Z scale

Infobox Model Rail Scale
name = Z Scale
image_filename =
image_caption =
widthpx =
scale =
ratio = 1:220
gauge = 6.5 mm
prototype_gauge = Standard gauge|

Until the 2006 announcement of T scale, Z scale (1:220) was the smallest commercially available model railway scale with a track gauge of 6.5 mm. Z scale trains operate on 0-8 VDC and offer the same operating characteristics as all other two-track, direct-current, analog model railways. Newer Z scale locomotives feature Digital Command Control (DCC) decoders.

History

Z scale was introduced by the German model train manufacturer Märklin in 1972 at the Nuremberg Toy Fair. It was a brainchild of Helmut Killian, Märklin's head design engineer at the time. Letter Z was chosen to designate the new scale as it was thought at the time that there would not be a commercial model railway scale even smaller than Z, in the future. Hence the last character of the alphabet in German and English languages. Since 1972 there have been some attempts to bring even smaller scales in the market, but they remain niche products without wider following at this time. In 1978 a Märklin Z scale locomotive pulling six coaches made its entry to Guinness Book of Records by running nonstop 1219 hours and travelling a distance of 720 km before the train stopped.

Z scale at its inception was predominantly a European scale, but it has an increasing number of loyal followers in other parts of the world. There are now manufacturers in North America and Japan, among others. Z scale enthusiasts throughout Europe, North America and Japan participate regularly at most national and regional model railroad exhibitions and shows, where they have demonstrated the outstanding operation and layout design characteristics of the scale.

As early as 1988, Märklin announced their intention to offer digital train control systems in Z scale and Märklin's 1988 Z scale product catalog listed three locomotives with a built-in digital decoder. Unfortunately, the technology was not developed enough and the manufacturer had to cancel these plans mainly due to heat dissipation problems of locomotive decoders. Since then, these problems have been solved, and Z scale has embraced advanced electronics. An increasing number of modellers have converted their locomotives to use third party digital train control systems. The most popular digital system in Z scale is the NEM standard, Selectrix, which offers the smallest decoders in the market with thicknesses of less than 2 mm. The universally popular Digital Command Control (DCC) has also its followers in Z scale. There are drop-in decoders available from various companies today, and some of them replace the lighting printed circuit boards of recent diesel or electric locomotives.

While still considered to be a curiosity by some, Z scale is now a legitimate, mature modelling scale. However, Z scale rolling stock, buildings and figures remain still somewhat less widespread and higher-priced than their counterparts in more popular HO scale, OO scale, and N scale.

Advantages and drawbacks

The diminutive size of Z scale makes it possible to build very compact train layouts that can easily fit a normal sized briefcase. Z scale can also be beneficial when there is a need to fit more scale space into the same physical layout that would be used by a larger-scale model. Several transportation museums, for instance, have used Z scale to present some real world railway sceneries in smaller scale. Theoretically, Z scale allows longer trains and smoother curves than is possible in larger scales.

However, due to the small size of Z scale, and in particular the reduced weight of the locomotives (a small Z scale engine can weigh as little as 20 grams, well under one ounce), it can be challenging to ensure reliable operation. In particular, the track must be kept clean - small spots of dirt can easily stop the locomotive. Poorly installed trackwork can be a source of constant derailings of rolling stock. Additionally, the low weight of Z scale locomotives contributes to their difficulty pulling trains up grades and in practice the grade should be kept rather moderate. For trains of reasonable length (six four-axle cars), 2% grade is about the maximum for reliable operation. For shorter trains it is possible to go up to 4%. Pulling power of locomotives can be increased by adding weight, but due to the limited internal space available, it is vital that the weighting material has a relatively high density; tungsten powder and lead are popular choices.

Manufacturers

While Märklin remains still the most important Z scale manufacturer, there are smaller manufacturers of Z scale rolling stock both in Europe and in North America, including in particular Micro-Trains of Talent, Oregon. In addition to custom Z scale rolling stock for both European and North American modelers, the German company Freudenreich has introduced a complete narrow-gauge Z scale system with 4.5mm gauge track, which corresponds to metric gauge in prototype and is designated as Zm scale following the NEM standard scale naming system.

External links

* [http://www.ztrains.com/pages/beginning/introduction/introduction.html A History Of Z Scale]
* [http://www.zscale.org/ Do It Yourself guide to modelling, troubleshooting, and collecting Z Scale]
* [http://www.saunalahti.fi/~animato/rail/rail2.html Building a coffee-table layout in Z Scale]
* [http://guidetozscale.com/ A Guide to Z-Scale]
* [http://www.zbendtrack.com/ Z-Bend Track modular standard]
* [http://www.zmod.no ZMOD Norwegian modular standard]
* [http://www.val-ease-central.com/ Z Scale travelling museum layout]
* [http://www.railserve.com/Models/Layouts/Z_Scale/ Z Scale Layouts & Modeling Tips]
* [http://www.zscaleinfo.com/ A comprehensive guide to Manufactures, Retailers, Clubs and General Information]
* [http://americanzscale.org/ American Z scale, a resource for American-prototype Z scale products and information]
* [http://www.ztrack.com/ Z Scale Magazine]
* [http://www.nn3.ca/main/main-japanese-zj-gauge-p1.htm Japanese Z Scale Info in English]