these requirements may however be identified(ref. section 7.7), and in such case the overall methodology and documentation should be in accordance with IEC 61508.

Conventional Industry practice

There are still many standards in use within the industry. Shell for example use the IPF method, BP has its own. These standards could be supplements to areas lacking within the standards. Experience shows that the majors tend to go against standards but non adoption of standards tend to lead to unclarity of intention, mistaken interpretations which then leads to costs creep, gold plating and scope.

OLF 70 Methodology

Costs and Benefits

* Standardized Industrial design
* Consistent approach.
* Suppliers know what they deliver
* Easier to insure.

elected References on topic

*"

External links