Open system (control theory)
- Open system (control theory)
-
An open system is a feedforward system that does not have any feedback loop to control its output in a control system in systems theory. The system is an "open" system because it does not have a feedback loop in its control. In contrast, a closed system uses on a feedback loop to control the operation of the system. In an open system, the output of this system is not fed back into the input to the system for control or operation. An open system is essentially a feedforward system. feedforward increases speed
Wikimedia Foundation.
2010.
Look at other dictionaries:
Open system (systems theory) — This article is about systems theory. For other uses, see Open system (disambiguation). Open System Model (basics) An open system is a system which continuously interacts with its environment. The interaction can take the form of information,… … Wikipedia
Closed system (control theory) — The terms closed system and open system have long been defined in the widely (and long before any sort of amplifier was invented) established subject of thermodynamics, in terms that have nothing to do with the concepts of feedback and… … Wikipedia
Control theory — For control theory in psychology and sociology, see control theory (sociology) and Perceptual Control Theory. The concept of the feedback loop to control the dynamic behavior of the system: this is negative feedback, because the sensed value is… … Wikipedia
Controller (control theory) — In control theory, a controller is a device which monitors and affects the operational conditions of a given dynamical system. The operational conditions are typically referred to as output variables of the system which can be affected by… … Wikipedia
H-infinity methods in control theory — H ∞ (i.e. H infinity ) methods are used in control theory to synthesize controllers achieving robust performance or stabilization. To use H ∞ methods, a control designer expresses the control problem as a mathematical optimization problem and… … Wikipedia
Control engineering — Control systems play a critical role in space flight Control engineering or Control systems engineering is the engineering discipline that applies control theory to design systems with predictable behaviors. The practice uses sensors to measure… … Wikipedia
Control (management) — Controlling is one of the managerial functions like planning, organizing, staffing and directing. It is an important function because it helps to check the errors and to take the corrective action so that deviation from standards are minimized… … Wikipedia
Control system — For other uses, see Control system (disambiguation). A control system is a device, or set of devices to manage, command, direct or regulate the behavior of other devices or system. There are two common classes of control systems, with many… … Wikipedia
Open-loop controller — An open loop controller, also called a non feedback controller, is a type of controller that computes its input into a system using only the current state and its model of the system. A characteristic of the open loop controller is that it does… … Wikipedia
Open and closed systems in social science — Ludwig Bertalanffy describes two types of systems: open systems and closed systems. The open systems are systems that allow interactions between its internal elements and the environment. An open system is defined as a “system in exchange of… … Wikipedia
