The SCSI Receive Diagnostic Results command is used to interrogate the results of a self-test. The self-test must have been triggered by a previous Send Diagnostic command which would have defined the self-test required. This is usually associated with one of the available diagnostic pages.
The CDB structure for this command is:
Wikimedia Foundation. 2010.
SCSI Send Diagnostic Command — The SCSI Send Diagnostic command is used to instruct a target device to perform a self test on a specific LUN. The CDB structure is:The special parameter fields in the CDB have the following meaning:*PF Page Format: **0 SCSI 1 compliant (vendor… … Wikipedia
SCSI diagnostic pages — SCSI target devices provide a number of SCSI diagnostic pages. These can be used by a Send Diagnostic command to tell a target device to run a specialised self test. The Receive Diagnostic Results command is used where the results from the self… … Wikipedia
SCSI Enclosure Services — Most recent SCSI enclosure products support a protocol called SCSI Enclosure Services (SES). The initiator can communicate with the enclosure using a specialised set of SCSI commands to access power, cooling, and other non data characteristics.… … Wikipedia
SCSI element codes — SCSI Enclosure Services (SES) devices contains a number of elements, each of which is defined by a one byte SCSI element code. There are many different element codes defined to cover various devices as shown in the list below. List of SES element … Wikipedia
SCSI — Small Computer System Interface, or SCSI (pronounced skuh zee [ [http://www.bartleby.com/61/56/S0175650.html SCSI] . American Heritage Dictionary .] [cite book|title=The Book of SCSI|last=Field|pages=1] ), is a set of standards for physically… … Wikipedia
Enclosure Services Interface — The Enclosure Services Interface (ESI) is a computer protocol used in SCSI enclosures. This is part of a chain of connections that allows a host computer to communicate with the enclosure to access its power, cooling, and other non data… … Wikipedia
SES-2 Enclosure Management — The introduction of Serial Attached SCSI (SAS) as the most recent evolution of SCSI required to re define the related standard for enclosure management, called SCSI Enclosure Services . SES 2, or SCSI Enclosure Management 2 first revision was… … Wikipedia
USB — This article is about the computer bus to connect peripherals. For other uses of USB, see USB (disambiguation). Universal Serial Bus Original logo Type Computer Hardware Bus … Wikipedia
Modbus — is a serial communications protocol published by Modicon in 1979 for use with its programmable logic controllers (PLCs). Simple and robust, it has since become one of the de facto standard communications protocols in the industry, and it is now… … Wikipedia
