Transmit-after-receive time delay
- Transmit-after-receive time delay
In telecommunication, transmit-after-receive time delay is the time interval from removal of rf energy at the local receiver input until the local transmitter is automatically keyed on and the transmitted rf signal amplitude has increased to 90% of its steady-state value. "An Exception:" High-frequency (HF) transceiver equipment is normally not designed with an interlock between receiver squelch and transmitter on-off key. The transmitter can be keyed on at any time, independent of whether or not a signal is being received at the receiver input.
References
*Federal Standard 1037C and from MIL-STD-188
Wikimedia Foundation.
2010.
Look at other dictionaries:
Receive-after-transmit time delay — In telecommunication, receive after transmit time delay is the time interval between (a) the instant of keying off the local transmitter to stop transmitting and (b) the instant the local receiver output has increased to 90% of its steady state… … Wikipedia
Time division multiple access — This article is about the channel access method. The name TDMA is also commonly used in the United States to refer to Digital AMPS, which is an obsolete mobile telephone standard that uses TDMA to control channel access. Time division multiple… … Wikipedia
Space–time block code — This article deals with coherent space–time block codes (STBCs). For differential space–time block codes, see differential space–time codes.Space–time block coding is a technique used in wireless communications to transmit multiple copies of a… … Wikipedia
List of electronics topics — Alphabetization has been neglected in some parts of this article (the b section in particular). You can help by editing it. This is a list of communications, computers, electronic circuits, fiberoptics, microelectronics, medical electronics,… … Wikipedia
Real-time locating — Articleissues confusing=July 2008 refimprove=May 2008 essay=May 2008: This page specifically concerns operational aspects of RTLS. For methodology issues see locating engine. For technology issues see wireless. According to ISO/IEC JTC1 SC31 and… … Wikipedia
Routing in delay tolerant networking — concerns itself with theability to transport, or route, data from a source to adestination is a fundamental ability all communication networks musthave. Delay and disruption tolerant networks(DTNs), arecharacterized by their lack of connectivity … Wikipedia
SMPTE time code — SMPTE timecode is a set of cooperating standards to label individual frames of video or film with a timecode defined by the Society of Motion Picture and Television Engineers in the SMPTE 12M specification. Timecodes are added to film, video or… … Wikipedia
computer — computerlike, adj. /keuhm pyooh teuhr/, n. 1. Also called processor. an electronic device designed to accept data, perform prescribed mathematical and logical operations at high speed, and display the results of these operations. Cf. analog… … Universalium
USB — This article is about the computer bus to connect peripherals. For other uses of USB, see USB (disambiguation). Universal Serial Bus Original logo Type Computer Hardware Bus … Wikipedia
Voice over IP — Digital voice redirects here. For the commercial service, see Comcast Digital Voice. Voice over Internet Protocol (Voice over IP, VoIP) is a family of technologies, methodologies, communication protocols, and transmission techniques for the… … Wikipedia
