Plaited stitch (knitting)
- Plaited stitch (knitting)
In knitting, a plaited stitch is a single knitted stitch that is twisted clockwise (right over left) or counterclockwise (left over right), usually by one half-turn (180°) but sometimes by a full turn (360°) or more.
Methods
Plaited stitches can be produced in several ways. Knitting into the back loop produces a clockwise plaited stitch in the lower stitch being knitted (i.e., the loop that was on the left-hand needle.) The clockwise-plaited stitch is also called a left crossed stitch, since the left strand (i.e., the outgoing strand) of the loop crosses over the right incoming strand. Left-crossed stitches are sometimes called twisted stitches, although the latter term might be confused with similar terms from cable knitting. Conversely, a counterclockwise plaited stitch can be produced if the yarn is wrapped around the needle in the opposite direction as normal while knitting a stitch. Such a stitch is also called a "right crossed stitch", since the right incoming strand crosses over the left outgoing strand. Here, the plait appears in the upper stitch being knitted, i.e., in the new loop being formed. In the "brute-force" approach, the knitter can produce any sort of plaiting by removing the stitch to be knitted from the left-hand needle, twisting it as desired, then returning it to the left-hand needle and knitting it.
Applications in knitting
Both clockwise and counterclockwise plaited stitches are often repeated in wales, i.e., in "columns" of knitting, where they make attractive, subtly different ribbings. Fabrics made with plaited stitches are stiffer than normal and "draw in" sideways, i.e., have a smaller widthwise gauge.
Extra-long, "full-turn" clockwise plaited stitches can be made by knitting through the back loop and wrapping the yarn twice; this is an attractive stitch when repeated in a "row", creating openness and a change in scale that enlivens even simple stockinette or garter stitch.
Plaited stitches are also useful in increases and decreases, both for drawing the fabric together and for covering potential "holes" in the fabric.
As a method for correcting errors
As an aside, knitting through the back loop is a useful technique for "untwisting" stitches on the left-hand needle that "hang backwards". Such stitches are often produced when a knitted fabric is partially pulled out and some stitches are accidentally put back onto the needle with a backwards twist.
References
Wikimedia Foundation.
2010.
Look at other dictionaries:
Slip-stitch knitting — is a family of knitting techniques that use slip stitches to make multiple fabrics simultaneously, to make extra long stitches, and/or to carry over colors from an earlier row. Contents 1 Basic methods 2 Double knitting with slip stitches 3… … Wikipedia
Drop-stitch knitting — is a knitting technique for producing open, vertical stripes in a garment. The basic idea is to knit a solid fabric, then (deliberately) drop one or more stitches (i.e., draw a loop out from the loop below it, and so on repeatedly), producing a… … Wikipedia
Dip stitch (knitting) — In knitting, a dip stitch is made by knitting into a stitch (or even the space between stitches) of an earlier row. The most common type of dip stitch is to knit into the row below, which may be used for visual effect or to increase the number of … Wikipedia
Knitting — Knit redirects here. See also KNIT and Knitted fabric. Knitting is a method by which thread or yarn may be turned into cloth. Knitting consists of loops called stitches pulled through each other. The active stitches are held on a needle until… … Wikipedia
Knitting needle — Bamboo knitting needles A … Wikipedia
Continental knitting — Knitting with the yarn in one s left hand is commonly referred to as Continental knitting, German knitting, European knitting, or left hand knitting. Unlike English knitting, the yarn is held in the left hand; the motion of bringing the yarn… … Wikipedia
Decrease (knitting) — A decrease in knitting is a reduction in the number of stitches, usually accomplished by suspending the stitch to be decreased from another existing stitch or by knitting it together with another stitch. Contents 1 Methods of Single Decreasing… … Wikipedia
Hand-knitting — is a special case of knitting, in which the knitted fabric is produced by hand.Flat and circular knittingWeft knit fabrics can be divided into two types: those that have selvages (side edges) and those that are tubes, where the side edges have… … Wikipedia
Row counter (hand knitting) — Clover on needle row counters from Japan, 2000 2010 A row counter for hand knitting is a tally counter for counting rows or courses worked, for counting stitch pattern repetitions, or for counting increases or decreases of the number of stitches… … Wikipedia
Weaving (knitting) — In knitting, weaving is a family of techniques for introducing extra yarn(s) into a knitted fabric without knitting them. The extra yarns almost always follow the horizontal rows (courses) of knitting and, if visible, resemble a woven texture.… … Wikipedia
