P4 gauge

P4
Scale per foot:	4mm to 1ft
Scale ratio:	1:76.2
Gauge:	18.83 mm (0.741 in)
Prototype Gauge:	Standard gauge

P4 or Protofour is a set of standards (of which the article name "P4 gauge" is a misnomer as the standards concern much more than simply the gauge of the track) for model railways allowing a more accurate construction of models to a scale of 4 mm to 1 foot (1:76.2), the predominant scale of model railways of the British prototype. For historical reasons almost all manufacturers of British prototype models use the inaccurate 00 gauge (1:76.2 models running on under-scale 16.5 mm (0.650 in) gauge track). P4 represents the most significant development of a movement that started in the 1950s to model accurately to the 4mm to 1 foot scale.

The P4 standards specify a scale model track gauge of 18.83 mm (0.741 in) for standard gauge railways. The late Joe Brook Smith was the first to use of an exact scale track gauge in July 1964, when also the term “Protofour” was invented by Malcolm Cross. The standards were later published in Model Railway News by the Model Railway Study Group in August 1966.

Just as in the prototype railway, on a model the wheel/rail interface is the fundamental aspect of reliable operation. So as well as a track gauge, P4 also specifies the wheel profile and track parameters to use, which are largely a scaled down version of real life standards with some allowances for practical manufacturing tolerances.

P4 standards have been extended to several other prototypes. Broader than standard gauges have been modelled using P4 standards, including Brunel's 7 ft 0 ¹⁄₄ in (2,140 mm) gauge, and Irish P4, the 5 ft 3 in (1,600 mm) Irish broad gauge modelled in P4 in 4mm scale with 21 mm (0.827 in) gauge track. Several successful models of narrow gauge prototypes with a correspondingly accurate track gauges have also been produced to P4 standards.

P4 standards are promoted worldwide by the Scalefour Society, which is based in the United Kingdom. The EM Gauge Society also provides support for modelling to P4 standards: many P4 modellers belong to both societies. The standards can be downloaded from http://scalefour.org/downloads/P4-standards.pdf and also viewed at http://www.clag.org.uk/p4standards.html

The P4 standards include options with reduced tolerances and an increased back-to-back measurement that are an exact scaling down of prototype dimensions, and which are referred to as S4 standards. These are chosen by railway modellers who wish to avoid the minor compromises designed into P4 standards.

See also

• Rail transport modelling scales
• Model railway scales

External links

• Scalefour Society, supporting modelling to P4 and S4 standards
• EM Gauge Society, supporting modelling to both EM and P4 standards
• CLAG - a group of finescale modellers based around London, England interested in building visually accurate working scale models in 4mm scale 18.83 mm (0.741 in) gauge
• [1]

This model rail-related article is a stub. You can help Wikipedia by expanding it.v · Categories: 4mm scale Model rail stubs Wikimedia Foundation. 2010. Игры ⚽ Нужно решить контрольную? Empress State Building USS Los Angeles (CA-135) Look at other dictionaries: Gauge — Gauge, n. [Written also gage.] 1. A measure; a standard of measure; an instrument to determine dimensions, distance, or capacity; a standard. [1913 Webster] This plate must be a gauge to file your worm and groove to equal breadth by. Moxon. [1913 …   The Collaborative International Dictionary of English Gauge cock — Gauge Gauge, n. [Written also gage.] 1. A measure; a standard of measure; an instrument to determine dimensions, distance, or capacity; a standard. [1913 Webster] This plate must be a gauge to file your worm and groove to equal breadth by. Moxon …   The Collaborative International Dictionary of English Gauge concussion — Gauge Gauge, n. [Written also gage.] 1. A measure; a standard of measure; an instrument to determine dimensions, distance, or capacity; a standard. [1913 Webster] This plate must be a gauge to file your worm and groove to equal breadth by. Moxon …   The Collaborative International Dictionary of English Gauge glass — Gauge Gauge, n. [Written also gage.] 1. A measure; a standard of measure; an instrument to determine dimensions, distance, or capacity; a standard. [1913 Webster] This plate must be a gauge to file your worm and groove to equal breadth by. Moxon …   The Collaborative International Dictionary of English Gauge lathe — Gauge Gauge, n. [Written also gage.] 1. A measure; a standard of measure; an instrument to determine dimensions, distance, or capacity; a standard. [1913 Webster] This plate must be a gauge to file your worm and groove to equal breadth by. Moxon …   The Collaborative International Dictionary of English Gauge of a carriage — Gauge Gauge, n. [Written also gage.] 1. A measure; a standard of measure; an instrument to determine dimensions, distance, or capacity; a standard. [1913 Webster] This plate must be a gauge to file your worm and groove to equal breadth by. Moxon …   The Collaborative International Dictionary of English Gauge point — Gauge Gauge, n. [Written also gage.] 1. A measure; a standard of measure; an instrument to determine dimensions, distance, or capacity; a standard. [1913 Webster] This plate must be a gauge to file your worm and groove to equal breadth by. Moxon …   The Collaborative International Dictionary of English Gauge rod — Gauge Gauge, n. [Written also gage.] 1. A measure; a standard of measure; an instrument to determine dimensions, distance, or capacity; a standard. [1913 Webster] This plate must be a gauge to file your worm and groove to equal breadth by. Moxon …   The Collaborative International Dictionary of English Gauge saw — Gauge Gauge, n. [Written also gage.] 1. A measure; a standard of measure; an instrument to determine dimensions, distance, or capacity; a standard. [1913 Webster] This plate must be a gauge to file your worm and groove to equal breadth by. Moxon …   The Collaborative International Dictionary of English Gauge stuff — Gauge Gauge, n. [Written also gage.] 1. A measure; a standard of measure; an instrument to determine dimensions, distance, or capacity; a standard. [1913 Webster] This plate must be a gauge to file your worm and groove to equal breadth by. Moxon …   The Collaborative International Dictionary of English Gauge wheel — Gauge Gauge, n. [Written also gage.] 1. A measure; a standard of measure; an instrument to determine dimensions, distance, or capacity; a standard. [1913 Webster] This plate must be a gauge to file your worm and groove to equal breadth by. Moxon …   The Collaborative International Dictionary of English 18+ © Academic, 2000-2024 Contact us: Technical Support, Advertising Dictionaries export, created on PHP, Joomla, Drupal, WordPress, MODx. Mark and share Search through all dictionaries Translate… Search Internet Share the article and excerpts Direct link … Do a right-click on the link above and select “Copy Link”