Orient Express (Worlds of Fun)

Orient Express
Location	Worlds of Fun
Park section	Orient
Coordinates	39°10′34″N 94°29′18″W / 39.176133°N 94.488338°W / 39.176133; -94.488338Coordinates: 39°10′34″N 94°29′18″W / 39.176133°N 94.488338°W / 39.176133; -94.488338
Status	Demolished
Opened	April 4, 1980
Closed	October 2003
Type	Steel
Manufacturer	Arrow Dynamics
Designer	Ron Toomer
Model	Custom Looping Coaster
Track layout	Terrain
Lift/launch system	Chain
Height	117 ft (36 m)
Drop	115 ft (35 m)
Length	3,470 ft (1,060 m)
Max speed	50 mph (80 km/h)
Inversions	4
Duration	2:15
Max vertical angle	55°
Capacity	1,800 riders per hour
Max G force	3.5
Orient Express at RCDB
Pictures of Orient Express at RCDB
Amusement Parks Portal

The Orient Express was a steel roller coaster at Worlds of Fun amusement park in Kansas City, Missouri. The Orient Express was introduced to Worlds of Fun in 1980. The red-orange track was in between the two entrances of the park. The station house is still visible, and contains the park's haunted attraction Lore of the Vampire and Club Blood.

The Orient Express was the first coaster ever to have a "Kamikaze Curve" element, which was later termed a "boomerang" by Arrow Dynamics and a "batwing" by Bolliger & Mabillard. This element consists of a 90-degree dive to the right or left (similar to half a corkscrew), followed by half of a traditional loop element, then a rising half loop, then a final 90-degree dive sending the track in the same direction it entered the element. This element was later often used on Arrow's larger looping coasters, as well as on the Vekoma designed Goudurix at Parc Astérix, where it was known as a "Double Sidewinder", and on B&M's inverted roller coasters. The Orient Express also featured a tunnel prior to the lift hill that housed the Orient Express Dragon, a wooden sign that had the ride's logo illuminated.

The queue house had a "chicken exit" that guests could take if they chickened out at the last minute. The sign for the chicken exit now resides in the station house for Timber Wolf.

The Orient Express was also the second full circuit roller coaster to have interlocking loops, the Loch Ness Monster being the first. Lightnin' Loops at Six Flags Great Adventure, which opened in 1978, was the first roller coaster to have interlocking loops, but the coaster was made up of two separate shuttle tracks. With the retirement of the Orient Express, the Loch Ness Monster is again the only coaster with this feature.

The ride started out running three trains at once but over time only two would run at a time due to the ride's blocking system. If there was a backup in the station it caused a train to stop just outside the station and another train would stop half way through the ride on the C-Brake. This caused the ride to shut down and the only way to get the train out of the trim brakes half way through the ride was to have an employee climb up the C-Brake stairs and manually release the brakes.

The Orient Express suffered several malfunctions within the last seasons of its life. It broke down often and in 1999 the last two cars derailed just before the final brake, leaving riders stranded for a couple of hours. Contrary to some rumors, no one ever died on the roller coaster, and it also was never stuck upside-down. The site Orient Express was located on also remains empty, contrary to the belief that Spinning Dragons and Patriot replaced the roller coaster. Behind Spinning Dragons, the ride's old station still remains.

Other information

Number of trains: 3
Number of cars per train: 7
Passengers per car: 4

The ride was broken into 5 blocks. Block A was the house. Block B was the lift. Block C was from the first drop to through the first loop to the C break. Block D was the second loop, the Kamikaze Curve to the breaks outside the house. When running three trains, one would be in the house loading passengers while the second would be climbing the lift and the third was out on the track. As the lift train cleared the lift, the house train was released for the lift. This was a fast paced operation since the car had to enter the house, unload and load all in the span of time it took a train to climb the lift. Shutdowns would happen when the house train did not clear the house by the time the train behind it reached the C break. This was mainly caused by riders taking too long to exit or load in the train.

To restart after a shutdown took two people. One person would go to the manual break release under the C brake while the other ran the control panel breaks in the house. One train would be taken to the top of the lift and stopped. The second train would be stopped at the C brake before the second inverted loop. The third train would be in the house. To start the process, the C break was pulled to release the train for the second loop. The lift train would be released as soon as the C block train was clear of the break. Once the lift train cleared the house train was released. This was done several times during the first year of operation until the ride was reduced to two trains.

If the track was wet it would occasionally not make it through the second loop. This was called a "roll back" and shut down the ride. The car would be winched up to the C break to complete the run.