- Chemin de fer Nyon-St-Cergue-Morez
. The Chemin de Fer Nyon-St. Cergue-Morez (NStCM) is a
narrow gauge railway which nowadays operates betweenNyon , on the northern shore ofLake Geneva and the French border atLa Cure .History
The line, built to RailGauge|1 gauge, was opened in three sections, the first from Nyon, a town on the shores of Lake Geneva, to the Jura mountain resort village of
Saint-Cergue on12 July 1916 , then to the French border at La Cure, opened on18 August 1917 . The third section, built by the French Company Chemins de fer électriques du Jura (CFEJ), taking the line over the border was opened to the French town ofMorez on7 March 1921 giving a total length of 39 km. In effect this small line linked the Swiss railways main line from Geneva toLausanne to that of the Chemin de FerParis ,Lyon ,Mediterranee (PLM) (from 1938 this was theSNCF ). With the exception of the period from 1940 to 1948 this enabled direct services to operate on a daily basis, although wintertime conditions often made this a difficult feat. Because of its steep gradients the line was electrified from the outset, originally at the unusual, if not unique, 2,200 volts d.c.The French section (12 km) from La Cure to Morez closed on28 September 1958 .The line
Originally the line commenced outside the main station in Nyon and after passing below the
Swiss railways main line it climbed steadily, steeply in places taking large curves to ease the gradient, to the mountain resort of St. Cergue. From here it runs alongside the road through theCol de la Givrine , with a summit of 1232 m. above sea level, to the village of La Cure, nowadays its upper terminus. It was here the line crossed the French border and again running alongside the road, passing the village of Les Rousses it duly arrived in the streets of Morez. The line then descended steeply to terminate in front of the PLM station.Locomotives and Rolling Stock
*all motor coaches are double cab
*all driving trailers are single cab
*B 341-342 are MU-wired for push-pull operation with 1-5, 11 and 301-305Abbreviations
*ACMV : Ateliers de Constructions Mecanique de Vevey
*BBC : Brown, Bovrie & Cie
*BD : Bremgarten-Dietikon Bahn
*BTI : Biel-Taufelen-Ins Bahn
*CJ :Chemins de fer du Jura
*LEB : Chemin de fer Lausanne-Echallens-Bercher
*RhB : Rhätische Bahn
*SAAS : S.A. Ateliers Sécheron, Geneva
*SWS : Schweizerische Wagon & Aufagefabrik
*YSteC : Chemins de fer Yverdon-Ste.CroixModernisation
The earliest section to open, that in Switzerland, continued after the closure of the French section and in the 1980s was part of a modernisation programme. The voltage was changed to the more universally used 1500 volt d.c. and automatic block signalling installed. New rolling stock arrived on the line in 1985 with the introduction of new “automotrice” – powered driving railcars and these were followed the following year by "voitures pilote" - driving trailers. Plans were put forward in 1999 to extend the line some 2.5 km. over the French border to the village of
Les Rousses but this did not prove cost effective to the communities involved and was rejected. In 2004 the Nyon terminus was moved to a two platform underground station on the north side of the main line approached by escalators from the station underpass.Preservation
The original “automotrice”, of which 7 were built, were heavy duty vehicles and could haul several trailer cars. Two of these have survived, restored to working order, at the Chemin de Fer de la Mure near Grenoble. Two other examples were sold to the same railway but have yet to be restored. Some trailer cars have also survived including No. B7 which has ben restored at the
Blonay-Chamby museum line nearMontreux and another example at the Chemin de Fer Voles Ferrees du Velay inHaute Loire . The vehicles carried a dark red livery.
Wikimedia Foundation. 2010.