Housewrap

Housewrap

Housewrap defines all synthetic replacement materials for sheathing tar paper. These materials are all lighter in weight and usually wider than asphalt designs, so contractors can apply the material much faster to a house shell. Housewrap functions as a moisture barrier, preventing rain from getting into the stud wall construction while allowing moisture vapor to pass out from the house's interior living space to the exterior. If moisture from either direction is allowed to build up within stud or cavity walls, mold and rot can set in and fiberglass or cellulose insulation will lose its R-value due to heat-conducting moisture.

Major types of housewrap

* asphalt-impregnated paper or fiberglass (the original material, still widely used)
* micro-perforated, cross-lapped films
* films laminated to spunbond nonwovens
* films laminated or coated to polypropylene wovens
* supercalendered, wetlaid polyethylene fibril nonwoven ("Tyvek")

Installation

Housewrap must be both waterproof and have a high Moisture vapor transmission rate (MVTR) to be effective. [cite web |url=http://www.buildernewsmag.com/viewnews.pl?id=21 |title=Housewrap Felt or Paper: Comparing specs on weather barriers |accessdate=2008-08-12 |first=Ryan |last=Reed |work=BUILDERnews Magazine |publisher=Pacific NW Publishing, Inc |month=May |year=2004] It must also take handling abuse during installation and be resistant to UV. Housewrap is often left exposed for some time after construction, awaiting exterior sheathing installation. The original asphalt paper design, while heavy and slow to install, is still a contender. It can be nailed and abused during installation and still function. Some new designs must be installed carefully or they will slightly rip or tear during installation, possibly allowing for water infiltration at the damaged areas. Most newer designs do not "seal" well against nails or staples like asphalt products.

Housewrap is installed over the sheathing and behind the exterior siding. Siding can be vinyl, wood clapboard, cedar shingles or brick facade. In all cases, the housewrap is the last line of defense in stopping incoming water or exterior water condensation from getting into the wooden stud wall.

Properties

* typical MVTR ~200 grams/100 square-inches/24hours (or greater, i.e., Tyvek is ~400))
* typical 2 ounces/square-yard (varies greatly with manufacturer)
* typical width 90" on a 3" core

References


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Tar paper — is a heavy duty paper used in construction. Tar paper is made by impregnating paper with tar, producing a waterproof material useful for roof construction. Roofing felt, one common type of tar paper, is a glass fiber or polyester fleece… …   Wikipedia

  • Tyvek — (TIE veck) is a brand of flashspun high density polyethylene fibers, a synthetic material; the name is a registered trademark of the DuPont Company. The material is very strong; it is difficult to tear but can easily be cut with scissors or any… …   Wikipedia

  • DuPont Experimental Station — Aerial photo of the Dupont Experimetal Station in the summer of 1997. The Brandywine Creek is in the immediate foreground and right. The stone building in the center of the picture is the original clubhouse of the Dupont Country Club which has… …   Wikipedia

  • Air barrier — Air barriers control air leakage into and out of the building envelope. This allows for more durable buildings as moisture is kept out and also results in significant energy savings. Air barrier products may take several forms: *Mechanically… …   Wikipedia

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”