Airsoft pellets

Airsoft pellets are spherical projectiles used in Airsoft models. Typically made of plastic, they typically range in size from 5.98 to 6.00 mm in diameter, though some long range models use 8 mm pellets. Often called "BBs", after the ammunition for BB guns (which are actually smaller and made of metal).

Composition

In addition to air soft pellets they are often made of plastic. Pellets are most commonly found in white and yellow, but since the plastics most commonly used are readily colored, many other colors are produced. Such colors include black, green, blue, orange, gold, red, and phosphorescent colors. Non-plastic pellets are generally the color of the material used for the exterior of the pellet.

Varieties of pellets

Biodegradable

Biodegradable pellets are available, and are often required by outdoor fields where sweeping up is not an option. Conventional pellets are a pollutant of the environment - most ordinary pellets have a mineral or petroleum-based center coated non-biodegradable plastics, ensuring they will stay in the environment for several hundred years if not collected. Biodegradable pellets are made of various types of resin, often developed for the agricultural industry, and better makes are certified as compostable.

There is a mixture of degradable processes being used, such as soil microbes and photosensitive degradation. Biodegradable pellet development is now producing ammo with all the characteristics of the best of the conventional, with homogeneous resin construction.

Various EEC countries now only permit biodegradable pellet ammunition to be used, and many land agents are also insisting on their use on rented land. Airsoft worldwide is very late in coming to universal usage of biodegradable products which paintball has long achieved with its munitions.

Tracers

Glow-in-the-dark pellets, known colloquially as "tracer" pellets, can be used in conjunction with a device that "charges" the pellets by flashing them with a burst of visible light on leaving the barrel, so that they remain luminescent in flight for use during nocturnal games/operations. This tracer unit is usually hidden from view, often disguised as a suppressor (silencer), or is included inside the magazine. There are also biodegradable Glow-in-the-dark pellets available.

Non-spherical pellets

There have also been airsoft models that use non-spherical pellets. The best known of these is the Asahi "Blade Bullet", which are now extremely difficult to find and quite expensive to buy. These were designed to be shot from the short-lived Asahi M700 and M40 premium grade rifles, which were produced in 1993. Compatibility with other airsoft guns is highly limited, especially due to their incompatibility with hop-up features.

Paintballs

Paint-filled pellets are also available, called markerballs, which are very similar to those used by paintball. Airsoft models equipped with the hop-up projectile stabilizing system are not able to use these, as the thin shells are liable to break in the barrel, soiling it with paint. These special pellets are also incompatible with Airsoft models using mechanized feed systems, such as high capacity magazines, for the same reason. Paintballs generally are bad for the gun and often cause jams or other internal problems. With some companies, the use of paintballs voids the airsoft gun's warranty.

Proprietary pellets

Also, during the early 1980s, most airsoft makers used their own proprietary pellets. Companies such as Masudaya and tradeMark Airguns had varieties of ammo, such as the flat-headed "Long Range" ammo used in the Masudaya Bolt series, or the soft rubber conical pellets used in the tradeMark Falcon-077. Fact|date=February 2007

Pellet weights

Pellet weight is an important factor when choosing pellets. The pellet's weight influences several aspects of pellet performance:

;Velocity:Lighter pellets achieve higher velocities, but are more prone to influence from external factors like wind. Lighter pellets also decelerate (lose velocity) faster than heavier pellets.

;Trajectory:The curvature of a projectile (trajectory) determines its range and heavier pellets tend to have slower velocities which result in much more curved trajectories. This can be negated in part by the use of a hop-up.

;Hardware:Heavier pellets may require a more powerful airsoft gun and often necessitates upgraded springs and other gun parts.

A player's choice of pellet weight is governed by their gaming style, airsoft gun (internals), game location (in/outdoor), high/low range and fps regulations.

6 mm pellet weights and their usage

*0.11 g - Manufactured by HFC, same use as .12 gram. Uncommon.
*0.12 g - Used by all low grade weapons such as some spring pistols (which can use .20) and mini electrics. High velocity and low stability. Not to be used in high end AEGs such as Tokyo Marui and Classic Army. These pellets usually have a small air pocket in them.
*0.15 g - Same uses as 0.12 g. Uncommon. Not to be used in high end Automatic Electric Guns (A.E.G.s) such as Tokyo Marui and Classic Army
*0.16 g - Essentially the same as the 0.15 g pellets. Very uncommon.
*0.20 g - Standard weight for most weapons. AEGs use these or slightly heavier pellets. These pellets are usually white.such as BB king bullet in China. (http://www.bbkingball.com/)
*0.23 g - Heavier pellets for AEGs. Blends speed of 0.20 g with range and accuracy of 0.25 g. Made popular by Tsunami Airsoft
*0.24 g - An oddity. Only known manufacturers are Airstrike (a subsidiary of Daisy) and Crosman
*0.25 g - Heaviest weight for standard AEGs, blowback and spring guns. Tokyo Marui standard AEG, gas, and spring guns are set at the factory for 0.25 gram BB's, and they usually include a package of 200 of these with the gun.
*0.28 g - For upgraded AEGs or sniper rifles. Significantly cheaper than 0.30 g but yields similar performance
*0.29 g - Maruzen Super Grandmaster BBs, designed for their Air Precision Shooting series of guns. One of the most precisely ground and accurate BBs availableVerify source|date=July 2007, but cost more than other alternatives. These also can come in aluminum versions, which will hurt more than plastic.
*0.30 g - Standard weight for most sniper rifles. Western Arms pellets for their gas blowback pistol series. Uncommon.
*0.32 g - Also standard for sniper rifles. Offer best balance of velocity and stability for most spring and gas sniper rifles.
*0.36 g - Heavier pellets for sniper rifles. Very slow but have high stability.
*0.43 g - For the highest level of upgrades in spring and gas sniper rifles. Usually graphite coated.
*0.88 g - Possibly the heaviest type of BB available. Usually made of steel and comes with a polished finish. Rarely used and often hard to find.

8 mm pellet weights

*0.27 g - Low weight
*0.34 g (Normal)- Standard weight
*0.35 g (Biodegradable)- Standard weight
*0.4 g
*0.45 g - Heaviest weight

Pellet ballistics

Pellet velocity, energy and weight

The pellet velocity of automatic electric guns is determined in large part by the tension of their main spring and so there tends to be a stratification of values. The most common airsoft velocity limits are between 365 to 400 ft/s for AEGs and 450 to 550 ft/s for single shot guns (sniper rifles). Below are some common speeds of airsoft pellets.

* As for comparison purposes, 3.00 g is the typical weight for a paintball pellet. At this weight a pellet flying at 90 m/s results in 12.54 J and 14.99 J for 100 m/s. Such energy levels and weight are not used on Airsoft, but comparing them with airsoft energy levels is useful to show the presence of different collisions in these sports. Higher energy but different collisions read Elastic collisions (airsoft) and Inelastic collisions (paintball) topics for further information.
* Red line in speed vs energy image is the usual Crony (chronograph) weight for 6 mm (0.20 g).

Dangers to humans

Airsoft pellets typically leave small wheals (welts) on human targets. While mildly painful, pellets are not especially damaging to the skin. Eye protection is universally required to prevent damage to eyes. It is also often recommended that full face masks be used during airsoft matches to protect the players' teeth and ears.

Although there have been no documented cases in airsoft, there is a possible hazard when dealing with graphite-coated pellets. In the early days of paintball some players would coat their rounds with graphite so that they would feed into the gun better. Players started to find that if any rounds broke the skin the wound would not properly heal, leaving a scar. Players and field owners should be aware that this problem may exist in the realm of airsoft as well.

The following excerpts are from the United Kingdom Parliament's "Principles of firearms control", Home Affairs Select Committee Second Report, 6 April 2000, expound on the level of danger involved with low-energy projectiles:

"25. The Firearms Act 1968 defines a firearm "a lethal barreled weapon of any description from which any shot, bullet or other :missile can be discharged". [51] In this context, a "lethal weapon" means a weapon capable of firing a projectile with sufficient :force to inflict more than a trivial injury, i.e. with a force sufficient to puncture the skin. [52] The force with which a firearm :is able to deliver a projectile is normally expressed in terms of the kinetic energy it generates at its muzzle—the "muzzle energy". :This energy is normally expressed in units of foot-pounds (ft·lbf) or joules (J). [53]

"26. The Home Office and the Forensic Science Service considers that the lowest level of muzzle energy capable of inflicting a penetrating wound is one foot pound force (1.35 J): below these power levels, weapons are "incapable of penetrating even vulnerable parts of the body, such as the eye". [54] However, more recent analysis by the Forensic Science Agency for Northern Ireland has indicated that a more reasonable assessment of the minimum muzzle energy required to inflict a penetrating wound lies between 2.2 and 3.0 ft·lbf (3 to 4 J). [55] We will deal more fully with this discrepancy at paragraphs 123 to 130 below."

"123. The power level at and above which an air weapon is considered a firearm in law is presently set at 1 ft·lbf. However, we note above that the Forensic Science Agency of Northern Ireland has more recently assessed the power level at which a barreled weapon is capable of inflicting a lethal wound as between 2.2 and 3 ft·lbf, and the Secretary of State for Northern Ireland has proposed that the law relating to firearms in Northern Ireland be amended to take this into account. [201] "

On another document also regarding firearms, "The Eleventh Annual Report of the Firearms Consultative Committee", the penetration levels lies between 2 and 3 J based on a research for US Army and DiMaio's work in "Minimal Velocities Necessary for Perforation of Skin by Air Pellets and Bullets, Journal of Forensic Sciences".

Hop-up & the Magnus Effect

The term Hop-up, short for High Operation Power Up, describes the back-spin put on airsoft pellets and BB's to increase their range and (vertical) accuracy via Magnus effect. Hop-up acts somewhat like the rifling on the barrel of a firearm, but without the increase in horizontal accuracy. Also, being light-weight, airsoft pellets are still affected by wind when fired.

Airsoft hop-up devices apply a backspin to the pellet so that the pressure force acts on the pellet opposite to the direction that gravity is pulling it. This causes the pellet to fall less over a given distance than it would without the spin applied to it.

In airsoft guns this is often implemented as a rubber piece at the rear of the barrel that is thicker at the top of the barrel than the bottom. As the pellet moves past this piece it tends to roll, inducing a backspin. This is occasionally adjustable so that the effect can be tuned to suit the weight or speed of the pellet, and each player's preference.

The primary cause of the apparent lift on an airsoft pellet is the Magnus effect. There is a layer of non-moving air on the surface of the pellet (boundary layer). This is why a golf ball has dimples; this layer acts like ball bearings. In the case of a spinning ball, this layer gets thrown off at an angle. Newton's laws say that in order for air to be thrown in one direction, the ball has to move in the other direction. According to the Magnus explanation, the rotating ball would throw air downward and to the rear, thus giving lift. The air on the bottom of the ball is slowed down, so when the separated air comes back together, it is lower than the middle of the ball, appearing like a comet's tail pointing down. This can be verified in wind tunnels and is very well documented in fluid dynamics textbooks.

Manufacturers