Icebreaker

[
thumb|right|300px|German icebreaker "Polarstern"]

An icebreaker is a special purpose ship or boat designed to move and navigate through ice-covered waters. Although the term usually refers to icebreaking ships, it can also refer to smaller vessels (e.g., icebreaking boats that were used on the Canals of Great Britain in the days of commercial carrying).

For a ship to be considered an icebreaker it requires three components: a strengthened hull, an ice-clearing shape, and the power to push through, none of which are possessed by most normal ships.

To pass through ice-covered water, an icebreaker uses its great momentum and power to drive its bow up onto the ice, breaking the ice under the immense weight of the ship. Because a buildup of broken ice in front of a ship can slow it down much more than the breaking of the ice itself, the speed of the ship is increased by having a specially designed hull to direct the broken ice around or under the vessel. The external components of the ship's propulsion system (propellers, propeller shafts, etc.) are at even greater risk of damage than the vessel's hull, so the ability for an icebreaker to propel itself onto the ice, break it, and successfully clear the debris from its path is essential for its safety.

History

Even in the earliest days of polar exploration, ice-strengthened ships were used. These were originally wooden and based on existing designs, but reinforced, particularly around the waterline with double planking to the hull and strengthening cross members inside the ship. Bands of iron were wrapped around the outside. Sometimes metal sheeting was placed at the bows, stern and along the keel. Such strengthening was designed to help the ship push through ice and also to protect the ship in case it was "nipped" by the ice. Nipping occurs when ice floes around a ship are pushed against the ship trapping it as if in a vise and causing damage. This vice-like action is caused by the force of winds and tides on ice formations. Although such wind and tidal forces may be exerted many miles away, the ice transmits the force.

The first known steam-powered icebreaker was the "City Ice Boat No. 1", built by the city of Philadelphia in 1837. She was a wooden paddle steamer intended to break ice in the harbor. The first European steam-powered icebreakers were the Russian "Pilot" (1864) and the German "Eisbrecher I" (1871). [cite book |title= Port Engineering, Volume 1: Harbor Planning, Breakwaters, and Marine Terminals |edition= 4th ed. |author= Bruun P |isbn=0872018431 |date=1989 |publisher= Gulf Publishing Company |pages= p. 1375]

At the beginning of the 20th century several countries began to operate purpose-built icebreakers. Most were coastal icebreakers, but Russia and later the Soviet Union also built several oceangoing icebreakers of around 10,000 tonnes displacement. Several technological advances were introduced over the years, but it was not until the introduction of nuclear power in the Soviet icebreaker "Lenin" in 1959 that icebreakers developed their full potential.

World's largest icebreaker

In May 2007, sea trials were completed for the nuclear-powered Russian ice-breaker , NS "50 Years Since Victory" ( _ru. 50 лет Победы, transliterated as "50 Let Pobedy"). The vessel was put into service by Murmansk Shipping Company, which manages all eight state-owned nuclear icebreakers. The keel was originally laid in 1989 by Baltic Works of Leningrad (now St Petersburg); and the ship was launched in 1993 as the NS "Ural." This icebreaker was intended to be the sixth and last of the class. In 1994, outfitting was suspended as a consequence of Russia's temporary economic difficulties. The first of the class, the NS "Arkitika", entered service back in 1974 -- or in other words, a little more than thirty years separate the first and last of what is known as the Arktika class icebreaker. [ [http://www.shipsmonthly.com/auto/newsdesk/20070403154825ships.html "World's largest icebreaker,"] "Ships Monthly." May 2007.]

Function of icebreakers

Icebreakers are needed to keep trade routes open where there are either seasonal or permanent ice conditions. Icebreakers are expensive to build and very expensive to run, whether the icebreaker is powered by gas turbines, diesel-electric powerplant or nuclear energy. They are uncomfortable to travel in on the open sea: almost all of them have thick, rounded keels, and with no protuberances for stability, they can roll even in light seas. They are also uncomfortable to travel in when breaking through continuous thick ice due to constant motion, noise, and vibration.

A modern icebreaker typically has shielded propellers both at the bow and at the stern, as well as side thrusters; pumps to move water ballast from side-to-side; and holes on the hull below the waterline to eject air bubbles, all designed to allow an icebreaker stuck amidst thick ice to break free. Many icebreakers also carry aircraft (formerly seaplanes but now helicopters) to assist in reconnaissance and liaison.

Design and construction

Icebreakers are constructed with a double hull and watertight compartments in case of a breach. The ship's hull is thicker than normal, especially at the bow, stern, and waterline, using special steel that has optimum performance at low temperatures. The thicker steel at the waterline typically extends about 1 m above and below the waterline, and is reinforced with extra internal ribbing, sometimes twice the ribbing of a normal ship. The bow is rounded rather than pointed, allowing the vessel to ride up over the ice, breaking it with the weight of the vessel. The hull has no appendages likely to be damaged by the ice, and the rudder and propeller are protected by the shape of the hull. The propeller blades are strengthened, and the vessel has the ability to inspect and replace blades while at sea. [cite web|title=Icebreakers and ice strengthened ships|url=http://www.coolantarctica.com/Antarctica%20fact%20file/ships/icebreaker.htm|accessdate=2007-11-25]

Recent advances

[
USCGC "Healy" (WAGB-20)]

The optimal shape for moving through ice makes icebreakers uncomfortable in open water and gives them poor fuel efficiency.

In open water travel, icebreakers tend to roll side to side to the discomfort of the crew. Some new icebreakers such as the USCGC "Healy" make use of anti-roll tanks. Anti-roll tanks are incompletely filled ballast tanks which span the beam of the vessel. Ballast water in these tanks is allowed to move side to side; or slosh; as a free surface. Retarding baffles inside the anti-roll tank slow the side to side flow of water. By varying the water level inside the anti-roll tank, the natural frequency of the "slosh" is used to counteract the rolling of the vessel. Anti-roll tanks by their nature decrease a ships stability and must always be used with caution. Use of computer controlled valves allow for better control of these anti-roll tanks.

A greater concern is how well a ship cuts through waves. The ability of a ship to cut through waves can greatly affect its fuel efficiency and even its safety in a storm. Most ships use a sharp or bulbous bow to cut through waves and help prevent waves from slamming the bow of the ship. However, icebreakers have a round sled-like bow. They tend to slam into waves, which can be risky in high seas.Recent advances in ship propulsion have produced new experimental icebreakers. Electrically driven propellers are mounted to steerable pods under the ship. These Azimuthing Podded Propulsors, or "Azi-pods", improve fuel efficiency, ship steering, ship docking, and remove the need for rudders. Azipods also allow a ship to travel backwards as easily as it travels forwards. The double acting icebreaker is unique because its stern is shaped like an icebreaker's bow. Normally traveling forward, a double acting icebreaker uses a conventional ship bow for a more comfortable ride. When ice is encountered, the ship turns around and travels backwards through the ice. The MT "Mastera" and MT "Tempera" are two vessels using this new technology.

In the 1980s hovercraft were shown to be effective as icebreakers on rivers. Instead of displacing or crushing the ice from above, they work by injecting a bubble of air under the ice sheet, causing it to break off under it's own weight and be swept downstream by the current. The purpose is usually not to provide navigation channels but rather to prevent ice dams from forming on bridge structures, thus damaging them and causing local flooding.

See also

*List of icebreakers
*Manhattan (ship)
*Nuclear powered icebreaker

References

External links

* [http://www.canadiangeographic.ca/magazine/MA06/indepth/people.asp "Ice heroes"] : Read a Q&A with Canadian Coast Guard acting commanding officer
* [http://www.canadiangeographic.ca/magazine/MA06/indepth/people.asp Canadian Geographic] : View a Canadian Coast Guard slideshow
* [http://travellingwriter.blogspot.com/2005/09/icebreakers-pushing-limits-of.html Pushing the Limits] Short history of Russian icebreakers by Roderick Eime
* [http://www.youtube.com/watch?v=x1XMZTzELaE Icebreaker at the North Pole] : Video of nuclear icebreaker Yamal visiting the North Pole in 2001
* [http://books.nap.edu/openbook.php?record_id=11753&page=R1 Book "Polar Icebreakers in a Changing World: An Assessment of U.S. Needs" (2007)]